Sharp VENTA HANDHELD (serv.man10) User Manual / Operation Manual ▷ View online
31
Changing the device name
The device name is used to identify the OT-200 in the following situations:
• Connecting with a computer
• Connecting to a network
Refer to the following to change the device name.
• Connecting with a computer
• Connecting to a network
Refer to the following to change the device name.
1. Tap Start→ Settings → System →
About.
2. Select the Device ID tab.
3. Enter a name. The device name must
3. Enter a name. The device name must
begin with a letter, consist of letters
from A to Z and numbers from 0 to 9,
and should not contain spaces.
4. Tap the OK button.
32
C H A P T E R 2 L E A R N I N G T H E B A S I C S
Entering owner information
Enter your personal information, such as your name and address, so that the OT-200 can be returned to you if
it is lost. Refer to the following to enter the information.
1. Tap Start → Settings → Personal →
Owner Information.
2. On the Identification tab, enter your
personal information.
33
Recalibrating the screen
If your stylus seems to be out of sync with the screen, then recalibrate the screen using your stylus.
1. Tap Start → Settings → System →
Screen.
2. On the General tab, tap the Align
Screen button.
3. Follow the displayed instructions
to recalibrate. Please use the stylus
to calibrate the screen for better
accuracy.
34
C H A P T E R 2 L E A R N I N G T H E B A S I C S
Setting the date and time
Refer to the following to set date and time.
1. Tap the status bar.
2. Tap the Clock icon.
2. Tap the Clock icon.
3. Change the date or time and select the
correct time zone.
4. Tap the OK button.
Click on the first or last page to see other VENTA HANDHELD (serv.man10) service manuals if exist.