DOWNLOAD Sharp XE-A207 (serv.man6) Service Manual ↓ Size: 25.74 MB | Pages: 127 in PDF or view online for FREE

97

■

You can program whether or not to skip “0” in each report.

Program each item as follows:
• DEPARTMENT (Use the selective entry)

SKIP: 

Skips those data that are “0” in the department 
report.

NOT SKIP:  Does not skip those data that are “0” in the 

department report.

SKIP: 

Skips those data that are “0” in the transaction 
report.

NOT SKIP:  Does not skip those data that are “0” in the 

transaction report.

SKIP: 

Skips those data that are “0” in the PLU report.

NOT SKIP:  Does not skip those data that are “0” in the PLU report.

SKIP: 

Skips those data that are “0” in the clerk report.

NOT SKIP:  Does not skip those data that are “0” in the clerk report.

SKIP: 

Skips those data that are “0” in the hourly report.

NOT SKIP:  Does not skip those data that are “0” in the hourly report.

■

You can program whether or not to print the item on the report.

Program each item as follows:

The screen continues.

YES: Print the separate line on the report.
NO:  Not to print the separate line on the report.

YES: Print the Z counter on the Z report.
NO:  Not to print the Z counter on the Z report.

YES: Print GT1 on the Z report.
NO:  Not to print GT1 on the Z report.

YES: Print GT2 on the Z report.
NO:  Not to print GT2 on the Z report.

YES: Print GT3 on the Z report.
NO:  Not to print GT3 on the Z report.

YES: Print the balance GT on the Z report.
NO:  Not to print the balance GT on the Z report.

YES: Print the training GT on the Z report.
NO:  Not to print the training GT on the Z report.

98

YES: Print GT1 on the X report.
NO:  Not to print GT1 on the X report.

YES: Print GT2 on the X report.
NO:  Not to print GT2 on the X report.

YES: Print GT3 on the X report.
NO:  Not to print GT3 on the X report.

YES: Print the training GT on the X report.
NO:  Not to print the training GT on the X report.

YES: Print total of VOID MODE on X1Z1 report
NO:  Not to print total of VOID MODE on X1Z1 report

YES:  Print total of VOID MODE on X2Z2 report
NO:  Not to print total of VOID MODE on X2Z2 report

YES: Print PLU data on the PLU Z report.
NO:  Not to print PLU data on the PLU Z report.

YES: Print EJ data on the EJ Z report.
NO:  Not to print EJ data on the EJ Z report.

SMALL:  Print EJ in a small size.
NORMAL: Print EJ in a normal size.

■

Program each item as follows:
• GENERAL Z1: Max.4 digits (0000 to 9999)
• GENERAL Z2: Max.4 digits (0000 to 9999)

99

■

Program each item as follows:
• SD: SAVE SALES (Use the selective entry)

YES:  Save the sales data in the SD card.
NO:   Not to save the sales data in the SD card.

YES:  Save the electronic journal data in the SD card.
NO:   Not to save the electronic journal data in the SD card.

YES:  Save all the RAM data in the SD card.
NO:   Not to save all the RAM data in the SD card.

YES:  Clear the electronic journal data
NO:  Not to clear the electronic journal data

YES:  Reset the balance GT.
NO:   Not to reset the balance GT.

YES:  Reset the GT.
NO:   Not to reset the GT.

■

You can program the memory type and the starting time for the hourly report.

Program each item as follows:
• MEMORY TYPE (Use the selective entry)

30MIN:  Selects the 30-minute type.
60MIN:  Selects the 60-minute type.

Starting time entry (max. 2 digits: 0 to 23)

■

Program each item as follows:
• STORE TO SD (Use the selective entry)

When the EJ data is recorded on the SD card:
AS IS: 

Control characters are recorded as they are

W SPACE: Control characters are recorded as double space.

YES:  Record the EJ data in the training mode.
NO:   Not to record the EJ data in the training mode.

When the X report data in the EJ is recorded:
HEADER: Record only the header of X report in the electronic journal.
DETAIL:  Record the detail of X report in the electronic journal.

100

Use the following procedure to select any option included in the message group:

  In the SETTING window, select “10 MESSAGE.”

• The MESSAGE window will appear.

 Select any option from the following options list:

 

1

  RECEIPT LOGO 

Receipt logo

 

The following illustration shows those options included in this programming group.

10 MESSAGE

1  RECEIPT LOGO

l

See “Receipt logo” this page.

■

Your register can print programmed messages for customers on every receipt.
The logo text is printed in a centering form on the receipt.

Program each item as follows:
• RECEIPT LOGO (Use the character entry)

Logo text for the receipt (max. 30 characters x 6 lines)