Sharp UP-X200 (serv.man3) Handy Guide ▷ View online
Enhancement-2 Release May 2007 (V1.6.x.x)
•
Individual terminal reports are introduced at the POS server via the
BackOffice and accessible at the Frond End by Macro keys.
(Now always available for Transactions Reports)
BackOffice and accessible at the Frond End by Macro keys.
(Now always available for Transactions Reports)
UP-X300 Enhancement 2 features
Å Selectable for PLU’s
and Department.
Enhancement-2 Release May 2007 (V1.6.x.x)
UP-X300 Enhancement 2 features
B.O selection via new card for terminal selection:
Key sequence (Macro or manual entry) at the F.E. terminal:
•
Start Terminal No. / End Terminal No. / Report Job Number (as at V 1.5.0.3)
Æ [Report
key]
Example of Terminal 1 to Terminal 3: 00010003 Report Job Number
Example of Terminal 1 to Terminal 3: 00010003 Report Job Number
Æ [Report key]
Individual terminal reports and a consolidated report of the selected terminals are printed.
•
Example of report for only terminal 1:
0001Report Job Number (10111100)
0001Report Job Number (10111100)
Æ [Report key] . (Displays the B.O Transaction X-
report)
Enhancement-2 Release May 2007 (V1.6.x.x)
•
Definition by a new system parameter if stock counting is disabled.
UP-X300 Enhancement 2 features
ÅNew parameter
Enhancement-2 Release May 2007 (V1.6.x.x)
•
Additional ini file for BackOffice access without B.O “Lock In” screen
(recommended for Sharp internal and Dealer usage only)
(recommended for Sharp internal and Dealer usage only)
Place special file “HOE.ini” with the following contents directly under the folder \ Hard
Disk
Disk
•
[BackOffice]
Auto=1
User=Dealer
Password=13974682
OpLevel=1
Auto=1
User=Dealer
Password=13974682
OpLevel=1
Note: There is no BackOffice authority control with the HOE.ini file installed.
•
[BackOffice]
Auto=1
User=Operator
Password=Operator
OpLevel=6
Auto=1
User=Operator
Password=Operator
OpLevel=6
•
[BackOffice]
Auto=1
User=Supervisor
Password=Supervisor
Auto=1
User=Supervisor
Password=Supervisor
•
OpLevel=5
UP-X300 Enhancement 2 features
The following possibilities and others can also be realised with this file:
With the above HOE.ini file installed it is no longer necessary to enter the “dealer ID and Password for entry into Back Office
Click on the first or last page to see other UP-X200 (serv.man3) service manuals if exist.