Sharp DV-HR300H (serv.man20) User Manual / Operation Manual ▷ View online
29
Channel Setting
VIDEO Plus+
Deleting Channels
If there is a channel you want to delete from
the Recorder memory, follow the procedure
below.
the Recorder memory, follow the procedure
below.
1
Press START MENU to display
the “START MENU” screen.
the “START MENU” screen.
2
Press ' / " / \ / | to select
“OTHER SETTINGS 2”, then press
SET/ENTER.
“OTHER SETTINGS 2”, then press
SET/ENTER.
3
Press ' / " to select “CHANNEL
SORT”, then press SET/ENTER.
SORT”, then press SET/ENTER.
4
Press ' / " to select “CANCEL”,
then press SET/ENTER.
then press SET/ENTER.
5
Press ' / " / \ / | to highlight the
channel to be cancelled.
channel to be cancelled.
Re-naming Channels
When your Recorder tunes in broadcast
channels automatically, it names them using
the VPS/PDC information. You can change the
name of the channel with the following
procedure.
channels automatically, it names them using
the VPS/PDC information. You can change the
name of the channel with the following
procedure.
1
Press START MENU to display
the “START MENU” screen.
the “START MENU” screen.
2
Press ' / " / \ / | to select
“OTHER SETTINGS 2”, then press
SET/ENTER.
“OTHER SETTINGS 2”, then press
SET/ENTER.
3
Press ' / " to select “CHANNEL
SORT”, then press SET/ENTER.
SORT”, then press SET/ENTER.
4
Press ' / " to select “NAME”,
then press SET/ENTER.
then press SET/ENTER.
5
Press ' / " / \ / | to highlight the
channel to be re-named. Then
press SET/ENTER.
channel to be re-named. Then
press SET/ENTER.
6
Press SET/ENTER twice to
cancel the channel.
cancel the channel.
C A NC E L
: S E L E C T
1 / 5
: R E T URN
: E N T E R
1
C H 5 0
7
2 B B C 1
8
3 B B C 2
9
4 I T V
1 0
5 C H 4
1 1
6 C H 5
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 4
1 5
1 6
1 7
1 8
C A NC E L
: S E L E C T
1 / 5
: R E T URN
: E N T E R
1
B B C 1
7
2 B B C 2
8
3 I T V
9
4 C H 4
1 0
5 C H 5
1 1
6
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 4
1 5
1 6
1 7
1 8
7
When all the channels you wish
have been cancelled, either press
RETURN to return to the “CHAN-
NEL SORT” screen or press
START MENU or EXIT to return
to the normal screen.
have been cancelled, either press
RETURN to return to the “CHAN-
NEL SORT” screen or press
START MENU or EXIT to return
to the normal screen.
N AME
S E L E C T E D :
CH 5 0
1 / 5
: R E T URN
: E N T E R
1
C
H 5 0
7
2 B B C 1
8
3 B B C 2
9
4 I T V
1 0
5 C H 4
1 1
6 C H 5
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 4
1 5
1 6
1 7
1 8
: S E L E C T
: C H A NG E
6
To enter a new channel name use
' / " to scroll through the
characters and \ / | to move to
the next position. Then press
SET/ENTER.
' / " to scroll through the
characters and \ / | to move to
the next position. Then press
SET/ENTER.
7
If any more channels are to be re-
named, repeat the procedure from
step 5 to 6.
named, repeat the procedure from
step 5 to 6.
8
When all the channels are named
correctly, either press RETURN
to return to the “CHANNEL SORT”
screen or press START MENU or
EXIT to return to the normal
screen.
correctly, either press RETURN
to return to the “CHANNEL SORT”
screen or press START MENU or
EXIT to return to the normal
screen.
7
If any more channels are to be
moved, repeat the procedure from
step 5 to 6.
moved, repeat the procedure from
step 5 to 6.
8
When all the channels are in your
preferred order, either press
RETURN to return to the “CHAN-
NEL SORT” screen or press
START MENU or EXIT to return
to the normal screen.
preferred order, either press
RETURN to return to the “CHAN-
NEL SORT” screen or press
START MENU or EXIT to return
to the normal screen.
DV-HR300H-026-033
04.1.16, 2:49 PM
29
30
Post Code Security
This feature should allow the Police to identify
you as the owner of the Recorder if it is
stolen. Each time the Recorder is turned on,
your postcode will be displayed for 5
seconds. Your postcode cannot be changed
or removed without first entering the correct
PIN-number. If you with to use this function,
follow the procedure below.
you as the owner of the Recorder if it is
stolen. Each time the Recorder is turned on,
your postcode will be displayed for 5
seconds. Your postcode cannot be changed
or removed without first entering the correct
PIN-number. If you with to use this function,
follow the procedure below.
