Sharp UP-800 (serv.man26) Service Manual ▷ View online
UP-800F/810F (V)
SRV MODE PROGRAMMING (“SETTING”)
3 – 11
915-D: 1. Single/Double receipts are issued by the number of a multi-
plier
[JOB#916] : MRS=1000
916-A: 1. Printing of Link PLU, EAN on S/D receipt on KP
2. Action to be taken when text and amount overlaps each other
in a REG-mode entry
916-B: 1. Finalization by charge (credit) when ST t 0
2. Tendering which is smaller than the sales amount
916-C: 1. Negative merchandise subtotal
2. Subtotal entry before tender
3. Subtotal entry before direct non-tendering finalization
3. Subtotal entry before direct non-tendering finalization
916-D: 1. Coupon PLU printing on X/Z report
2. Net sales subtotal (NET1) printing on X/Z report
3. Check change total printing on X/Z report
[JOB#917] NOT USED : MRS=0000
[JOB#918] : MRS=0010
918-A: 1. Printing of text for associated PLU in COMBO MEAL
(Set PLU/EAN).
2. Direct non-tendering finalization after previous tender en-try.
3. COMBO MEAL (Set PLU/EAN) printing on KP.
3. COMBO MEAL (Set PLU/EAN) printing on KP.
1. S/D receipts are issued by the number of a
multiplier
915-D
Default
No
0
★
Yes
4
1. Printing of Link
PLU, EAN on S/D
receipt on KP
receipt on KP
2. Action to be taken
when text and
amount overlaps
each other in a
REG-mode entry
amount overlaps
each other in a
REG-mode entry
916-A
Default
Each PLU
Eat in
0
2 line print
1
★
Total
Eat in
2
2 line print
3
1. Finalization by
charge (credit)
when ST t 0
when ST t 0
2. Tendering which is
smaller than the
sales amount
sales amount
916-B
Default
Inhibit
Disable
0
★
Enable
2
Always
Disable
4
Enable
6
1. Negative
merchan-
dise
subtotal
dise
subtotal
2. Subtotal
entry before
tender
tender
3. Subtotal entry
before direct
non-tendering
finalization
non-tendering
finalization
916-C
Default
Enable
Non-
compulsory
Non-
compulsory
0
★
Compulsory
1
Compulsory
Non-
compulsory
2
Compulsory
3
Disable
Non-
compulsory
Non-
compulsory
4
Compulsory
5
Compulsory
Non-
compulsory
6
Compulsory
7
1. Coupon
PLU print-
ing on X/Z
report
ing on X/Z
report
2. Net sales
subto-
tal(NET1)
printing on
X/Z report
tal(NET1)
printing on
X/Z report
3. Check change
total printing on
X/Z report
X/Z report
916-D
Default
Print
Print
Print
0
★
Skip
1
Skip
Print
2
Skip
3
Skip
Print
Print
4
Skip
5
Skip
Print
6
Skip
7
1. Printing of
text for asso-
ciated PLU
in COMBO
MEAL
(Set PLU/
EAN).
ciated PLU
in COMBO
MEAL
(Set PLU/
EAN).
2. Direct non-
tendering
finalization
after previ-
ous tender
en-try.
finalization
after previ-
ous tender
en-try.
3. COMBO
MEAL
(Set PLU/
EAN) print-
ing on KP
(Set PLU/
EAN) print-
ing on KP
918-A
Default
Print
Disable
According
to each
PLU/EAN
0
★
According
to MENU
PLU/EAN
1
Enable
According
to each
PLU/EAN
2
According
to MENU
PLU/EAN
3
No
Disable
According
to each
PLU/EAN
4
According
to MENU
PLU/EAN
5
Enable
According
to each
PLU/EAN
6
According
to MENU
PLU/EAN
7
UP-800F/810F (V)
SRV MODE PROGRAMMING (“SETTING”)
3 – 12
918-B: 1. Red color printing on KP when PLU’s unit price is zero
918-C: 1. Printing of Z1/Z2 counter in Z reports
2. Cumulating orders on KP
3. Printing the DEPT/PLU text on KP in double size character
918-D: 1. Tip paid includes cash tip
2. Clearing of tip totalizer at clerk Z1 report
3. Printing of tip totalizer on the clerk report
[JOB#919] : MRS=4100
919-A: Not used (Fixed at "4")
919-B: 1. Checking of clerk# on guest check when a reorder is made
2. Entry of the number of guests
3. Guest check number
3. Guest check number
919-C: 1. Change of entry amount by with / without
2. GLU entry
3. Amount printing when PLU unit price is zero
919-D: 1. Conversion ST printing of native ST
[JOB#920] : MRS=0040 : INLINE
PROGRAMMING AREA
920-A: 1. Non add entry printing.
