DOWNLOAD Sharp XE-A203 (serv.man5) Service Manual ↓ Size: 3.94 MB | Pages: 34 in PDF or view online for FREE

XE-A203V/A213V

SPECIFICATIONS

– 3 –

Display device

: LCD

Number of line

: 1 line

Number of positions : 16 positions

Color of backlight 

: Yellow / Green

Character form

: 5 x 7 dots

Character size

: 13mm (H) x 99mm (W)

Display device

: LED

Number of line

: 1 line

Number of positions : 7 positions

Color of display

: Yellow / Green

Style

: Pop up type

Character form

: 7 segment + Dp

Character size

: 14.2mm (H) x 7.9mm (W)

The mode you are in is displayed. When a clerk is assigned, the
clerk code is displayed in the REG or OP X/Z mode. For example,
"*01*" is displayed when clerk 01 is assigned.

The number of repeats is displayed, starting at "2" and incremental
with each repeat. When you have registered ten times, the display
will show "0". (2

33 ......9303132...)

When the cash register goes into the power save mode, the power
save mark (decimal point) lights up.

Item labels of departments and PLU/subdepartments and function
texts you use, such as %, (–) and CASH are displayed. 
When an amount is to be entered or entered, "AMOUNT" is dis-
played: When an amount is to be entered, ------- is displayed at the
numeric entry area with "AMOUNT". When a preset price has been
set, the price is displayed at the numeric entry area with "AMOUNT".

Numbers entered using numeric keys are displayed here.

Date and time appear on the display in the OP X/Z, REG, or MGR
mode. In the REG or MGR mode, press the [#] key to display the date
and time.

When an error occurs, the corresponding error message is displayed
in the function message display area. 

■

:

Appears during programming.

Appears when an error is detected.

Appears when the subtotal is displayed or when the amount ten-
dered is smaller than the sales amount.

Appears when the [EX] key is pressed to calculate a subtotal in
foreign currency.

Appears when a transaction is finalized by pressing the [TL/NS],
[CH1], [CH2], [CR1] or [CR2] key.

Appears when the change due amount is displayed.

: Appears in the far-left three positions at the timing of key entry

when the electronic journal (EJ) memory is full. (Depending on
programming.)

Appears when the voltage of the installed batteries is under the
required level. You must replace with new ones within two days.

Appears when the batteries are not installed, or the installed
batteries are dead. You must replace with new ones immedi-
ately.

:

May appear right below the eighth and ninth places at the timing
of finalization of a transaction when the electronic journal (EJ)
memory is nearly full.
Also appears right below the tenth place when power save mode
is effective.

: Appears when programmed date (and time) for EURO modifica-

tion operation is come.

:

Appears when the print roller arm is not locked.

: Appears when the paper is not set or out.

Power save mark display area
Function message display area

Numeric entry display area

Repeat number display area

XE-A203V/A213V

SPECIFICATIONS

– 4 –

 • Part number

: M-T53II

 • NO. of station

: 1 (Receipt or journal)

 • Validation

: No.

 • Printing system

: Line thermal

 • No. of dot

: 288 dots

 • Dot pitch

: Horizontal 0.167mm

Vertical

0.174mm

 • Font

: 10 dots (W) u  24 dots (H)

 • Printing capacity : max. 24 characters

 • Character size

: 1.67mm (W) u  4.17mm (H) at 10 u  24 dots

 • Print pitch

: Column distance

2.0mm

Row distance

5.21mm

 • Print speed

: Approximate 60mm/s (Approximate 12 l/s)

 • Paper feed speed : Approximate 60mm/s (Approximate 12 l/s)

(Manual feed)

: Approximate 40mm/s (Approximate 12 l/s)

 • Reliability

: Mechanism LIFE 6 million lines used to high-

quality thermal paper

 • Paper end sensor : Set up

 • Cutter

: No

 • Near end sensor : No

• No

Number of thermal head heater elements 288 dots

•  Standard equipment: Yes (1)

•  Max. number of additional drawers: 1

•  The drawer consists of:

1) Drawer box (outer case) and drawer

2) Money case

3) Coin case

4) Lock (attached to the drawer)

•  Location of the lock:Front

•  Method of locking and unlocking:

To lock, insert the drawer lock key into the lock
and turn it 90 degrees counter clockwise.
To unlock, insert the drawer lock key and turn it
90 degrees clockwise.

