DOWNLOAD Sharp ER-A410 / ER-A420 SCANNING (serv.man3) Service Manual ↓ Size: 2.13 MB | Pages: 127 in PDF or view online for FREE

Model
ER-A410 ER-A420 SCANNING (serv.man3)
Pages
127
Size
2.13 MB
Type
PDF
Document
Service Manual
Brand
Device
ECR / ERA410 420 Dealer Manual for Scanning Roms
File
er-a410-er-a420-scanning-sm3.pdf
Date
PREV: Sharp ER-A410 / ER-A420 SCANNING (serv.man2) Handy Guide

Sharp ER-A410 / ER-A420 SCANNING (serv.man3) Service Manual ▷ View online

                                                               
System Presets
 
Designs and specification are subject to change without notice                                                                                        Page 13 
 
System Preset: 903 
Bit 
Description 
Data 
MRS 
 Defaults 
 
 
 
A410  A420 
A 
ECR Data Copy (SIO) All RAM data Send/Receive Baud Rate (bps): 
19200/9600 
5/4 
Enter SUM of Selection ----^ 
 
5 5 
---- 
--- 
Measure of Weight for Scale Entries 
Kg/Lb 
2/0 
B 
---- 
--- 
Enter SUM of Selection ----^ 
 
0 0 
   --- 
Tare Weight Entry is allowed 
  Yes/No 
2/0 
C 
Scale Weight System 
1 Int. & 3 Dec./2 Int. & 2 Dec. 
1/0 
Enter SUM of Selection ----^ 
 
0 0 
---- 
--- 
Food Stamp System:  
 
Food Stamp Forgiveness / Tax Payable in Food Stamps 
Tax in Not Payable in Food Stamps / No Food Stamps 
3/2/1/0 
D 
---- 
--- 
Enter SUM of Selection ----^ 
 
0 0 
NOTE: 
•  903-A is applicable for the 02FD.exe utility (not online communications) 
•  Manual Scale Entry is NOT allowed. 
•  To enabled Scale entries 906-D must be set = 1 
System Preset: 904 
Bit 
Description 
Data 
MRS  
Defaults 
 
 
 
A410  A420 
Date is printed 
No/Yes 
4/0 
---- 
--- 
A 
---- 
--- 
Enter SUM of Selection ----^ 
 
0 0 
Consecutive No. is printed 
No/Yes 
4/0 
---- 
--- 
B 
---- 
--- 
Enter SUM of Selection ----^ 
 
0 0 
---- 
--- 
---- 
--- 
C 
---- 
--- 
Enter SUM of Selection ----^ 
 
0 0 
---- 
--- 
---- 
--- 
D 
---- 
--- 
Enter SUM of Selection ----^ 
 
0 0 
NOTE: 
904-A&B applies to Receipts, Slip, and Kitchen Print chits 
                                                               
System Presets
 
Designs and specification are subject to change without notice                                                                                        Page 14 
 
System Preset: 905 
Bit 
Description 
Data 
MRS 
Defaults  
 
 
 
A410  A420 
Tax4 Subtotal is printed on Trans. Reports  
No/Yes 
 4/0 
Gross Tax4 & Refund Tax4 Totals are printed on Trans. 
Reports 
No/Yes 2/0 
A 
Net Tax4 Total is printed on Trans. Reports 
No/Yes 
1/0 
Enter SUM of Selection ----^ 
 
0 0 
Tax is printed when the Taxable Subtotal = $0.00 
Yes/No 
4/0 
Tax is printed when GST is VAT 
No/Yes 
2/0 
B 
Tax is printed when Tax = $0.00 
No/Yes 
1/0 
Enter SUM of Selection ----^ 
 
0 0 
GST Exempt is printed on Trans. Reports 
No/Yes 
4/0 
---- --- 
C 
---- ---- 
Enter SUM of Selection ----^ 
 
0 0 
D 
Canadian Tax System: 
Type10/Type9/Type8/Type7/Type6/Type5/Type4/Type3/Type2/Type1 
9/8/7/
6/5/4/
3/2/1/
0 
Enter SUM of Selection ----^ 
 
5 5 
NOTE: 
•  905-C is related to 905-D the Canadian Tax System 
System Preset: 906 
 
Bit 
Description 
Data 
MRS 
Defaults 
 
 
 
A410 
A420 
Dept. & PLU/UPC Codes are printed 
Yes/No 
4/0 
A  PLU/UPC (EAN) Stock System: 
Entry is Inhibited/Error Message and Operation continues/Allowed 
2/1/0 
Enter SUM of Selection ----^ 
 
0 0 
Bottle Return Function is Enabled 
Yes/No 
4/0 
Hash Dept. is Enabled 
Yes/No 
2/0 
B 
---- 
--- 
Enter SUM of Selection ----^ 
 
0 0 
C 
Multiplication System: 
Fast Food (FF sequence)/Split-Price/Successive 
Multiplication/Multiplication 
 
3/2/1/
0 
Enter SUM of Selection ----^ 
 
2 2 
PLU/UPC (EAN) Price Look Up at Refund Entry 
No/Yes 
4/0 
Presetting of the Consecutive No. is Enabled 
No/Yes 
2/0 
D 
Fractional Qty System is enabled (3 decimal places) 
Yes/No 
1/0 
Enter SUM of Selection ----^ 
 
