DOWNLOAD Sharp R-26STM (serv.man15) Service Manual ↓ Size: 1.06 MB | Pages: 40 in PDF or view online for FREE

35

The wires in the mains cable are colour coded as
shown:
Green and yellow stripes

=

Blue

=

Brown

=

As the colours in the mains lead of your oven
may not correspond with the coloured marking
identifying the terminals in your plug, connect the
wires as described:
• The green and yellow wire to the plug terminal

marked E or

or coloured green or

coloured green and yellow.

• The blue wire to the plug terminal marked N

or coloured black or coloured blue.

• The brown wire to the plug terminal marked L

or coloured red or coloured brown.

Make sure the terminal screws are tight and the
cable is held securely by the cable grip where it
enters the plug.

Like most appliances in your home, your oven
must be connected to a single phase 230-240V,
50Hz alternating current supply.

If you do not make the proper electrical
connections you might damage the oven or injure
yourself. Neither SHARP nor the supplier will be
liable if this happens.

• If you are unable to resolve a problem using

the checks covered on the last few pages, do
not attempt to service this microwave
oven yourself.

• Contact the dealer or supplier from whom the

oven was purchased in order to obtain service.
Where this is not possible, please contact the
SHARP Customer Information Centre.
Telephone: 08705 274277 (office hours).

• For general information and assistance with

oven queries, please contact our
Customer Information Centre:
U.K.: 08705 274277 (office hours)
Ireland: 01 676 0648 (office hours)
Website: http://www.sharp.co.uk/support

• Replacement accessories may be obtained

from our main parts distributor: 
Willow Vale Electronics Ltd.
Telephone: 0121 766 5414

R26STM_Part2.qxd  21/12/05  2:54 PM  Page 10

36

Sharp Electronics (UK) Ltd. (“Sharp”) guarantees that for a period of 12 months from the date of
purchase the enclosed product will be free from defects in materials and workmanship. Sharp agrees to
provide for the repair or, at its option, the replacement of a defective product. Sharp reserves the right
to replace defective parts, or the product, with new or refurbished items. Items that are replaced
become the property of Sharp.

To benefit from this guarantee, any fault that occurs must be notified to Sharp, or its appointed Service
Facility, within one year from the date the product was purchased. Proof of purchase, such as a receipt
or invoice, must be provided.

If the product is exchanged, the replacement shall be covered by the unexpired portion of the original
guarantee.

In the unlikely event of the product requiring repair, please contact the supplier from whom it was
purchased. Where this is not possible, please contact an appointed Service Facility. Details of Service
Facilities appointed by Sharp can be obtained from www.sharp.co.uk/customersupport/service or
by contacting the Sharp Customer Information Centre whose details are given below.

This guarantee shall only apply to faults that are due to inferior workmanship or materials. It does not
cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with the
product, or repair other than by a Service Facility appointed by Sharp.

The product is intended for private domestic use only. The guarantee will not apply if the product is
used in the course of a business, trade or profession.

No person has any authority to vary the terms or conditions of this guarantee.

This guarantee is offered as an additional benefit to your statutory rights, and does not affect these
rights in any way.

You may not transfer your rights or obligations under this warranty to anyone else.

If you have any difficulty operating the product, or would like information on other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.

Sharp Electronics (UK) Ltd is a company registered in England under number 965877

whose registered office is at

Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE.

The guarantee does not cover:
• Glass/ceramic turntables, as they can be damaged by handling/cleaning methods.
• Faults resulting from inadequate cleaning. Regular cleaning is required to prevent a build up of food

residue that can also affect the performance of the product.

• Carriage costs to or from the repair centre.

www.sharp.co.uk/customersupport

08705 274277 (01 676 0648 in Southern Ireland)

R26STM_Part2.qxd  21/12/05  2:54 PM  Page 11

37

AC Line Voltage  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Single phase 230-240V, 50Hz

Power Consumption:

Microwave  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.22kW

Input Current:

Microwave  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.2A

Output Power:

Microwave  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .800W (IEC 60705)

MAFF Heating Category  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E

Microwave Frequency  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2450Mhz

*

(Group 2/Class B)

Outside Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .460(W) x 275(H) x 380(D)mm

Cavity Dimensions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .319(W) x 211(H) x 336(D)mm

**

Oven Capacity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 litres

**

Cooking Uniformity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Turntable diameter 272mm

Weight  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Approx. 12kg

*

This Product fulfils the requirement of the European standard EN55011. In conformity with this
standard, this product is classified as group 2 class B equipment. Group 2 means that the equipment
intentionally generates radio-frequency energy in the form of electromagnetic radiation for the heat
treatment of food. Class B equipment means that the equipment is suitable to be used in domestic
establishments.

**

Internal capacity is calculated by measuring maximum width, depth and height.
Actual capacity for holding food is less.

As part of a policy of continuous improvement,
we reserve the right to alter design and
specifications without notice.

No part of this publication may be reproduced,
stored in a retrieval system or transmitted in
any form, electronic, mechanical,
photocopying, recording, translating or other
means without prior permission from SHARP
Electronics (U.K.) Ltd.

The illustrations, technical information and data
contained in this publication are, to our best
knowledge, correct at the time of going to print.
The right to change specifications, at any time,
without notice, is reserved as a part of our policy
of continuous development and improvement.

R26STM_Part2.qxd  21/12/05  2:54 PM  Page 12

Manchester, U. K.

U.K.: 08705 274277 (office hours)

Ireland: 01 676 0648 (office hours)

Website: http://www.sharp.co.uk/support

PRINTED IN THAILAND 

TINSEB116WRRZ-K61

R26STM_Part2.qxd  21/12/05  2:54 PM  Page 13