Sharp DV-560H (serv.man8) User Manual / Operation Manual ▷ View online
11
GB
Remote Control Preparation
Inserting the Batteries
First, install the batteries as detailed below. Fit two R6 (UM/SUM-3 or AA) 1.5 volt batteries (included) or
equivalent.
If the remote control stops working, insert new batteries.
Ensure the batteries are inserted correctly, matching the polarities (
equivalent.
If the remote control stops working, insert new batteries.
Ensure the batteries are inserted correctly, matching the polarities (
±
/
—
) indicated in the remote control.
•
Do not subject the remote control to shock, water or excessive humidity.
•
The remote control may not function if the DVD Player sensor is in direct sunlight or any other strong light.
•
Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries
properly.
properly.
•
Do not mix old and new batteries, or mix brands in use.
•
Remove the batteries if you will not use the remote control for an extended period of time.
Loading the Batteries
1
1
Open the battery cover.
Open the lid in the direction of the arrow.
Open the lid in the direction of the arrow.
2
Load the batteries.
Load the two R6 (UM/SUM-3 or AA) batteries supplied with the
remote control so that the battery poles
Load the two R6 (UM/SUM-3 or AA) batteries supplied with the
remote control so that the battery poles
±
and
—
are posi-
tioned as indicated.
3
Close the battery cover.
Press the lid in the direction of the arrow.
Press the lid in the direction of the arrow.
GB
12
5
FRONT
SURROUND CENTER DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
Y
Cb
Cr
SUB
WOOFER
2
4
6
1
3
S-VIDEO OUT
VIDEO OUT
OPTICAL
DIGITAL OUT
AC IN
FRONT
SURROUND CENTER
LINE1 OUT
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
SUB
WOOFER
Y
Cb
Cr
FRONT
SURROUND CENTER DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
SUB
WOOFER
Y
Cb
Cr
2
4
5
6
6
1
3
S-VIDEO OUT
VIDEO OUT
OPTICAL
DIGITAL OUT
AC IN
FRONT
SURROUND CENTER
LINE1 OUT
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
SUB
WOOFER
Y
Cb
Cr
FRONT
SURROUND CENTER DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
SUB
WOOFER
Y
Cb
Cr
2
9
4
56
7
1
8
3
Basic Connection
A
C
•
Set the power switch on the player and equipment to
be connected to OFF before connecting.
be connected to OFF before connecting.
•
Read through the Operation manual for the equipment
to be connected.
to be connected.
•
Be sure that the colours of the connectors and plugs
match up when connecting the cord.
match up when connecting the cord.
The connections described below are for video
connection to the S-VIDEO OUT, VIDEO OUT or LINE1
OUT (21-pin Euro-SCART) connector. Set the S-VIDEO
OUT, VIDEO OUT/Y, Cb, Cr selector switch to “S-
VIDEO OUT, VIDEO OUT”.
connection to the S-VIDEO OUT, VIDEO OUT or LINE1
OUT (21-pin Euro-SCART) connector. Set the S-VIDEO
OUT, VIDEO OUT/Y, Cb, Cr selector switch to “S-
VIDEO OUT, VIDEO OUT”.
Connecting to a Stereo TV Set
A
1
TV set (sold separately)
2
DVD player
3
Video/audio cord (supplied)
4
S-video cord (supplied)
5
To audio input connectors (red, white)
6
To video input connector (yellow)
7
To S-video input connector
8
AC power cord (supplied)
9
To power outlet (AC 110-240V, 50/60Hz)
•
For LINE1 OUT connection, see page 13.
•
Refer “VIRTUAL Surround (Audio) Selection” on page 46.
S-video Output Connector
The S-Video (separate) output connector provides
access to separate colour (C) and luminance (Y) signals
before they are combined into composite video (VIDEO
OUT). This gives a sharper picture as the TV set no
longer has to separate them.
Use the S-video cord (supplied) when connecting the
player to a TV set equipped with an S-video input
connector for the best picture clarity possible.
access to separate colour (C) and luminance (Y) signals
before they are combined into composite video (VIDEO
OUT). This gives a sharper picture as the TV set no
longer has to separate them.
Use the S-video cord (supplied) when connecting the
player to a TV set equipped with an S-video input
connector for the best picture clarity possible.
Connecting to a Monaural TV Set
B
1
TV set (sold separately)
2
DVD player
3
Audio cord (commercially available)
4
Video/audio cord (supplied)
5
To audio input connector
6
To video input connector
•
For LINE1 OUT connection, see page 13.
Connecting to Audio Equipment
C
1
Audio equipment (sold separately)
2
TV set (sold separately)
3
DVD player
4
Audio cord (commercially available)
5
To audio input connectors (red, white)
6
Video/audio cord (supplied)
7
S-video cord (supplied) (See above
A
)
•
For LINE1 OUT connection, see page 13.