1. Red color printing on KP when PLU’s unit
price is zero
918-B
Default
No
0
★
Yes
2
1. Printing of
Z1/Z2
counter in
Z reports
counter in
Z reports
2.Cumulat-
ing orders
on KP
on KP
3. Printing the
DEPT/PLU
text on KP in
double size
character
text on KP in
double size
character
918-C
Default
Yes
No (Recapitu-
lation)
No
0
Yes
1
★
Yes
(Non Reca-
pitulation)
No
2
Yes
3
No
No (Recapitu-
lation)
No
4
Yes
5
Yes
(Non Reca-
pitulation)
No
6
Yes
7
1. Tip paid
includes cash
tip
tip
2. Clearing of
tip totalizer
at clerk Z1
report
at clerk Z1
report
3. Printing of tip
totalizer on
the clerk
report
the clerk
report
918-D
Default
Yes
No
No
0
★
Yes
1
Yes
No
2
Yes
3
No
No
No
4
Yes
5
Yes
No
6
Yes
7
1. Checking of
clerk# on
guest check
when a reor-
der is made
guest check
when a reor-
der is made
2. Entry of the
number of
guests
guests
3. Guest check
number
919-B
Default
Yes
Inhibit
Auto
generation
0
Manual
1
★
Compulsory
Auto
generation
2
Manual
3
No
Inhibit
Auto
generation
4
Manual
5
Compulsory
Auto
generation
6
Manual
7
1. Change of
entry amount
by with /
without
by with /
without
2. GLU entry
3. Amount
printing
when PLU
unit price is
zero
when PLU
unit price is
zero
919-C
Default
Yes
Non-
compulsory
No
0
★
Yes
1
Compulsory
No
2
Yes
3
No
Non-
compulsory
No
4
Yes
5
Compulsory
No
6
Yes
7
1. Conversion ST printing of native ST
919-D
Default
Yes
0
★
No
4
1. Non add entry printing.
920-A
Default
Only last one before item entry
0
★
All
UP-800F/810F (V)
SRV MODE PROGRAMMING (“SETTING”)
3 – 13
920-B: 1. System report and down-load job is executed in the back-up
master.
2. The GLU finalization is executed in the satellite.
3. The clerk system
920-C: 1. Automatic download machines in an inline system at EAN
programming and EAN delete.
2. PGM-mode programming at the satellite
920-D: 1. The register is
[JOB#921] : MRS=0010
921-A: Not used (Fixed at “0”)
921-B: 1. GLU system
921-C: 1. VAT shift operation timing.
2. BILL printing method: The action after printing Bill.
921-D: Not used (Fixed at "0")
[JOB#922]: MRS=4000
922-A: 1. Bill title is printed on bill
2. Past void can be done
922-B: 1. Void totalizer update
2. Print of the copy of bill contents on journal
922-C, D: Not used (Fixed at “00”)
1. System
report and
down-load
job is exe-
cuted in the
back-up
master.
down-load
job is exe-
cuted in the
back-up
master.
2. The GLU
finalization
is exe-
cuted in the
satellite.
is exe-
cuted in the
satellite.
3.The clerk
system
920-B
Default
Disable
Enable
Centralized
0
★
Individual
1
Disable
Centralized
2
Individual
3
Enable
Enable
Centralized
4
Individual
5
Disable
Centralized
6
Individual
7
1. Automatic down-
load machines in
an inline system at
EAN programming
and EAN delete.
an inline system at
EAN programming
and EAN delete.
2. PGM-mode pro-
gramming at the
satellite
satellite
920-C
Default
Yes
Disable
0
Enable
1
No
Disable
4
★
Enable
5
1. Non add entry printing.
920-D
Default
Standard alone machine
0
★
Satellite
1
Master
2
Back up master
3
1. GLU system
921-B
Default
Centralized
0
★
Individual
4
1. VAT shift
operation timing.
2. BILL printing
method:
The action after
printing Bill.
The action after
printing Bill.
921-C
Default
Only at the start of
transaction
The item data is deleted
and each bill continue
to print in the previous
bill.
and each bill continue
to print in the previous
bill.
0
T h e i te m d a t a i s n o t
deleted and each bill
prints all item.
deleted and each bill
prints all item.
1
★
Only at the end of
transaction
The item data is deleted
and each bill continue
to print in the previous
bill.
and each bill continue
to print in the previous
bill.
2
T h e i te m d a t a i s n o t
deleted and each bill
prints all item.
deleted and each bill
prints all item.
