Sharp UP-800 (serv.man22) Service Manual ▷ View online
- 5 -
5. Item transfer to another table at bill separation
At bill separation it is possible to transfer only one item or several items to another table.
At bill separation it is possible to transfer only one item or several items to another table.
Selection of one item or several items is done by touch in the REG window.
After selection the GLU number to which the transfer should be done is entered.
New key sequence at Bill separation
1. After BS-key operation pop-up window opens for targeted GLU# entry
2. Entry of targeted GLU#
- 6 -
3. Display of target GLU#
4.
Selected item / items for target GLU# Selected item / items can be moved back
to the original GLU#
5.
Finalized by NBAL or payment operation
6.
Next targeted GLU# entry by GLU code
◊ GLU key operation after [<-] key
operation
7.
If no items remain on the original GLU# only BS-key is shown in the display
information area to leave B.S. function
- 7 -
6. Subtotal amount print position after redeem entry
The print position of the current subtotal amount after redeem entry has been changed in order to
have the
correct subtotal amount printed on receipt.
7. 1 line item print bill format on TM-T88(III) / (IV)
As on the UP-810F internal printer a 1 line item print bill format is provided for the EPSON printer
As on the UP-810F internal printer a 1 line item print bill format is provided for the EPSON printer
TM-T88 (III / IV) in case of Department / PLU print.
Example
Note:
The behavior if amount and text overlaps depends on the setting of:
SRV#916-A: Eat-In / 2 line print”
8. VAT ID number entry field at Name / Address entry and print
By using the Name / Address entry key an additional field is opened which allow to enter a VAT ID
By using the Name / Address entry key an additional field is opened which allow to enter a VAT ID
number.
The length of this field is 16 digits / characters.
By operating the “NAME & ADDRESS” key the REG window shows:
1. NAME & ADD SEARCH
Æ after “ENTER” key operation (as currently done)
2. ----- ENTRY -----
Æ after “ENTER” key operation (as currently done)
3. NAME entry field
Æ after entering the name and “ENTER” key operation screen jumps
to the
ADDRESS entry window (as currently done)
- 8 -
4. ADDRESS entry field
Æ after entering the address and “ENTER” key operation screen
jumps to the
VAT ID entry window
5. VAT ID NUMBER entry field
After entering the VAT ID number and “ENTER” key operation the Name / Address / VAT ID entry is
finalized.
It is possible to leave the Name / Address / VAT ID fields by “CANCEL” key operation.
8. Scale timer
A timer setting is introduced in PGM2 mode under “Terminal” setting which decides when the scale
A timer setting is introduced in PGM2 mode under “Terminal” setting which decides when the scale
display should be cleared in order to go back to the initial state after a “None scale item” entry.
Click on the first or last page to see other UP-800 (serv.man22) service manuals if exist.