DOWNLOAD Sharp R-334 (serv.man6) Service Manual ↓ Size: 688.48 KB | Pages: 29 in PDF or view online for FREE

7

ENGLISH

Plug in the oven.
1. The oven display will flash:

2. Touch the STOP button the display will show:

To set the clock, see below.

Using the STOP button
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.

Example:
To set the 24 hour clock to 23:35 

Choose the 24 hour
clock.

1. Choose the clock function.

(12 hour clock)

2. Set the hours. Rotate the

TIMER/WEIGHT/PORTION
knob until the correct hour is
displayed (23).

4. Set the minutes. Rotate the TIMER/

WEIGHT/PORTION knob until the
correct minute is displayed. (35).

5. Press the MICROWAVE

POWER LEVEL button to
start the clock.

NOTE: 
1. You can rotate the TIMER/WEIGHT/PORTION

knob clockwise or counter-clockwise.

2. Press the STOP button if you make a mistake

during programming.

3. If the electrical power supply to your microwave

oven is interrupted, the display will intermittently

show               after the power is reinstated. If this
occurs during cooking, the programme will be
erased. The time of day will also be erased. 

4. When you want to reset the time of day, follow the

above example again.

There are two setting modes: 12 hour clock and 24 hour clock.
1. To set the 12 hour clock, hold the MICROWAVE POWER LEVEL button

down for 3 seconds.

will appear in the display.

2. To set the 24 hour clock, press the MICROWAVE POWER LEVEL button once

more after Step 1, in the example below

will appear in the display.

x1 and hold
for 3 secs.

To set the clock, follow the example below.

3. Press the MICROWAVE

POWER LEVEL button
to change from hours to
minutes.

 R-334 English  22/1/01  12:16 pm  Page 7

8

To set the microwave power level :
1. Rotate the TIMER/WEIGHT/PORTION knob clockwise or counter-clockwise to select cooking time. 
2. Press the MICROWAVE POWER LEVEL button until the desired power level appears on the display. (If the

MICROWAVE POWER LEVEL button is touched once, 

will be displayed.  If you miss your

desire level, continue pressing the MICROWAVE POWER LEVEL button until you reach the level
again).

3. Press the +1min/START button. 

NOTE: If the power level is not selected, 100 P is automatically set.

Your oven has 5 power levels. To choose the power
level for cooking, follow the advice given in the
recipe section. Generally the following
recommendations apply:

100 P - (HIGH output = 900 W) used for fast
cooking or reheating e.g. soup, casseroles, canned
food, hot beverages, vegetables, fish, etc.

70 P - (MEDIUM HIGH output = 630 W) used for
longer cooking of dense foods such as roast joints,
meat loaf and plated meals, also for sensitive
dishes such as cheese sauce and sponge cakes. At
this reduced setting, the sauce will not boil over
and food will cook evenly without over cooking at
the sides.

50 P - (MEDIUM output = 450 W) for dense foods
which require a long cooking time when cooked
conventionally, eg. beef dishes, it is advisable to
use this power setting to ensure the meat will be
tender.

30 P - (MEDIUM LOW output = 270 W Defrost
setting) to defrost, select this power setting, to
ensure that the dish defrosts evenly. This setting is
also ideal for simmering rice, pasta, dumplings and
cooking egg custard.

10 P - (LOW output = 90 W) For gentle
defrosting, eg. cream gateaux or pastry.

 R-334 English  22/1/01  12:16 pm  Page 8

9

ENGLISH

Example:
Suppose you want to heat soup for 2 minutes and 30 seconds on 70 P microwave power.

Your oven can be programmed for up to 90 minutes.
(90.00) The input unit of cooking (defrosting) time
varies from 10 seconds to five minutes. It depends on
the total length of the cooking (defrosting) time as
shown on the table.

0-5 minutes

10 seconds

5-10 minutes

30 seconds

10-30 minutes

1 minute

30-90 minutes

5 minutes

1. Enter desired cooking

time by rotating the
TIMER/ WEIGHT/
PORTION knob
clockwise.

2. Choose desired power

level by pressing
MICROWAVE POWER
LEVEL button twice.

3. Press +1min/START

button once to begin
cooking.

NOTE:
1. When the door is opened during the cooking process, the cooking time on the digital display stops

automatically.  The cooking time starts to count down again when the door is closed and the +1min/START
button is pressed.

2. If you wish to know the power level during cooking, press the MICROWAVE POWER LEVEL button.  As

long as your finger is touching the MICROWAVE POWER LEVEL button, the power level will be displayed.

3. You can rotate the TIMER/WEIGHT/PORTION knob clockwise or counter-clockwise.  If you rotate the

knob counter-clockwise, the cooking time will decrease from 90 minutes by degrees.

 R-334 English  22/1/01  12:16 pm  Page 9

10

A maximum of 3 sequences can be input, consisting of manual cooking time and mode.

Example:
To cook:

5 minutes on 100 P power 

(Stage 1)

16 minutes on 30 P power

(Stage 2)

STAGE 1
1. Enter the desired cooking

time by rotating TIMER/
WEIGHT/PORTION
knob.

2. Choose the desired power

level by pressing the
MICROWAVE POWER
LEVEL button once.

STAGE 2
3. Enter desired time by

rotating TIMER/
WEIGHT/PORTION
knob.

4. Choose the desired power

level by pressing the
MICROWAVE POWER
LEVEL button four times.

5. Press the +1min/START

button once to begin
cooking.

(The oven will begin to cook for 5 minutes and 100 P, and then for 16 minutes on 30 P).

 R-334 English  22/1/01  12:16 pm  Page 10