3
1. Bill title is printed
on bill
2. Past void can be
done
922-A
Default
Not printed
In REG/MGR mode
0
1
In MGR mode
2
3
Printed
In REG/MGR mode
4
★
5
In MGR mode
6
7
1. Void totalizer
update
2.Print of the copy of
bill contents on
journal
journal
922-B
Default
The void for items
which are printed on
the receipt printer or
the receipt printer or
kitchen printer are only
reported in the void
totalizer
No
0
★
Yes
2
The all void of items are
reported in the void
totalizer
No
4
Yes
6
UP-800F/810F (V)
SRV MODE PROGRAMMING (“SETTING”)
3 – 14
[JOB#923] : MRS=0010 : INLINE
PROGRAMMING AREA
923-A, B: 1. The recordnumber for REQUEST of T-LOG POLLING
(x100)
Explanation for satellite:
Ex:
When AB=10 The satellite willrequest to the master to poll the T-log
when the T-log records exceed 1, 000.
923-C: 1. Electronic Journal Resetting
2. Bill number Print
3. T-log function
923-D: 1. Polling cycle (second)
[JOB#924] : MRS=0000 : INLINE
PROGRAMMING AREA
924-A: 1. Report printing when consolidation daily and periodic cash-
ier/clerk reading or resetting is taken.
924-B: 1. Save file except for PLU/EAN.
Programming whether or not to lock REG-mode entries after
individual daily total resetting
individual daily total resetting
* This programming is effective, when JOB#925-B is set to “Various
individual resetting = Enable”.
924-C, D: Not used (Fixed at “00”)
[JOB#925] : MRS=0100 : INLINE
PROGRAMMING AREA
925-A: 1. Selection of the method of daily total general consolidation
resetting at the master.
Method-1 : Those data that has individually been reset and
the current sales data are reset to-gether.
Method-2 : Only those data that has individually been reset is
reset.
2. Clearing of the individual resetting memory at the time of
consolidation daily total general resetting.
3. Execution of RESET CLEAR when consolidation daily total
general resetting has not been taken.
925-B: 1. Any entry operation is inhibited until RESET CLEAR is exe-
cuted after consolidation daily total transaction reset-ting has
been taken.
been taken.
2. Various individual resetting.
*This programming is effective, when JOB#924-B is set to “Save file
except for PLU" = Exist”.
925-C: 1. Report printing when consolidation daily and periodic total
transaction reading or resetting is taken
1. The recordnumber for REQUEST of T-LOG
POLLING (x100)
923-AB
Default
0000 ~ 9900
00-99
00
1. Electronic
Journal
Resetting
Resetting
2. Bill number
Print
3. T-log func-
tion
923-C
Default
Enable
Yes
No
0
Yes
1
★
No
No
2
Yes
3
Disable
Yes
No
4
Yes
5
No
No
6
Yes
7
1. Polling cycle (second)
923-D
Default
0 ~ 9 Sec.
0-9
0
1. Report printing when consolidation daily and
periodic cashier/clerk reading or resetting is
taken.
taken.
924-A
Default
Printing of report on individual register
0
★
Printin g of bo th (i.e. repor ts on individual
machines and consolidation report on the entire
system)
machines and consolidation report on the entire
system)
4
1. Save file except for PLU.
*
924-B
Default
Not
0
★
Exist
4
1. Selection of
the method
of daily total
general con-
solida-tion
resetting at
the master.
of daily total
general con-
solida-tion
resetting at
the master.
2. Clearing of
the individ-
ual reset-
ting memory
at the time
of consolida-
tion daily
total gen-
eral reset-
ting.
ual reset-
ting memory
at the time
of consolida-
tion daily
total gen-
eral reset-
ting.
3. Execution of
RESET
CLEAR
when con-
solidation
daily total
general
resetting has
not been
taken.
CLEAR
when con-
solidation
daily total
general
resetting has
not been
taken.
925-A
Default
Method-1
Yes
Disable
0
★
Enable
1
No
Disable
2
Enable
3
Method-2
Yes
Disable
4
Enable
5
No
Disable
6
Enable
7
1. Any entry operation
is inhibited until
RESET CLEAR is
executed after con-
solidation daily total
transaction reset-ting
has been taken.
RESET CLEAR is
executed after con-
solidation daily total
transaction reset-ting
has been taken.
2. Various individual
resetting
925-B
Default
Yes
Disable
0
Enable
1
★
No
Disable
2
Enable
3
1. Report printing when consolidation daily and
periodic total transaction reading or resetting
is taken
is taken
925-C
Default
P r i n t i n g o f b o t h i . e . r e p o r t s o n i n d i v i d u a l
machines and consolidation report on the entire
system
machines and consolidation report on the entire
system
0
★
Printing of consolidation report on the entire sys-
tem
tem
1
Printing of report on individual register
2
Click on the first or last page to see other UP-800 (serv.man26) service manuals if exist.