Sharp RZ-X660 (serv.man3) Service Manual ▷ View online
19
Caution:
•
Only use the RZ-X660 power adapter supplied by Sharp. Do not use any other power
adapter.
adapter.
•
The cable length of each connected device must be restricted to the maximum
length of 3m.
length of 3m.
Cable cover installation
Remove screws from the stand, attach the cable cover, and tighten screws that
came with the cable cover.
came with the cable cover.
20
Disassembly the plastic cover of MSR module.
1
Assembly the MSR (Magnetic Stripe Reader) (for EU only)
For models that MSR is not provided, must buy MSR and attach it.
For models that MSR is not provided, must buy MSR and attach it.
After tighten screw of the MSR module,
connect the MSR controller cable.
connect the MSR controller cable.
2
1
2
3
Assembly the plastic cover of the MSR module and tighten screws of the plastic cover.
3
1
2
INSTALLATION OF SHARP OPTIONAL
DEVICES
Assembly & disassembly the MSR
21
Disassembly the MSR (Magnetic Stripe Reader)
If MSR is not attached to the system, attach it according to MSR attachment contents.
If MSR is not attached to the system, attach it according to MSR attachment contents.
Make sure the system and peripherals are off.
1
Remove screws fixed the MSR plastic cover. Disassembly the MCR rear cover should
be opened toward the direction of arrow.
be opened toward the direction of arrow.
3
Disconnect cables for the peripherals and DC power input jack from the system.
2
1
2
Remove screws of the MSR module, disconnect the MSR cable and disassembly the
MSR module.
MSR module.
4
1
2
22
Assembly & disassembly the CDP
Disassembly the CDP (Customer Display) (optional)
The customer display serial cable disconnecting to COM4, after remove screws to the
customer display.
The customer display serial cable disconnecting to COM4, after remove screws to the
customer display.
Assembly the CDP (Customer Display) (optional)
After tighten screws of the customer display, the customer display serial cable is connected
to COM4.
After tighten screws of the customer display, the customer display serial cable is connected
to COM4.
Click on the first or last page to see other RZ-X660 (serv.man3) service manuals if exist.