•
When connecting to audio equipment (2ch), set the
SPEAKER setting in the SET UP window to “2ch /DIG-
ITAL”. See page 16.
SPEAKER setting in the SET UP window to “2ch /DIG-
ITAL”. See page 16.
B
“S-VIDEO OUT, VIDEO OUT” setting
Notes on Installation:
Bundling the cord connecting the DVD player and
television with the antenna cable can cause
electrical interference when you are watching
television programmes. Be sure to keep the DVD
player connection cords separate from the
antenna cord when you install the player.
television with the antenna cable can cause
electrical interference when you are watching
television programmes. Be sure to keep the DVD
player connection cords separate from the
antenna cord when you install the player.
“S-VIDEO OUT, VIDEO OUT” setting
13
GB
Optional Audio Connection
Connecting to an AV Amplifier with
5.1ch Input Connectors Supporting
Dolby Digital (AC-3) or Audio MPEG
Version 2.0
5.1ch Input Connectors Supporting
Dolby Digital (AC-3) or Audio MPEG
Version 2.0
This DVD player contains a Dolby Digital (AC-3) or
Audio MPEG Version 2.0 decoder.
This enables the playback of DVDs recorded in Dolby
Digital or Audio MPEG Version 2.0 without the need for
an optional decoder with Dolby Digital or Audio MPEG
Version 2.0 processing.
When the DVD player is connected to an AV amplifier
with 5.1ch connectors, you can enjoy theatre-quality
audio right in your home when playing discs recorded
in Dolby Digital or Audio MPEG Version 2.0.
Audio MPEG Version 2.0 decoder.
This enables the playback of DVDs recorded in Dolby
Digital or Audio MPEG Version 2.0 without the need for
an optional decoder with Dolby Digital or Audio MPEG
Version 2.0 processing.
When the DVD player is connected to an AV amplifier
with 5.1ch connectors, you can enjoy theatre-quality
audio right in your home when playing discs recorded
in Dolby Digital or Audio MPEG Version 2.0.
1
TV set (sold separately)
2
DVD player
3
Video/audio cord (supplied)
S-video cord (supplied) (See
S-video cord (supplied) (See
A
on page 12)
4
Amplifier with 5.1ch input connectors
(commercially available)
(commercially available)
5
Audio cords (commercially available)
6
To audio input connector (CENTER)
7
To audio input connector (SUBWOOFER)
8
To audio input connectors (SURROUND L
•
R)
9
To audio input connectors (FRONT L
•
R)
0
Centre speaker
q
Front speaker (Left)
w
Front speaker (Right)
e
Subwoofer
r
Surround speaker (Left)
t
Surround speaker (Right)
(
0
-
t
sold separately)
•
For LINE1 OUT connection, see below.
•
Placing the DVD player near a tuner or radio could
cause interference during AM broadcast reception. If
this occurs, move the tuner or radio further away.
cause interference during AM broadcast reception. If
this occurs, move the tuner or radio further away.
•
The speaker connections describe the example used
here. For more information, refer to the Operation
manual for your AV amplifier.
here. For more information, refer to the Operation
manual for your AV amplifier.
SETTING UP
2
S-VIDEO OUT
VIDEO OUT
VIDEO OUT
OPTICAL
DIGITAL OUT
FRONT
SURROUND CENTER
LINE1 OUT
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
SUB
WOOFER
Y
Cb
Cr
FRONT
SURROUND CENTER DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
SUB
WOOFER
Y
Cb
Cr
S-VIDEO OUT
VIDEO OUT
OPTICAL
DIGITAL OUT
LINE1 OUT
9 8 6
7
1
3
3
5 5 5
4
0
w
t
q
e
r
“S-VIDEO
OUT, VIDEO
OUT” position
OUT, VIDEO
OUT” position
S-VIDEO OUT
VIDEO OUT
OPTICAL
DIGITAL OUT
CLASS 1
LASER PRODUCT
LASER PRODUCT
FRONT
SURROUND CENTER
LINE1 OUT
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
SUB
WOOFER
Y
Cb
Cr
FRONT
SURROUND CENTER DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
SUB
WOOFER
Y
Cb
Cr
S-VIDEO OUT
VIDEO OUT
OPTICAL
DIGITAL OUT
LINE1 OUT
LINE1 OUT
“S-VIDEO OUT, VIDEO OUT” position
21-pin
Euro-SCART
cable
Euro-SCART
cable
Connecting to a Monitor or TV
Equipped with a 21-pin Euro-SCART
Connector
Equipped with a 21-pin Euro-SCART
Connector
When connecting the player to a TV set equipped with a
21-pin Euro-SCART connector, use a 21-pin Euro-
SCART cable (commercially available) connected to the
LINE1 OUT connector instead of the video/audio cable
supplied with the player connected to the VIDEO OUT
connector.
