Sharp ER-A280 / ER-A280N / ER-A280F (serv.man7) User Manual / Operation Manual ▷ View online
19
Displays
■ Operator display
• Screen example 1 (REG mode)
PLU level shift indicator (L1-L3)
: Shows the PLU level currently selected.
Price level shift indicator (P1-P2)
: Shows the PLU/EAN price level currently selected.
Receipt ON/OFF status indicator (R)
: Appears when the receipt ON-OFF function signs OFF.
VAT shift status indicator (V)
: Appears when the VAT status is shifted.
Stock alarm indicator (
)
: Appears when the stock of the PLU which you entered is
zero, negative or reaches the minimum stock.
Electronic journal near full indicator ( )
: Appears ( ) when the used memory is 80%.
: Appears ( ) when the used memory is 90%.
: Appears ( ) when the used memory is 95%.
: Appears ( ) when the used memory is 90%.
: Appears ( ) when the used memory is 95%.
Sentinel mark (X)
: Appears in the lower right corner of the screen when the
cash in drawer exceeds a programmed sentinel amount.
The sentinel check is performed for the total cash in drawer.
The sentinel check is performed for the total cash in drawer.
VMP file full indicator (1,2, or 3)
: When a VMP file used memory is 90% or more, its file
number is indicated.
T-Log near full indicator ( )
: Appears ( ) when the used memory is 80%.
: Appears ( ) when the used memory is 90%.
: Appears ( ) when the used memory is 95%.
: Appears ( ) when the used memory is 90%.
: Appears ( ) when the used memory is 95%.
Mode name
Numeric entry area
Sales information area:
When a transaction information occupies more than
3 lines, scroll key(s) appears to indicate you can
scroll to the direction. Sales information you have
just entered such as items and prices will appear
between 1st line and 3rd line.
Total is always appear at 4th line.
When a transaction information occupies more than
3 lines, scroll key(s) appears to indicate you can
scroll to the direction. Sales information you have
just entered such as items and prices will appear
between 1st line and 3rd line.
Total is always appear at 4th line.
Status area:
Status
information
information
Clerk/cashier code
ER-A280F_N(SEEG)(E)-1 09.6.12 11:09 AM Page 19
20
• Screen example 2 (PGM mode)
■ Customer display
■ Screen save mode
When you want to save the electric power or save the display’s life, use the screen save function. This
function can turn the LCD backlight off when any server does not operate the register for an extended
period of time. You can program the time for which your register should keep the normal status (in which the
backlight is “ON”) before it goes into the screen save mode.
This machine will enter the screen save mode two minutes later by default.
To go back to the normal mode, press any key.
function can turn the LCD backlight off when any server does not operate the register for an extended
period of time. You can program the time for which your register should keep the normal status (in which the
backlight is “ON”) before it goes into the screen save mode.
This machine will enter the screen save mode two minutes later by default.
To go back to the normal mode, press any key.
The backlight in the display is a consumable part.
When the LCD display may no longer be adjusted and becomes darker, you should replace the LCD unit.
Consult your authorized SHARP dealer for further details.
When the LCD display may no longer be adjusted and becomes darker, you should replace the LCD unit.
Consult your authorized SHARP dealer for further details.
Mode name
Programming area: Programmable items are
listed.
Status area:
Clerk/cashier code
The display can be tilted back and forth to the best
operational viewing angle.
operational viewing angle.
Do not try to force the display beyond its full position.
NOTE
ER-A280F_N(SEEG)(E)-1 09.6.12 11:09 AM Page 20
Selecting an Operating Mode
When you turn the register on and press the
m
key, the mode selection window will appear on the display,
listing available operating modes as shown below.
Mode selection window
Operating Modes
You can select any mode other than REG from the list in the mode selection window. Your register supports
the following operating modes:
the following operating modes:
This mode allows you to enter various sales information. The mode selection window does
not list this mode. To select this mode from the mode selection window, press the
C
key.
This mode allows servers to take X or Z reports on their sales information.
This mode locks all operations of the register. When you select this mode, the window will
disappear. Pressing any key turns the register ON.
This mode is used to take various daily total reports (X1/Z1 reports).
This mode is used to take various weekly or monthly reports (X2/Z2 reports).
This mode allows you to program those items which need to be changed often such as
unit prices and discount percentages.
This mode allows you to program those items which can be programmed in the PGM1
mode and do not require frequent changes such as date, time, and terminal functions.
This mode allows you to program AUTO menu key and automatic sequencing keys.
This mode allows you to save and load the data of your register to and from an SD card.
REG mode
OP XZ mode
OFF mode
X1/Z1 mode
X2/Z2 mode
PGM1 mode
PGM2 mode
AUTO KEY mode
SD CARD mode
21
2
ER-A280F_N(SEEG)(E)-2 09.6.18 6:50 AM Page 21
22
Mode Selection
Press the
m
key. The following mode screen is displayed.
Use one of the following ways:
• Move the cursor to the desired option by using the
• Move the cursor to the desired option by using the
·
or
°
key, and press the
e
key.
• Enter the desired option number by using a numeric key and press the
e
key.
When you want to enter the REG mode, simply press the
C
key.
NOTE
Procedure
ER-A280F_N(SEEG)(E)-2 09.6.18 6:50 AM Page 22
Click on the first or last page to see other ER-A280 / ER-A280N / ER-A280F (serv.man7) service manuals if exist.