Sharp RZ-X735 (serv.man3) Service Manual ▷ View online
23
Assembly & disassembly the LCD CDP
Assembly the LCD CDP (Customer Display) (optional)
To assemble the LCD CDP follow these steps:
To assemble the LCD CDP follow these steps:
Locate the LCD CDP connecting plate on the back
panel of RZ-X735F and align the video and power
cables through the left hole of the plate.
panel of RZ-X735F and align the video and power
cables through the left hole of the plate.
1
Tighten four screws to install the LCD CDP
on the back panel.
on the back panel.
Connect the VGA cable to the VGA port
of RZ-X735F.
of RZ-X735F.
2
3
24
Disassembly the LCD CDP (Customer Display) (optional)
To disassemble the LCD CDP, follow these steps:
To disassemble the LCD CDP, follow these steps:
Disconnect the power cable from the DC Outlet
jack of RZ-X735F.
jack of RZ-X735F.
1
Disconnect the VGA cable from the VGA port
of RZ-X735F.
of RZ-X735F.
2
Connect the power cable to the DC Outlet
jack of RZ-X735F.
jack of RZ-X735F.
4
25
Remove the LCD CDP from RZ-X735F.
4
Remove screws fixed the LCD CDP.
3
26
The LCD bracket can be removed from the standard stand by removal of 4 screws, then
remounted to the unit. Please see below picture.
remounted to the unit. Please see below picture.
The screw length depends on the thickness of the VESA stand plate combined with the
LCD bracket. Insure that the end of the screw which will be turned into the main unit is
not longer than 7mm. (NOTE: black screws should be used instead of silver ones. This is
only an example for visibility.)
LCD bracket. Insure that the end of the screw which will be turned into the main unit is
not longer than 7mm. (NOTE: black screws should be used instead of silver ones. This is
only an example for visibility.)
VESA stand
LCD bracket
Max, 7mm length
LCD bracket
RZ-X735F VESA MOUNTING
RZ-X735F VESA MOUNTING
Due to the fanless design of the RZ-X735F, it is important to have the LCD bracket properly
mounted to the main unit. Please see below picture which shows the LCD bracket
disassembled from the main unit:
Due to the fanless design of the RZ-X735F, it is important to have the LCD bracket properly
mounted to the main unit. Please see below picture which shows the LCD bracket
disassembled from the main unit:
Click on the first or last page to see other RZ-X735 (serv.man3) service manuals if exist.