Set the S-VIDEO OUT, VIDEO OUT/Y, Cb, Cr selector
switch to S-VIDEO OUT, VIDEO OUT setting.
21-pin Euro-SCART connector, use a 21-pin Euro-
SCART cable (commercially available) connected to the
LINE1 OUT connector instead of the video/audio cable
supplied with the player connected to the VIDEO OUT
connector.
Set the S-VIDEO OUT, VIDEO OUT/Y, Cb, Cr selector
switch to S-VIDEO OUT, VIDEO OUT setting.
1. If you switch the DVD player on while you are watching a TV broadcast, the TV screen automatically
switches to AV mode and starts showing the DVD image.
2. If you press the
STANDBY
button on the DVD remote control while you are watching a DVD disc on the
TV, the DVD image disappears and the picture reverts to the original image.
If you then press the
If you then press the
PLAY
button on the DVD player, the DVD image returns.
On some TVs, the above operations may not work as described.
GB
14
S-VIDEO OUT
VIDEO OUT
OPTICAL
DIGITAL OUT
FRONT
SURROUND CENTER
LINE1 OUT
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
SUB
WOOFER
Y
Cb
Cr
FRONT
SURROUND CENTER DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
SUB
WOOFER
Y
Cb
Cr
S-VIDEO OUT
VIDEO OUT
OPTICAL
DIGITAL OUT
LINE1 OUT
1
2
3
3
5
5
6 6
4
7
Optional Audio Connection
Connecting to a Decoder with
Dolby Digital (AC-3)/MPEG Audio
Version 2.0 Processing
Dolby Digital (AC-3)/MPEG Audio
Version 2.0 Processing
When DVDs recorded in Dolby Digital or Audio MPEG
Version 2.0 are played, Dolby Digital or Audio MPEG
Version 2.0 bit stream is output from the DVD player’s
OPTICAL DIGITAL OUT connector and DIGITAL OUT
connector. When the DVD player is connected to a
Dolby Digital or Audio MPEG Version 2.0 decoder, you
can enjoy theatre-quality audio right in your home.
(An optional optical digital cable is required when an
optional Dolby Digital decoder is used. Similarly, you
must purchase a separate cable when you use the
DIGITAL OUT connector.)
Version 2.0 are played, Dolby Digital or Audio MPEG
Version 2.0 bit stream is output from the DVD player’s
OPTICAL DIGITAL OUT connector and DIGITAL OUT
connector. When the DVD player is connected to a
Dolby Digital or Audio MPEG Version 2.0 decoder, you
can enjoy theatre-quality audio right in your home.
(An optional optical digital cable is required when an
optional Dolby Digital decoder is used. Similarly, you
must purchase a separate cable when you use the
DIGITAL OUT connector.)
Preparation
•
If you are using the OPTICAL DIGITAL OUT or
DIGITAL OUT connectors, the SPEAKER setting in
the SET UP window must be set to “2ch/DIGITAL”.
DIGITAL OUT connectors, the SPEAKER setting in
the SET UP window must be set to “2ch/DIGITAL”.
1
TV set (sold separately)
2
DVD player
3
Video/audio cord (supplied)
S-video cord (supplied) (See
A
on page 12)
4
Decoder or Amplifier with Dolby Digital (AC-3)
processing (commercially available)
5
Optical digital cable (commercially available)/or
coaxial cable (commercially available). (Use the
appropriate cable for your audio system.)
6
Connector for optical digital sound input or coaxial
digital input. (Use the appropriate connector for
your audio system.)
7
Connect the speakers. (See page 13.)
•
For LINE1 OUT connection, see page 13.
“S-VIDEO OUT,
VIDEO OUT”
position
VIDEO OUT”
position
1) The DVD player is set to “PAL” at shipment.
2) No action is required if you are playing PAL discs (UK TV standard).
3)
2) No action is required if you are playing PAL discs (UK TV standard).
3)
If you wish to play an NTSC disc or are using the DVD player with an NTSC only TV, then insert an
NTSC disc immediately after the DVD player is connected to the mains and switched on. The DVD
player will then automatically switch to NTSC mode operation.
NTSC disc immediately after the DVD player is connected to the mains and switched on. The DVD
player will then automatically switch to NTSC mode operation.
4) If you have played a PAL disc and then wish to use an NTSC disc, play the NTSC disc as described in 3)
above and bring up the NTSC Setup screen.
Preparing to Bring Up the SETUP Screen (to select PAL disc or NTSC disc playback)
Remove the
protective cap
before connecting.
protective cap
before connecting.
Click on the first or last page to see other DV-560H (serv.man8) service manuals if exist.