Sharp UP-600 / UP-700 (serv.man6) Handy Guide ▷ View online
E
E
C
C
R
R
/
/
E
E
P
P
O
O
S
S
T
T
r
r
a
a
i
i
n
n
i
i
n
n
g
g
Simplified operation of Tables
(No need for NC key)
Bill Separate/Bill Transfer on screen
(As ERA770)
Infinite number of fully itemised customer Bill
(By use of Intermediate bill Auto Key arrangement)
Shared Printing (RS232)
(Bill/Slip or KP)
PLU Menus
(25 Menus 15 items per Menu)
Condiment Menus
15 Condiment Tables 15 items per Table)
15 Condiment Tables 15 items per Table)
Combo EAN/PLU
10 Combo’s 10 items per Combo
Shift Sort Receipt
(Sorted Groups can be shifted therefore Starter as Mains)
Floating Servers
(As 750/770/3300 not just Overlap)
Mixed Cashier/Clerk system
(A combination of Cashier/Clerk system can be in operation on the same machine)
16 Characters for Dept/PLU/EAN
(Choice of 12 or 16 Characters by file)
Clerk in use indicator
(On a network system, the operator will be warned that a specific clerk is in overlap
on a specific machine)
(On a network system, the operator will be warned that a specific clerk is in overlap
on a specific machine)
E
E
C
C
R
R
/
/
E
E
P
P
O
O
S
S
T
T
r
r
a
a
i
i
n
n
i
i
n
n
g
g
Customer sign by Magnetic Card
(Customer Accounts maximum 1000 Detailed/8000 Total)
(As well as sign on by numeric Entry or scan item there is now the ability to sign on
by magnetic card)
(As well as sign on by numeric Entry or scan item there is now the ability to sign on
by magnetic card)
Clerk by Department Report
Clerk by PLU Report
(Set flag in PLU programming to record in Clerk Report)
(Set flag in PLU programming to record in Clerk Report)
Minimum Stock Alert
(By setting line 906-A, the operator can be warned that the stock level has reached
the minimum setting)
the minimum setting)
Mix and Match (Promotion) UK Specification
E
E
C
C
R
R
/
/
E
E
P
P
O
O
S
S
T
T
r
r
a
a
i
i
n
n
i
i
n
n
g
g
5. General Communications
Two standard RS232 Ports
Optional 2 Ports with ERA5RS
Optional Network Card UP-E01IN
Network Specification.
The type of network used on the UP600/700 is a LAN.
(Local Area Network)
(Local Area Network)
Transmission system
10Base-T
(10 Meg bits/sec on UTP structured cable)
Transmission Distance
Segment length max 100M
Cable Type
UTP (Unshielded Twisted Pair)
Number of connectable machines
15 for Real Time Communications
32 for general LAN specification
32 for general LAN specification
Hardware Requirements for network system.
1. Each machine must be fitted with an UP-E10IN Interface board.
2. Memory Board UP-S02MB or UP-S04MB must be fitted to the master, and
depending on the system configuration may be required in the Slave terminals.
3. A Hub will be required for a system of 3 machines or more (L80UPHUB800)
4. Cable Standard Cat-5 (Straight Through) for Hub
5. Cross over cable for machine to machine
Program Setup
The programming of the Network is almost the same as on previous models.
The only difference is setting the Terminal number and master list.
Instead of referring to the Terminal number we will refer to them as the IP Address
The first three addresses should be set as the default setting.
E
E
C
C
R
R
/
/
E
E
P
P
O
O
S
S
T
T
r
r
a
a
i
i
n
n
i
i
n
n
g
g
T-Log Polling
This is a brief description of the T-Log polling feature on the UP600/700 as part of
the Training guide.
the Training guide.
The T Log polling system works by the Slave machine informing the Master that he
has data that must now be sent to the master terminal for file update.
has data that must now be sent to the master terminal for file update.
Caution. Do not create T log Buffer file in the master machine, if it is not connected
to a PC (or if PC software is not polling for T Log data, check with supplier)
(If no PC connected make sure file 146 does not exist in Master machine)
to a PC (or if PC software is not polling for T Log data, check with supplier)
(If no PC connected make sure file 146 does not exist in Master machine)
T log polling starts when the Open Store command is carried out and it will stop T
log polling when the store is closed.
log polling when the store is closed.
The slave machines have a setting for the number of records that they can store
before they send a request to the master to come and get their data.
This is set at job 923-AB. (e.g. if job code 923-AB is set to 01 the slave will inform
the Master every 100 items that it requires to be polled)
before they send a request to the master to come and get their data.
This is set at job 923-AB. (e.g. if job code 923-AB is set to 01 the slave will inform
the Master every 100 items that it requires to be polled)
Once the Master has got the slaves data and consolidated it he then waits the length
of the Polling Cycle before he goes to the next slave that has requested polling.
of the Polling Cycle before he goes to the next slave that has requested polling.
The features that require T-Log polling are: -
Sales data of the EAN/PLU
The learning feature will require the T-Logging if there is no D EAN file created.
Price change will also require the use of T logging, as the changed price will be sent
to all terminals in the system after open store.
to all terminals in the system after open store.
The customer data is also centrally controlled in the master so data entered at the
Click on the first or last page to see other UP-600 / UP-700 (serv.man6) service manuals if exist.