Sharp XE-A303 (serv.man6) User Manual / Operation Manual ▷ View online
55
Part
3
FOR THE MANAGER
Part
2
Part
1
Programming for
%
and
&
The
%
key is used as an example below.
1. Specify the key to program.
2. Text programming (Press
s
to skip. / Press
A
to terminate.)
3. Rate programming (Press
s
to skip. / Press
A
to terminate.)
SIGN
02 (-)
02 (-)
s
(2) Press the
s
key to register the rate.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
ENTER RATE
02 15.00
02 15.00
15.00
(1) Enter the rate using numeric keys, using a decimal
point when setting fractional rates.
The rate can be set from 0.00 to 100.00.
Default setting is 0.
The rate can be set from 0.00 to 100.00.
Default setting is 0.
ENTER RATE
02 -0.00
02 -0.00
s
(3) Press the
s
key to register the text.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
% _
02 032
02 032
%
S S
(2) Enter the text.
A maximum of 12 characters can be entered.
Please refer to "Guidance for text programming" on
page 13 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
Use the
Please refer to "Guidance for text programming" on
page 13 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
Use the
S
and
B
keys to delete unnecessary
text data.
Pressing the
Pressing the
P
and
@
key moves the cursor to
the right and left respectively.
ENTER TEXT
02 0.00
02 0.00
=%=1
02 037
02 037
:
(1) Press
:
key to enter text programming.
On the upper line of the display, immediately after
displaying guidance message, the current text data
will be displayed.
On the lower line of the display, the character code
corresponding to the first character of the text data
will be displayed.
displaying guidance message, the current text data
will be displayed.
On the lower line of the display, the character code
corresponding to the first character of the text data
will be displayed.
%1 PROGRAMMING
02 0.00
02 0.00
ENTER[00]KEY
02 0.00
02 0.00
%
(1) Press the
%
key to enter
%
programming.
On the upper line of the display, immediately after
displaying "%1 PROGRAMMING", guidance
message for the next step will be displayed.
On the lower line of the display, the corresponding
function no. will be displayed.
displaying "%1 PROGRAMMING", guidance
message for the next step will be displayed.
On the lower line of the display, the corresponding
function no. will be displayed.
Operator display
Key operation
A303_3(En) 06.7.22 4:41 PM Page 55
56
4. Sign programming (Press
s
to skip. / Press
A
to terminate.)
5. Discount calculation (for the items) programming (Press
s
to skip. / Press
A
to terminate.)
6. Discount calculation (for the subtotals) programming (Press
s
to skip. / Press
A
to terminate.)
7. Percent rate limit programming (Press
s
to skip. / Press
A
to terminate.)
% HALO PROG.
02 90.00
02 90.00
90.00
(1) Enter percent rate limit using numeric key.
The rate limit can be set from 0.00 to 100.00.
Default setting is 100.00.
Default setting is 100.00.
% HALO PROG.
02 100.00
02 100.00
s
(2) Press the
s
key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the discount calculation for the
subtotals does not need to be changed from "SBTL
ENABLE". Otherwise, press
ENABLE". Otherwise, press
:
key to display
"SBTL DISABLE".
Each time
Each time
:
key is pressed, the display shows
"SBTL DISABLE" and "SBTL ENABLE" alternately.
Default setting is "ENABLE".
Default setting is "ENABLE".
ENTRY FOR SBTL
02 SBTL ENABLE
02 SBTL ENABLE
s
(2) Press the
s
key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the discount calculation for the items
does not need to be changed from "ITEM
ENABLE". Otherwise, press
ENABLE". Otherwise, press
:
key to display
"ITEM DISABLE".
Each time
Each time
:
key is pressed, the display shows
"ITEM DISABLE" and "ITEM ENABLE" alternately.
Default setting is "ENABLE".
Default setting is "ENABLE".
ENTRY FOR ITEM
02 ITEM ENABLE
02 ITEM ENABLE
s
(2) Press the
s
key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the sign does not need to be
changed from "(-)". Otherwise, press
:
key to
display "(+)".
Each time
Each time
:
key is pressed, the display shows
"(+)" and "(-)" alternately.
Choose "(-)" for discount and "(+)" for premium.
Default setting is "(-)".
Choose "(-)" for discount and "(+)" for premium.
Default setting is "(-)".
A303_3(En) 06.7.22 4:41 PM Page 56
57
Part
3
FOR THE MANAGER
Part
2
Part
1
8. Terminate programming
Item:
Selection:
Print:
A
Discount calculation
Enable*
0
(for the items)
Disable
1
B
Discount calculation
Enable*
0
(for the subtotals)
Disable
1
C
Always 0 is printed.
0
From left, ABC
Text
Percent rate
Percentage rate limit
Sign
Print
PGM
0.00
A
(1) Press the
A
key to terminate the
%
key
programming.
%2 PROGRAMMING
03 0.00
03 0.00
ENTER[00]KEY
03 0.00
03 0.00
s
(2) Press the
s
key to register the setting.
In the case of programming for the
%
key, "%2
PROGRAMMING" will be displayed on the upper
line, and the corresponding function no. on the
lower line. Go to step 2 to program the
line, and the corresponding function no. on the
lower line. Go to step 2 to program the
&
key.
In the case of programming for the
&
key, the
display shows "ENTER[TL/NS]KEY". Go to step 8.
A303_3(En) 06.7.22 4:41 PM Page 57
58
Programming for
V
1. Specify the key to program.
2. Text programming (Press
s
to skip. / Press
A
to terminate.)
3. Rate programming (Press
s
to skip. / Press
A
to terminate.)
OPEN RATE ENTRY
37 OPEN ENABLE
37 OPEN ENABLE
s
(2) Press the
s
key to register the rate.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
ENTER EX RATE
37 0.939938
37 0.939938
0.939938
(1) Enter the rate using numeric keys, using a decimal
point when setting fractional rates.
The rate can be set from 0.000000 to 999.999999.
Default setting is 0.000000.
The rate can be set from 0.000000 to 999.999999.
Default setting is 0.000000.
ENTER EX RATE
37 0.000000
37 0.000000
s
(3) Press the
s
key to register the text.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
EX _
37 032
37 032
EX
S S S
(2) Enter the text.
A maximum of 12 characters can be entered.
Please refer to "Guidance for text programming" on
page 13 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
Use the
Please refer to "Guidance for text programming" on
page 13 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
Use the
S
and
B
keys to delete unnecessary
text data.
Pressing the
Pressing the
P
and
@
key moves the cursor to
the right and left respectively.
ENTER TEXT
37 0.00
37 0.00
EXCH1
37 069
37 069
:
(1) Press
:
key to enter text programming.
On the upper line of the display, immediately after
displaying guidance message, the current text data
will be displayed.
On the lower line of the display, the character code
corresponding to the first character of the text data
will be displayed.
displaying guidance message, the current text data
will be displayed.
On the lower line of the display, the character code
corresponding to the first character of the text data
will be displayed.
EXCHANGE PROG.
37 0.00
37 0.00
ENTER[00]KEY
37 0.00
37 0.00
V
(1) Press the
V
key to enter
V
programming.
On the upper line of the display, immediately after
displaying "EXCHANGE PROG.", guidance message
for the next step will be displayed.
On the lower line of the display, the corresponding
function no. will be displayed.
displaying "EXCHANGE PROG.", guidance message
for the next step will be displayed.
On the lower line of the display, the corresponding
function no. will be displayed.
Operator display
Key operation
A303_3(En) 06.7.22 4:41 PM Page 58
Click on the first or last page to see other XE-A303 (serv.man6) service manuals if exist.