1
Press START MENU to display
the “START MENU” screen.
the “START MENU” screen.
2
Press ' / " / \ / | to select
“OTHER SETTINGS 2”, then press
SET/ENTER.
“OTHER SETTINGS 2”, then press
SET/ENTER.
Post Code
VIDEO Plus+
3
Press ' / " to select “POST
CODE”, then press SET/ENTER.
CODE”, then press SET/ENTER.
4
Press the Number buttons or ' /
" to enter your desired PIN
number.
" to enter your desired PIN
number.
• This must be a 4 digit number in the
range 0000 – 9999.
MOD E
S E T T I NG
MAN U A L
T U N I NG
CH A NN E L
S OR T
C L OC K
S E T T I NG
POS T COD E
: S E L E C T
: R E T URN
: E N T E R
5
After entering the PIN number,
press | to highlight the first digit
of “POST CODE”.
press | to highlight the first digit
of “POST CODE”.
6
To enter your post code press ' /
" to scroll through the charac-
ters, then press \ / | to move to
the next position.
" to scroll through the charac-
ters, then press \ / | to move to
the next position.
7
Press SET/ENTER to confirm.
8
Write your PIN number in the box
provided for future reference.
provided for future reference.
Changing PIN NUMBER
You can change your PIN number at any time
with the following procedure.
with the following procedure.
1
Press START MENU to display
the “START MENU” screen.
the “START MENU” screen.
2
Press ' / " / \ / | to select
“OTHER SETTINGS 2”, then press
SET/ENTER.
“OTHER SETTINGS 2”, then press
SET/ENTER.
3
Press ' / " to select “POST
CODE”, then press SET/ENTER.
CODE”, then press SET/ENTER.
4
Press the Number buttons or
' / " to enter your current PIN
number, then press SET/ENTER.
' / " to enter your current PIN
number, then press SET/ENTER.
5
Press \ to re-select PIN number.
6
Enter your new PIN number. Press
SET/ENTER to confirm, then
press START MENU or EXIT to
return to a normal screen.
SET/ENTER to confirm, then
press START MENU or EXIT to
return to a normal screen.
Important!
• Keep your Operation Manual separate
from your Recorder.
NOTE
• Your Postcode can be changed at any
time, but you must first enter your correct
PIN number. If the wrong PIN number is
entered, an “ERROR” will appear. Re-enter
the correct number.
PIN number. If the wrong PIN number is
entered, an “ERROR” will appear. Re-enter
the correct number.
DV-HR300H-026-033
04.1.16, 2:49 PM
30
31
Content of TV Screen
Display
Display
When the power is turned on or the channel is
switched.
switched.
1
Preset channel
2
Channel name
3
NICAM signal reception
4
Stereo/Bilingual (I/II) signal reception
5
Audio output mode display
Monitor Output when Re-
ceiving a Stereo or Bilingual
Broadcast
ceiving a Stereo or Bilingual
Broadcast
When receiving a stereo or bilingual
broadcast, press AUDIO to change the audio
output mode to select Monitor Output. See
the table on page 96 for details.
broadcast, press AUDIO to change the audio
output mode to select Monitor Output. See
the table on page 96 for details.
NOTE
• When the signal is weak (hard to hear) in a
stereo broadcast, press AUDIO to turn off
“L R” display on the TV screen and change
the audio output mode to MONO.
“L R” display on the TV screen and change
the audio output mode to MONO.
Checking the Channel,
Remaining Time of HDD
and Number of Titles
Remaining Time of HDD
and Number of Titles
When HDD button on the front of the
Recorder is lit (HDD mode)
Recorder is lit (HDD mode)
1
Press ON SCREEN (under the
cover) or HDD.
cover) or HDD.
• Channel information is displayed.
• The channel information display will
automatically turn off in 5 seconds.
NOTE
• The channel information cannot be viewed
during playback, Time Shift Viewing,
Chasing Playback, or Simultaneous
Recording.
Chasing Playback, or Simultaneous
Recording.
Display Information
Display automatically
disappears in 3 seconds.
disappears in 3 seconds.
