Sharp ER-A280 / ER-A280N / ER-A280F (serv.man7) User Manual / Operation Manual ▷ View online
39
■ EAN price change function
To use this function, consult your dealer.
You can use this function when you need to change the unit price or associated department of an EAN item
in REG/MGR mode.
There are two methods for change:
1. Price change mode
in REG/MGR mode.
There are two methods for change:
1. Price change mode
You can change the preset price and/or the associated department of an EAN item without entering PGM
mode.
mode.
2. Changing price during a transaction
When you has found a wrong EAN price and/or associated department upon transaction, you can correct
them at the time of transaction. With the entry of new price and/or associated department, the preset
price and/or associated department is automatically changed to the new price and/or associated
department.
them at the time of transaction. With the entry of new price and/or associated department, the preset
price and/or associated department is automatically changed to the new price and/or associated
department.
For the Non-PLU type EAN codes having price info. and press codes, the prices in the codes
have the priority over the preset prices. So, for these codes, a changed price is valid only when
price change is executed.
have the priority over the preset prices. So, for these codes, a changed price is valid only when
price change is executed.
Price change mode
Changing price during a transaction
*: Associated department can be changed only when the totalizer of the item is “0”.
s
Ê
EAN code
Dept code
Department key
Ä
Scan EAN code
To cancel
To keep the price
C
Unit price
To change the associated dept.
by using the dept. code
by using the dept. code
To change the associated dept.
directly by depressing the
corresponding key
directly by depressing the
corresponding key
or
e A
or
e A
*
Price entry window is displayed.
s
Ê
EAN code
Dept code
or
Department key
Ä
Scan EAN code
Price entry window is displayed.
To cancel the mode
To keep the price
*
e A
or
e A
C
Unit price
To change the associated dept.
by using the dept. code
by using the dept. code
To change the associated dept.
directly by depressing the
corresponding key
directly by depressing the
corresponding key
Procedure
NOTE
NOTE
ER-A280F_N(SEEG)(E)-2 09.6.18 6:50 AM Page 39
40
Price change mode
Changing a price during a transaction
• When an undefined code is entered in the price change mode, the register goes to an error
status.
• When you press the
Ê
key during a transaction, the EAN entry is voided of the 1st depression
of the
Ê
key, then you are allowed to enter a correct price and/or associated department.
• When an associated department is changed, the item label for the department will be also
changed automatically to the item label of new associated department.
• For the repeat entry, use the
+
key.
■ Set PLU/EAN entries
Operation is the same as that for normal PLU/EAN entries.
When a setl PLU/EAN is entered, the labels of those PLUs tied to the set PLU/EAN are printed
automatically.
When a setl PLU/EAN is entered, the labels of those PLUs tied to the set PLU/EAN are printed
automatically.
w
A
A
Print
Key operation
Example
NOTE
5087654321106
s
Ê
600
e
e
A
e
A
Print
Key operation
Example
Ê
5087654321106
s
600
e
e
e
Print
Key operation
Example
ER-A280F_N(SEEG)(E)-2 09.6.18 6:50 AM Page 40
41
■ PLU level shift (for direct PLUs)
This shift can double or triple the number of direct PLUs on your register without adding additional direct
PLU keys. You can use direct PLUs in three levels by the PLU level shift keys
PLU keys. You can use direct PLUs in three levels by the PLU level shift keys
⁄
thru
‹
.
Level key shifts the PLU level from the other two to the required level. (The normal level is the level 1.)
You must program your machine in the PGM mode to select one of the two PLU level shift modes —
automatic return mode* and lock shift mode** — and decide whether to allow PLU level shift in both the
REG and MGR modes or in the MGR mode alone.
* The automatic return mode automatically shifts the PLU level back to level 1 after pressing a direct PLU
You must program your machine in the PGM mode to select one of the two PLU level shift modes —
automatic return mode* and lock shift mode** — and decide whether to allow PLU level shift in both the
REG and MGR modes or in the MGR mode alone.
* The automatic return mode automatically shifts the PLU level back to level 1 after pressing a direct PLU
key or finalizing each transaction.
** The lock shift mode holds the current PLU level until depression of a PLU level shift key.
Automatic return mode (for PLU levels)
If your register has been programmed for PLU level in the automatic return mode, press a desired PLU level
shift key before a numeric entry.
If your register has been programmed for PLU level in the automatic return mode, press a desired PLU level
shift key before a numeric entry.
When you use the FF method, you need not press the
x
key for multiplication entries.
Lock shift mode (for PLU levels)
If your register has been programmed for PLU level in the lock shift mode, press a desired PLU level shift
key before a numeric entry.
If your register has been programmed for PLU level in the lock shift mode, press a desired PLU level shift
key before a numeric entry.
When you use the FF method, you need not press the
x
key for multiplication entries.
NOTE
Direct PLU
Stay in the current level
(Q’ty, )
Numeric entry
x
through
⁄
‹
Procedure
NOTE
Direct PLU
(Finalization)
(Q’ty, )
Numeric entry
Direct PLU
Return to level 1
(Q’ty, )
Numeric entry
(Returning every item entry)
(Returning every transaction)
x
x
through
⁄
‹
through
⁄
‹
Procedure
ER-A280F_N(SEEG)(E)-2 09.6.18 6:50 AM Page 41
42
Level 1 : PLU code 1, PLU code 2
Level 2 : PLU code 70, PLU code 65
Level 2 : PLU code 70, PLU code 65
• When your register has been programmed for the automatic return mode (by one item):
Level 1 : PLU code 1, PLU code 2
Level 2 : PLU code 70, PLU code 65
Level 2 : PLU code 70, PLU code 65
• When your register has been programmed for the lock shift mode:
■ Price level shift
Two different price levels can be programmed for each PLU.
The price levels can be changed for PLU registrations.
You can shift the PLU price level (level 1 or 2) by utilizing the price level shift key (
The price levels can be changed for PLU registrations.
You can shift the PLU price level (level 1 or 2) by utilizing the price level shift key (
).
You must program a price level shift mode (i.e. automatic return mode* or lock shift mode**) and the
operating mode to be used for the price level shift (i.e. both REG/MGR modes or MGR mode alone).
* The automatic return mode automatically shifts the PLU price level back to level 1 after a PLU shift entry.
operating mode to be used for the price level shift (i.e. both REG/MGR modes or MGR mode alone).
* The automatic return mode automatically shifts the PLU price level back to level 1 after a PLU shift entry.
You can select whether the price level should return each time you enter one item or each time you
finalize one transaction.
finalize one transaction.
** The lock shift mode holds the current PLU price level until pressing the price level shift key.
Automatic return mode (for price level)
If your register has been programmed for the price level shift in the automatic return mode, press the price
level shift key before a numeric entry.
If your register has been programmed for the price level shift in the automatic return mode, press the price
level shift key before a numeric entry.
(each item)
PLU code
(Q’ty,
≈
etc.)
Numeric entry
Direct PLU
˘
SHIFT
P
Procedure
˘
SHIFT
⁄ 1
¤ 1
¤ 1
2
A
A
Print
Key operation
1
¤ 1
2
A
A
Print
Key operation
Example
ER-A280F_N(SEEG)(E)-2 09.6.18 6:50 AM Page 42
Click on the first or last page to see other ER-A280 / ER-A280N / ER-A280F (serv.man7) service manuals if exist.