DOWNLOAD Sharp UP-600 / UP-700 (serv.man27) Service Manual ↓ Size: 2.7 MB | Pages: 127 in PDF or view online for FREE

This is printed 
immediately
after entering
the PLU of
group 00 or
department.

They are printed
when the 
transaction is 
finalized.

This is printed
when you press
the  

r

 or 

˝

 key 

after the transaction.
(After transaction
receipt)

Double receipt

Single receipt

■

If the receipt and journal paper rolls are not set in the machine or there are low rolls, install new ones
according to section “Installing and Removing the Paper Rolls” under “Operator Maintenance.”

■

You can disable receipt printing in the REG mode to save paper using the receipt function. To disable
receipt printing, press the 

M

key and select RCP SW. from the menu to select an option, OFF.  When the

function is in the OFF status, the receipt off indicator “R” is highlighted.

■

Prior to any item entries, a cashier must enter his/her cashier codes into the POS terminal.  Follow the
procedure shown below.

To sign on:

To sign off:

Clerk assignment
To sign on:

To sign off:

˚

Clerk code

Secret code

(In case of secret code is 0000)

through

CLK

1

CLK

10

˚

˚

CASH

#

Cashier code

Secret code

(In case of secret code is 0000)

through

CASH

1

CASH

10

CASH

#

CASH

#

3

In the following examples, your POS terminal will go into an error state accompanied by a warning beep and
the error message on the display. Clear the error state by pressing the 

L

key and take a proper action.

• When you exceed a 32-digit number (entry limit overflow):

Cancel the entry and reenter a correct number.

• When you make an error in key operation:

Clear the error and try the entry again.

• When you make an entry beyond a programmed amount entry limit:

Check to see if the entered amount is correct.  If it is correct, it can be rung up in the MGR mode. 
Contact your manager. 

• When an including-tax subtotal exceeds eight digits:

Delete the subtotal by pressing the 

L

key and press a media key to finalize the transaction.

Your POS terminal allows you to select functions from a menu. For example, if you want to enter an item for
check 1 sale, select the option “CHECK1” from the “CHECK” menu instead of pressing the 

h

key.

Each menu can be opened as follows:

Ç

´

ç

M

K

t