PR 2 BBC
R
L
NICAM STEREO
1 2
4
5
3
PR 2 BBC
R
L
NICAM STEREO
HDD
ORIGINAL
ORIGINAL
0 0 : 0 0 : 5 1
HD
OR
OR
I N AL
D
I G
TI
AT
PE
RE
E
TL
19 h10m
REMAIN
0 0 : 0 0 : 2 8
1 / 3 3
4 / 6
4 / 6
F I NE
1
2
3
4
5
6
7
VIDEO Plus+
2
Press ON SCREEN (under the
cover) or HDD again.
cover) or HDD again.
• The HDD information screen is
displayed.
1
Original title playback/Play List play-
back indicator
2
Mode display
• Playback:
• Recording:
• Playback:
• Recording:
REC
• Stop:
3
Recording mode and remaining
(recordable) time
4
Current title number/Total number of
titles
5
Current chapter number/Total number of
chapters
6
Counter
7
Repeat Playback indicator
3
Press ON SCREEN (under the
cover) or HDD again.
cover) or HDD again.
• The screen changes to the counter
display.
4
Press ON SCREEN (under the
cover) or HDD again.
cover) or HDD again.
• Display is turned off.
NOTE
• The HDD information screen (step 2) will
automatically disappear in 1 minute.
• The counter display (step 3) will not
disappear automatically. Press ON
SCREEN (under the cover) or HDD to turn
it off.
SCREEN (under the cover) or HDD to turn
it off.
DV-HR300H-026-033
04.1.16, 6:41 PM
31
32
Checking the Channel,
Remaining Time of DVD
and Number of Titles
Remaining Time of DVD
and Number of Titles
When DVD button on the front of the
Recorder is lit (DVD mode)
Recorder is lit (DVD mode)
1
Press ON SCREEN (under the
cover) or DVD.
cover) or DVD.
• Channel information is displayed.
• The channel information display will
• The channel information display will
automatically turn off in 5 seconds.
2
Press ON SCREEN (under the
cover) or DVD again
cover) or DVD again
• The DVD information screen is
displayed.
1
Disc type, recording format, original title
playback/Play List playback indicators
2
Mode display
• Playback:
• Recording:
• Playback:
• Recording:
REC
• Stop:
3
Recording mode and remaining
(recordable) time
• “FINALIZED” indicator when a
• “FINALIZED” indicator when a
finalized disc is played back.
4
Current title number/Total number of
titles
• Total number of titles (Stop mode)
• Title number currently played back
• Total number of titles (Stop mode)
• Title number currently played back
(Playback mode)
• Title number currently recorded
(Recording mode)
5
Current chapter number/Total number of
chapters
• Total number of chapters (Stop mode)
• Chapter number currently played
• Total number of chapters (Stop mode)
• Chapter number currently played
back (Playback mode)
• Chapter number currently recorded
(Recording mode)
6
Counter
7
Repeat Playback indicator
3
Press ON SCREEN (under the
cover) or DVD again.
cover) or DVD again.
• The screen changes to the counter
display.
4
Press ON SCREEN (under the
cover) or DVD again.
cover) or DVD again.
• Display is turned off.
Display Information
DVD-RW
OR
VR
I N AL
I G
TI
AT
PE
RE
E
TL
REMAIN 0h49m
0 0 : 0 0 : 1 2
1 / 7
1 / 1
1 / 1
F I NE
2
3
4
5
6
7
1
0 0 : 0 0 : 2 6
DVD-RW
OR
VR
I N AL
I G
NOTE
• The DVD information screen (step 2) will
automatically disappear in 1 minute.
• The counter display (step 3) will not
disappear automatically. Press ON SCREEN
(under the cover) or DVD to turn it off.
(under the cover) or DVD to turn it off.
Switching Front Panel
Display
Display
1
Turn the power on.
• Channel display (when watching TV)
• Counter display (during playback/
recording)
2
Press DISPLAY (under the cover).
• Remaining time display (when
watching TV)
• Current title number and chapter
number (during playback)
• Channel currently recorded (during
recording)
3
Press DISPLAY (under the
cover) again.
cover) again.
• The screen returns to the display in
step 1.
VIDEO Plus+
NOTE
• Because of technical reasons the time counter
is rounding up or down during the time
counting process. Therefore small deviations
of the time display are normal.
counting process. Therefore small deviations
of the time display are normal.
Hour
Minute Second
Hour
Minute
Current title Current chapter
Front panel display
DV-HR300H-026-033
04.1.17, 10:42 AM
32
Click on the first or last page to see other DV-HR300H (serv.man20) service manuals if exist.