• Key No:

SK1-1

• Paper rolldimension:  57.5 m  0.5mm in width

Max. 80mm

in diameter

•  Paper quality:

High-quality thermal paper

paper thickness: 0.06 to 0.08mm

Nihon seisi thermal paper : TF50KS-E

Oji thermal paper

: PD150R, PD160R

0.167

(4.75)

(4.75)

48 (288 dots)

print area

(max.24 characters)

(units : mm)

57.5±0.5

(Paper dimension)

Model name of the drawer box

SJ-420

Size

355 (W) x 424 (D) x 125 (H) mm

Material

Metal

Bell

–

Release lever

Standard equipment: 
Situated at the bottom

Drawer open sensor

–

Separation from the drawer

Disallowed

Separation of the bill compartments from the coin
compartments

Allowed

Bill separator

–

Number of compartments

5B/8C

5B/8C

SK1-1

XE-A203V/A213V

SPECIFICATIONS

– 5 –

For memory back up, three alkaline batteries LR6 ("AA"size) are needed.
For memory back up, the dry battery AA (3 pieces) are needed.

1. Memory Holding time :

Approximate 1 year after New dry batteries are inserted.

2. Battery exchange method:

When the indication “LOW BATTERY”  appear on the LCD, batteries
must be exhanged by the following mannor within 2 days.

1) Power on the ECR.

2) Turn Mode switch to “REG” mode .

3) Release the Old dry batteries (3 pieses).

4) Insert the New dry batteries (3 pieses).

5) Confirm the indication “LOW BATTERY” disappear.

Low battery indication will appear in upper line of display when the bat-
tery voltage is low.

When any numeric entry & any item entry is not done or just
after finalization.

The machine can indicate the low battery condition. (Always)

When numeric entry or item entry is done.

Battery condition will not appear.
Exceptionally, when the power is restored after a power failure, the
low battery condition will appear on the display only when the bat-
tery is low.
And the indicator will disappear after any key entry.

Note: “NO BATTERY”: When the “NO BATTERY” is display, the master

reset is executed at the timing of “POWER ON”
after the “POWER OFF”.

OPERATER

1234567890123456

NOTE

Low battery.
You have to change the batteries.

LOW BATTERY 

No battery.
You have to change the batteries
immediately.

NO BATTERY  

XE-A203V/A213V

OPTIONS

– 6 –

Master resetting clears the entire memory and resumes initial values.

Master resetting can be accomplished by using the following procedure:

Procedure A:

1) Unplug the AC cord from the wall outlet  or set the

mode switch to OFF Position. 

2) Let the ECR be without the memory back up battery.

3) Wait over 1 muinite for discharging.

4) Set the mode switch to any position except OFF. 

5) Plugin the AC cord to the wall outlet  or turn the

mode switch from OFF Position to another position.

6) Insert batteries before carrying out operation after

master resetting.

The master reset can also be accomplished in the following case.

In case power failure occurs when the machine has no battery
attached to it, the master reset operation is automatically performed
after the power has been restored.

(This is because if power failure occurs with no battery attached to
the machine, all the memories are lost and the machine does not
work properly after power recovery; this requires the master reset
operation.)

This resetting resumes the initial program without clearing memory.

This resetting can be operated at below sequence in PGM mode. 

Procedure:

1) Unplug the AC cord from the wall outlet. 

2) Wait over 1 muinite for discharging. 

3) Set the mode switch to the PGM position. 

4) While holding down the FEED key, plugin the AC

cord to the wall outlet. 

Note: In case power failure occurs when the machine has no battery

attached to it, the master reset operation is automatically per-
formed after the power has been restored.

NO

NAME

PARTS CODE

PRICE 

RANK

DESCRIPTION

1

Thermal roll paper

TPAPR6645RC05

AY

5roll/pack 80

φ

NO

NAME

PARTS CODE

PRICE 

RANK

DESCRIPTION

1

USB Cable