DOWNLOAD Sharp DV-HR300H (serv.man20) Service Manual ↓ Size: 2.05 MB | Pages: 33 in PDF or view online for FREE

The Universal Remote Control may operate the
basic functions of 16 different types of TVs.
To enter the Manufacturer’s Code for your TV,
follow the instructions below.

Press OPERATE and CH ' of
TV CONTROL simultaneously.

Enter the 2-digit Manufacturer’s
Code with the Number buttons
(Ex. 02-“0”, “2”) within 10
seconds after releasing OPER-
ATE and CH ' of TV CON-
TROL.

• If the TV turns on/off, setup was

successful. If not, repeat the proce-
dure using another code.

See the list below for the Manufacturer’s Code
and the buttons which work.

• Two types of remote control codes operate

this Recorder: RC-1 and RC-2. If you
operate this Recorder by remote control
along with another SHARP DVD recorder or
DVD player placed next to it simulta-
neously, switching the remote control code
(both the Recorder and remote control) to
one of the signals (RC-1 or RC-2) will let
you operate only with this Recorder.

• Make sure to set the Recorder and remote

control to the same remote code. You can
not operate the Recorder if they are not set
to the same code.

Example: Setting the code to “RC-2”.

• If you cannot, go to step 3.

• The remote control code of the remote

becomes “RC-1” when you change the
batteries.

Press and hold CHANNEL " and
CHANNEL ' on the Recorder
together for more than 5 seconds.

• Each time this operation is performed,

the code of the Recorder toggles
between “RC-1” and “RC-2”. The front
panel display changes as the code
changes.

• Press OPERATE on the remote

control to see if you can turn on/off
the Recorder.

Press OPERATE on the remote control and
check the front panel display (RC-1 or RC-2).
Set the remote control code according to the
display and press OPERATE to see if you
can turn on/off the Recorder.

• If the batteries in the remote control unit are

changed, the code settings must be re-
entered.

• Some brands have more than one code

listed above, due to changes in the codes.
In such cases, try another code to find the
code that operates your TV.

CHANNEL
'

'

'

'

' /"

"

"

"

"

Front display
panel

TV Brand

Manufacturer's Code

FERGUSON

07

GRUNDIG

06

HITACHI

13

ITT NOKIA

08

JVC

15

MITSUBISHI

16

PANASONIC 1

11

PANASONIC 2

12

PHILIPS

03

SANYO

14

SHARP 1

01

SHARP 2

02

SONY

09

THOMSON 1

04

THOMSON 2

05

TOSHIBA

10

• TV Power: OPERATE
• TV Channel up/down: CH '

'

'

'

' / "

"

"

"

"

• TV Volume up/down: VOL +/-
• TV-AV Selector: INPUT

DV-HR300H-015-021

04.1.16, 2:21 PM

21

The following connection is the basic connection to watch or record TV
programmes.

• Be sure to turn off and unplug from the AC outlet this Recorder and all

equipment before connecting the cables.

• Read through the operation manual for the equipment to be connected.

• To connect using S-video or

component cables, see “Using
Other Types of Video Output” on
page 23.

• When connecting to your TV using

SCART cable:

When playing back HDD/DVD, the

recorder side input is selected
automatically. When the channel is
changed at the TV side under this
setting, the selection is normally
changed to the reception channel,
but it may not be changed for
certain TV models. If this happens,
press the TV/DVD button on the
remote control.

TV

Decoder or Satellite System

The Recorder

To LINE 1(TV)
SCART

To SCART
input

To ANTENNA
IN jack

To ANTENNA
OUT jack

To antenna
input jack

Coaxial cable 
(supplied)

Antenna cable
(commercially available)

SCART cable
(commercially
 available)

SCART cable
(commercially
 available)

To LINE 2
SCART

To SCART
output

DV-HR300H-022-025

04.1.19, 1:04 PM

22

The Recorder

Video/Audio cable

(supplied)

TV

To S-VIDEO

output jack

To S-video

input jack

S-video cable
(commercially available)

or

To video/audio
input jacks

To VIDEO/AUDIO
output jacks

In order to view clearer DVD images, it is recommended that you use a commer-
cially available S-video or component video cable when connecting your TV to the
video output.

• When using this connection:

If the option under “START MENU”

- “OTHER SETTINGS 2” - “MODE
SETTING” - “L1 OUT” is changed
to “RGB”, no picture is displayed
on the TV. In this case, hold down
the RGB OFF button on the remote
control (under the cover) for more
than 2 seconds.

To component
input jacks

Component video cable
(commercially available)

The Recorder

To AUDIO
output jacks

To audio
input jacks

To COMPONENT
OUT jacks

Video/Audio cable
(supplied)

TV

• When connecting both S-video

cable and Video/Audio cable to the
Recorder, the image of S-video
cable is displayed.

DV-HR300H-022-025

04.1.16, 2:21 PM

23

When the Recorder power is turned on for the
first time after purchase, the “AUTO INSTAL-
LATION” screen is displayed. You can use the
AUTO INSTALLATION function for easy initial
settings regarding TV channel. From the
second time on, the “AUTO INSTALLATION”
screen will not appear.

• Turn on the power of TV and switch to the

AV input used to connect to the Recorder.

    A U T O  I N S T A L L A
 
P R E S S   E N T E R   K E Y  
 
 

   

T I ON  
 
T O   S T A R T
 
 

 

 

: R E T URN

: E N T E R

• The “AUTO INSTALLATION” screen is

displayed.

               

 

P L E A S E

B E

S UR E

T

A E R I A L / S C A R T

C A B

 

CON N E C T E D .
P R E S S

E N T E R

T O C

 

 

 

 

 

         
HE
L E

I S  

  
ON T I N U E .  
 
 
  

 

 

: R E T URN

: E N T E R

• When you turn on power, the HDD button

and DVD button on the front of Recorder
will blink. If either the HDD or DVD button is
blinking, system processing is in progress,
so wait until the button lights up.

• When the Recorder power is turned on for the

first time after purchase, the “AUTO INSTAL-
LATION” screen is displayed. Follow the
procedure shown on pages 24 to 25.

• The HDD or DVD button on the front of

Recorder will go out, and the STANDBY
indicator will light up.

• If you press OPERATE again immediately

after turning off, the Recorder may not turn
on. If this happens, wait a while and then
turn on power again.

About the Power Supply
• Do not unplug the power cord immedi-

ately after you plug it into the AC outlet
(less than about 15 seconds after
plugging in). In very rare cases, this
may cause the memory to revert to its
initial state, and all timer programmes
will be erased. If you pull out the power
plug while power is on, it will take a
while for the hard disc to get ready
when you turn on power the next time.
During this time you can only view live
broadcasts.

• If you turn on power in a low-tempera-

ture environment, only live broadcast
viewing is possible until the hard disc
(HDD) reaches its operating tempera-
ture.

DV-HR300H-022-025

04.1.17, 10:55 AM

24