DOWNLOAD Sharp RZ-X660 (serv.man3) Service Manual ↓ Size: 25.3 MB | Pages: 108 in PDF or view online for FREE

7

• 

 The product uses a high visibility (300cd/m2 luminance) LED screen with a touch 
screen interface for input.

• 

 The display may be tilted for the best viewing angle. The angle can be adjusted within 
140 degrees left/right and 45 degrees up/down .

• 

 The product has no fan and is noiseless by design.

• 

 Transcend 64 GB SSD supports  Advance flash management (Global-wear-Leveling/
Bad Block management/TRIM /SMART) function and realizes a stable system 
configuration through the backup of OS, disk, partition, and file data, as well as 
providing a disaster restoration solution by using Total Recovery software.

•  

This product uses Microsoft POS Ready 7 (or similar operating system) which is 
designed for POS system and KIOSK applications.

• 

 This product has the wake-on function based on Magic Packet™ technology for 
remote booting and control through LAN.

• 

 The Resume (wake) on LAN function of RZ-X660 has the following limitations: 
If BIOS function [Resume on LAN] is set to "Enable" the system will wake from “Power 
Off” IF the normal Widows® shut down procedure is completed.
-  If RZ-X660 is turned off by unnatural means (other than the normal Widows® shut 

down procedure) the Resume on LAN will NOT “wake” the terminal.Examples of 
unnatural “Power Off” include:

- Press the power button to turn off 
- External power loss to the terminal (unplugged, blackout, etc.)

• 

 To enable the Resume on LAN function in the event of power loss set BIOS function 
Power Management setting [Restore on AC Power Loss]” to “Power On” state.

• 

 With this setting, if power is lost, the unit will turn on when power is restored and will 
re-enable the [Resume on LAN] function.

• 

 This product provides Several ports (USB, Serial, Parallel, LAN, and etc.) for facilitating 
the use of various POS peripheral devices.

•

  The application software will determine the usage and availability of the interfaces.

•

  If the terminal is turned off by Pressing and the power button and a power loss then occurs 
the terminal will NOT start automatically.

8

15 inch TFT-LCD screen with touch sensitive screen displays the operational status of 
the system and the system can be operated by touch screen.

1

Push the power button to turn terminal "ON" (AC connection required). 
Switch the terminal "OFF" by pushing shortly the power button which initiates 
shutdown of Windows.

2

LED lights up during solid state drive activity.

3

LED lights up when the system is "ON." 

4

For adjustment of the screens brightness. (increase / decrease)

5

For reading magnetic stripe cards.

6

2

1

4

3

5

6

9

Connects serial devices such as a customer display, a barcode scanner, or 
a receipt printer that uses a serial interface. 

2

•

 Default voltage at Pin 9 of COM 1, 4 is 5V. For further information, please contact your 
authorized SHARP dealer.

Connects the RJ-45 cable for 10/100/1000 Base Ethernet connection to this port.

4

To supply power to the system, please connect here the supplied AC/DC power 
adaptor (12V/7.0A).

1

Connects VGA signal cable from monitor (2nd monitor).

3

3 4

9

8

1

9

2

2

5

6

10

You can connect peripherals such as scanners, printers and keyboard to the USB 
(Universal Serial Bus) connectors. USB peripherals are hot swappable enabling plug 
and play for your peripherals.

5

An external amplified speaker may be connected to the jack for listening to sounds.

6

Can be used as 12V DC power for second monitor (optional LCD customer display 
model RZ-X6DP2).

7

8

Optional Sharp cash drawers can be connected to the cash drawer port.

9

Remove the cover to install or replace the SSD. Consult your authorized SHARP dealer 
for further details.