Sharp ER-A410 / ER-A420 SCANNING (serv.man3) Service Manual ▷ View online
File Allocation
Designs and specification are subject to change without notice Page 41
Section-3: File Allocation
File Allocation
Designs and specification are subject to change without notice Page 42
Memory Allocation
975 X
YYYY
File No.
X: see the chart below
YYYY: see the chart below
MRS = see the chart below
YYYY: see the chart below
MRS = see the chart below
Notes:
(1) The maximum number for “YYYY” cannot be exceeded.
(2) The codes indicated are for PGM and REG mode operations
(2) The codes indicated are for PGM and REG mode operations
MRS DEFAULTS
FILE NAME
X
YYYY
Codes
ERA410 ERA420
Departments 1
1-99
2
-digits
20
10
PLU/UPC 2
0-1500 6-digits
500
500
PBLU 3
0-999
4-digits
50
0
Cashier 4
1-20 2-digits
20
20
Number of Overlapped
Cashier
5 0:
0
Note:
Same as
the number of
cashiers [**}
allocated
2-digits 0 0
KP Buffer
6
0 = Erase
1 = Create
Same as
Reg Buffer
0 0
.
@
CASH
@
PERIPHERALS
Designs and specification are subject to change without notice Page 43
Section-4: PERIPHERALS
PERIPHERALS
Designs and specification are subject to change without notice Page 44
Overview – Cable & Communications Specifications
RS-232 connections are simple, universal and a supported data interface for the ER-A410 and
ER-A420 model ECRs. The standards for communications of 256kbps or less and line lengths of
15m (50 ft) or less will depend on the length and quality of the cable.
1. Specifications:
RS-232 connections are simple, universal and a supported data interface for the ER-A410 and
ER-A420 model ECRs. The standards for communications of 256kbps or less and line lengths of
15m (50 ft) or less will depend on the length and quality of the cable.
1. Specifications:
(1) Cable: 24 – 28 AWG, Shielded, twisted pair – (refer to the chart on the next page)
(2) Connector: D – Sub 9 pin (female type) connector.
(3) Baud Rate: (Please refer to each peripheral’s section)
(2) Connector: D – Sub 9 pin (female type) connector.
(3) Baud Rate: (Please refer to each peripheral’s section)
2. Pin Outs:
(Please refer to each peripheral’s section)
3. ECR Pin Outs:
The DB-9 of the ER-A410 and ER-A420 follows EIA computer specifications for its pin outs as
shown below:
Click on the first or last page to see other ER-A410 / ER-A420 SCANNING (serv.man3) service manuals if exist.