Sharp BD-HP22H (serv.man9) User Manual / Operation Manual ▷ View online
Audio Connections
Connecting to the Audio Jacks
You can connect audio equipment or the TV to the 2CH AUDIO output jacks.
This Player
Audio equipment with audio jacks
STEPS
Be sure to turn off this Player and the equipment before making any connections.
Firmly connect the AV cable (supplied) to the audio jacks (
Firmly connect the AV cable (supplied) to the audio jacks (
1 and 2).
1
2
2
After connecting
Load a disc and start playback. (Pages 25–30)
•
To 2CH AUDIO
output jacks
output jacks
To AUDIO input
jacks
jacks
(White)
AV cable (supplied)
Amplifier
1
(Red)
TV
2
(White) (Red)
Red
White
Red
White
19
Connection
LAN
Broadband Internet Connection
Connecting to the ETHERNET terminal
You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-
LIVE compatible discs. Refer to pages 27 and 40 regarding further information on BD-LIVE functions.
When using the internet, a broadband internet connection as shown below is required.
LIVE compatible discs. Refer to pages 27 and 40 regarding further information on BD-LIVE functions.
When using the internet, a broadband internet connection as shown below is required.
•
•
After connecting
Perform the communication setting. (Pages 41–43)
Load a BD-LIVE compatible disc and play back the contents. (Pages 25 and 27)
Load a BD-LIVE compatible disc and play back the contents. (Pages 25 and 27)
•
•
•
STEPS
Be sure to turn off this Player and the equipment before making any connections.
Firmly connect a LAN cable (commercially available) to the ETHERNET terminal (
Firmly connect a LAN cable (commercially available) to the ETHERNET terminal (
1 and 2).
1
2
2
Example of a Broadband Internet Connection
This Player
20
CAUTION
When using a broadband internet connection, a contract
with an internet service provider is required. For more
details, contact your nearest internet service provider.
Refer to the operation manual of the equipment you have
as the connected equipment and connection method may
differ depending on your internet environment.
with an internet service provider is required. For more
details, contact your nearest internet service provider.
Refer to the operation manual of the equipment you have
as the connected equipment and connection method may
differ depending on your internet environment.
•
•
NOTE
Use a LAN cable/router supporting 10BASE-T/100BASE-
TX.
TX.
•
LAN cable
(commercially available)
(commercially available)
Internet
Modem
Hub or broadband router
PC
To ETHERNET
terminal
terminal
1
To LAN terminal
2
Before Starting Playback
Loading the Batteries in the
Remote Control
Remote Control
Hold in the tab on the battery cover and pull the
cover towards the direction of the arrow.
cover towards the direction of the arrow.
Load the two “AA” size batteries (R-06 size,
UM/SUM-3). Place batteries with their terminals
corresponding to the
UM/SUM-3). Place batteries with their terminals
corresponding to the
m and n indications in
battery compartment.
Insert the smaller tab of the battery cover into
the opening
the opening
1, and press down on the cover
until it clicks in place
2.
NOTE
Do not subject the remote control unit to shock, water or
excessive humidity.
The remote control unit may not function if the Player's
remote sensor is in direct sunlight or any other strong light.
Incorrect use of batteries may cause them to leak or burst.
Read the battery warnings and use the batteries properly.
Do not mix old and new batteries, or mix different brands.
Remove the batteries if you will not use the remote control
unit for an extended period of time.
excessive humidity.
The remote control unit may not function if the Player's
remote sensor is in direct sunlight or any other strong light.
Incorrect use of batteries may cause them to leak or burst.
Read the battery warnings and use the batteries properly.
Do not mix old and new batteries, or mix different brands.
Remove the batteries if you will not use the remote control
unit for an extended period of time.
•
•
•
•
•
•
1
2
3
Connecting the Power Cord
Plug the supplied AC cord into the AC IN terminal on
the rear of the Player. Then plug into AC outlet.
the rear of the Player. Then plug into AC outlet.
NOTE
Place the Player close to the AC outlet, and keep the
power plug within reach.
TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH THE UN-INSULATED PARTS OF ANY CABLES
WHILE THE AC CORD IS CONNECTED.
The
power plug within reach.
TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH THE UN-INSULATED PARTS OF ANY CABLES
WHILE THE AC CORD IS CONNECTED.
The
B (Standby/On) indicator blinks while the Player is
preparing for starting up. You cannot turn the Player on
until the
until the
B (Standby/On) indicator stops blinking.
If you are not going to use this Player for a long period of
time, be sure to remove the AC cord from the AC outlet.
time, be sure to remove the AC cord from the AC outlet.
•
•
•
•
Approximate operating range of
remote control
remote control
Disc Playback
21
Disc Playback
Remote control sensor
Remote control unit
30º
30º
7 m
To AC IN terminal
To AC outlet
Before Starting Playback
Turning the Power On
Turning the power on
Press
B on the remote control or on the Player to
turn on the power of the Player.
Entering standby
Press
B on the remote control or on the Player to
enter standby.
If you press
B again immediately after entering standby,
the Player may not turn on. If this happens, wait for 10
seconds or more and then turn on the power again.
seconds or more and then turn on the power again.
NOTE
When the
B (Standby/On) indicator is blinking (may take
some time), the Player cannot be turned on.
•
•
Indicators on the Player
B (Standby/On) indicator
Green on
Power on
Red blinks
Preparing for standby
Red on
Standby
AQUOS PURE MODE indicator
Green on
Output in AQUOS PURE
MODE (See page 24.)
MODE (See page 24.)
BD/DVD/CD mode indicator
Off
No disc
Blue on
Playing back
White on
Disc stopped
White blinks
Loading a disc
When you turn on the power, the Menu screen
automatically displays for a while.
Press EXIT to erase the display.
automatically displays for a while.
Press EXIT to erase the display.
•
22
B (Power)
BD/DVD/CD mode indicator
AQUOS PURE MODE indicator
B (Standby/On) indicator
Click on the first or last page to see other BD-HP22H (serv.man9) service manuals if exist.