0 0 
NOTE: 
•  906-D must not be changed until after totalizers are reset (Qty 0 Æ 0.000 & vice-versus) 
•  Fractional entries are disabled when a SCALE is enabled in PGM2 Job #2690 programming. 
                                                               
System Presets
 
Designs and specification are subject to change without notice                                                                                        Page 15 
 
 
System Preset: 907 
Bit 
Description 
Data 
MRS 
Defaults 
 
 
 
A410 
A420 
---- 
--- 
---- 
--- 
A 
---- 
--- 
Enter SUM of Selection ----^ 
 
0 0 
---- 
--- 
UPC (EAN) Code Printing on Journal 
No/Yes 
2/0 
B 
UPC (EAN) Code Printing on Receipt 
No/Yes 
1/0 
Enter SUM of Selection ----^ 
 
0 0 
X Report is Enforced prior to Ind./All Cashier CCD  
Yes/No 
4/0 
---- 
2/0 
C 
Minus Dept. and PLU/UPC (EAN) items are Enabled 
Yes/No 
1/0 
Enter SUM of Selection ----^ 
 
1 1 
---- 
--- 
---- 
--- 
D 
---- 
--- 
Enter SUM of Selection ----^ 
 
0 0 
NOTE: 
•  To enable Coupon PLU items 907-D must be set = 1 
 
System Preset: 908 
Bit 
Description 
Data 
MRS 
Defaults 
 
 
 
A410 
A420 
GT1 is printed on the Trans.-Z Report 
No/Yes 
4/0 
GT2 is printed on the Trans.-Z Report 
No/Yes 
2/0 
A 
GT3 is printed on the Trans.-Z Report 
No/Yes 
1/0 
Enter SUM of Selection ----^ 
 
0 0 
GT1 is printed on the Trans.-X Report 
Yes/No 
4/0 
GT2 is printed on the Trans.-X Report 
Yes/No 
2/0 
B 
GT3 is printed on the Trans.-X Report 
Yes/No 
1/0 
Enter SUM of Selection ----^ 
 
0 0 
VOID-mode operations affect the Hourly Report 
Yes/No 
4/0 
X//Z1 Reports may taken in X2/Z2 Mode 
 No/Yes 
2/0 
C 
Consecutive No. is Reset upon a Trans.-Z Report 
Yes/No 
1/0 
Enter SUM of Selection ----^ 
 
0 0 
X/Z Report Printing: 
Journal only/Receipt & Journal 
4/0 
---- 
--- 
D 
Trans.-Z1 Report resets the GT 
Yes/No 
1/0 
Enter SUM of Selection ----^ 
 
0 0 
NOTE: 
•  908-D: The X/Z Report printing option does not apply to Individual Cashier Report 
 
                                                               
System Presets
 
Designs and specification are subject to change without notice                                                                                        Page 16 
 
System Preset: 909 
Bit 
Description 
Data 
MRS 
Defaults 
 
 
 
A410 
A420 
---- 
--- 
Training GT is printed on the Trans.-X Report 
Yes/No 
2/0 
A 
Training GT is printed on the Trans.-Z Report 
No/Yes 
1/0 
Enter SUM of Selection ----^ 
 
2 2 
PLU/UPC (EAN) Item Data is printed on the Z Report 
No/Yes 
4/0 
---- 
--- 
B 
---- 
--- 
Enter SUM of Selection ----^ 
 
0 0 
VOID-mode & MGR VOID is printed on the Trans.-Z2 Report 
No/Yes 
4/0 
VOID-mode & MGR VOID is printed on the Trans.-Z1 Report 
No/Yes 
2/0 
C 
---- 
--- 
Enter SUM of Selection ----^ 
 
0 0 
---- 
--- 
---- 
--- 
D 
---- 
--- 
Enter SUM of Selection ----^ 
 
0 0 
NOTE: 
•  909-B: No Sales Data is printed for the PLU/UPC (EAN)-Z Report when = 4 
System Preset: 910 
Bit 
Description 
Data 
MRS 
Defaults 
 
 
 
A410 
A420 
---- 
--- 
Overlapped Cashier Function 
Yes/No 
1/0 
A 
---- 
--- 
Enter SUM of Selection ----^ 
 
0 0 
Cashier Code Display  
Appear/Hidden 
2/0 
Auto Sign Off at the End of the 
Transaction 
Yes (Everytime) / No  
After Cashier Z1 Only 
1/0 
B 
---- 
--- 
Enter SUM of Selection ----^ 
 
2 2 
---- 
--- 
Server/Cashier Sign-on System 
Auto Sign-Off/Stay-Down 
2/0 
C 
---- 
--- 
Enter SUM of Selection ----^ 
 
0 0 
(Fixed): Server/Cashier system is code entry 
4 
---- 
--- 
D 
---- 
--- 
Enter SUM of Selection ----^ 
 
4 4 
NOTE: 
•  910-A: The Cash drawer opening is based on the Individual Server preset 
•  910-C: The Server stay-down system requires a manual sign-off sequence 
 
Page of 127
Display

Click on the first or last page to see other ER-A410 / ER-A420 SCANNING (serv.man3) service manuals if exist.

RANDOM: