DOWNLOAD Sharp R-232M (serv.man2) Service Manual ↓ Size: 1.16 MB | Pages: 36 in PDF or view online for FREE

3

1  DIGITAL DISPLAY
2  AUTO COOK/DEFROST button
3  POWER LEVEL button
4  STOP/CLEAR button
5  AUTO MINUTE/START button
6  TIME/WEIGHT dial
7  DOOR OPENING button

KG

TURN

STIR

PCS MICRO COOK

Auto Cook
/Defrost

Time/Weight

Power Level

Stop/Clear

Auto Minute
/Start

R-232M O/M&C/B  11/6/99  11:43 am  Page 3

4

Oven Use:
• The oven is for domestic food preparation only.

Never operate when empty.  

• Do not leave or store anything inside the oven

when not in use.

• Never attempt to use the oven with the door open.

It is important not to force or tamper with the door
safety latches. This may result in exposure to
microwave energy.

• Never operate the oven with any object caught in

the door sealing surfaces, this again may cause
microwave leakage.

• Do not insert fingers or objects in the holes of the

door latches or air-vent openings, as this may
damage the oven and cause an electric shock.     

• If water or food drops inside the air vent openings

switch off the oven immediately, unplug it and call a
Service Technician appointed by SHARP.  

• Never attempt to move the oven while it is

operating.

Pacemaker: If you have a heart pacemaker,
consult your doctor or the pacemaker manufacturer
prior to oven use.

Do not allow anyone to play with the oven, or lean or
swing on the oven door.

1.Remove all packing materials. Do not remove

the plastic film from the inside of the oven
window as this protects it from dirt.

2.Place the oven on a secure, level surface, strong

enough to take the oven weight, plus the
heaviest item likely to be cooked in the oven.

3.Do not place the oven where heat, moisture or

high humidity are generated, (for example, near
or above a  conventional oven) or near
combustible materials (for example, curtains). Do
not block or obstruct air vent openings, as
obstructions may ignite due to the emission of
hot air.  Do not place items on top of the oven.

4.Make sure the power supply cord is undamaged

and that it does not run under the oven or over
any hot or sharp surfaces. 

5.The socket must be readily accessible so that it

can be easily unplugged in an emergency.

6.Do not use the oven outdoors.

R-232M O/M&C/B  11/6/99  11:44 am  Page 4

5

Plug in the oven.
1. The oven display will flash:
2. Press the STOP/CLEAR button, the display will

show:

To set the clock, see the following page.

1.

2.

Stop/Clear

BUILDING-IN-KIT.
This oven is not designed to be built into a kitchen unit.
IMPORTANT! ELECTRICAL CONNECTION.
• Do not allow water to come into contact with the

power supply cord or plug.

• Insert the plug properly into the socket as the plug

may otherwise overheat and catch fire.

• Do not connect other appliances to the same socket

using an adaptor plug as it may cause the house
wiring to overheat and catch fire.

• If the power supply cord of this appliance is

damaged, it must be relaced by a special cord. 
The exchange must be made by an authorised
SHARP service agent. 
A defective plug, power supply cord or socket may
overheat and catch fire during operation or cause
an electrical shock.

• When removing the plug from the socket always

grip the plug, never the mains lead as this may
damage the power supply cord and the
connections inside the plug.

• The product is fitted with a re-wireable plug. Should

it not be suitable for the socket outlet in your home,
remove the plug and fit an appropriate type,
observing the wiring code given in “To replace the
mains plug” on page 24.

If you wish to remove or replace the plug supplied,
ensure the plug is removed properly and not cut off.
When replacing the plug please ensure that you use a
BSI or ASTA approved plug to BS1363, this should be
fitted with a brown coloured 13 amp fuse approved
by BSI or ASTA to BS1362. If you have any doubt
about electrical connection seek the help of a
qualified electrician. 

WARNING 
THIS APPLIANCE MUST BE EARTHED
To wire an appropriate plug, follow the
wiring code on page 24.

R-232M O/M&C/B  11/6/99  11:44 am  Page 5

6

Example:
To set the 24 hour clock to 23:35 

Choose the 24 hour
clock.

Choose the clock function.
(12 hour clock).

Set the hours. Rotate the TIME /
WEIGHT dial clockwise until the
correct hour is displayed (23).

Set the minutes (35).

Start the clock.

NOTE: 
1. You can rotate the TIME/WEIGHT dial clockwise

or counter-clockwise.

2. Press the STOP/CLEAR button if you make a

mistake during programming.

3. If the electrical power supply to your microwave

oven is interrupted, the display will intermittently
show                  after the power is reinstated. If
this occurs during cooking, the programme will be
erased. The time of day will also be erased. 

4. When you want to reset the time of day, follow the

above example again.

There are two setting modes: 12 hour clock and 24
hour clock
1. To set the 12 hour clock, hold the POWER LEVEL

button down for 3 seconds.

will appear in the display.

2. To set the 24 hour clock, touch the POWER LEVEL

button once more after Step 1, in the example
below

will appear in the display.

x1 for 3 secs.

Then when setting the time for 12 or 24 hour clock, follow the example below.

Time/Weight

Change from hours to
minutes.

Time/Weight

Power Level

Power Level

Power Level

Power Level

Power Level

Power Level

R-232M O/M&C/B  11/6/99  11:44 am  Page 6