Sharp XL-UR2110H User Manual / Operation Manual ▷ View online
E-34
ENGLISH
8
XL-UR2110H
XL-UR250H
XL-UR230H
Advanced Features
Notes:
When performing timer playback or recording using another unit
connected to the USB terminal or AUX IN sockets, select “USB”
or “AUX” in step 9.
This unit will turn on or enter the power stand-by mode automati-
cally. However, the connected unit will not turn on or off.
During timer playback or timer recording, TIMER indicator light
and timer indicator on display r, will blink.
To stop the blinking, follow step “Cancelling the timer setting in
the timer stand-by mode” on the right hand side of this page.
connected to the USB terminal or AUX IN sockets, select “USB”
or “AUX” in step 9.
This unit will turn on or enter the power stand-by mode automati-
cally. However, the connected unit will not turn on or off.
During timer playback or timer recording, TIMER indicator light
and timer indicator on display r, will blink.
To stop the blinking, follow step “Cancelling the timer setting in
the timer stand-by mode” on the right hand side of this page.
Checking the timer setting in the timer stand-by mode:
Cancelling the timer setting in the timer stand-by mode:
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
12
When the preset time is reached, playback or recording
will start.
will start.
The volume will increase gradually until it reaches the preset
volume.
volume.
13
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
The “r” indicator will blink during timer playback.
The “r” indicator will blink during timer playback.
Daily timer:
The timer operates at the same time every day. It will continue
until the daily timer setting is cancelled. Cancel the daily timer
when it is not in use.
The “DAILY r” indicator will blink during timer playback.
until the daily timer setting is cancelled. Cancel the daily timer
when it is not in use.
The “DAILY r” indicator will blink during timer playback.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
2 Within 10 seconds, press the
or
button to select “ONCE”
or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select “ONCE
CALL” or “DAILY CALL”, and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
The unit returns to the timer stand-by mode after displaying the
settings in order.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
2 Within 10 seconds, press the
or
button to select “ONCE”
or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select “ONCE
OFF” or “DAILY OFF”, and press the MEMORY button.
Timer will be cancelled (the setting will not be cancelled).
Timer will be cancelled (the setting will not be cancelled).
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
2 Within 10 seconds, press the
or
button to select “ONCE”
or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select “ONCE
ON” or “DAILY ON”, and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
E-35
ENGLISH
XL-UR2110H
XL-UR250H
XL-UR230H
Advanced Features
Timer and sleep operation (Remote Control only) (continued)
Sleep operation
The radio, compact disc and USB can all be turned off automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
Press the ON/STAND-BY button whilst “SLEEP” is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
button to select
“SLEEP”, and press the
MEMORY button.
MEMORY button.
4
Press the
or
button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
3 hours - 5 minutes 5-minute intervals
5 minutes - 1 minute 1-minute intervals
5
Press the MEMORY button.
“SLEEP” will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep op-
eration finishes.
eration finishes.
1
Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or
button to select “SLEEP
X : XX”.
“X : XX” is sleep remaining time.
“X : XX” is sleep remaining time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY button (steps 4 - 5).
You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY button (steps 4 - 5).
1
Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or
button to select “SLEEP
OFF”, and press the MEMORY button.
1
Set the sleep time (see left, steps 1 - 5).
2
Whilst the sleep timer is set, set the timer playback (steps 2 -
10, pages 32 - 33).
10, pages 32 - 33).
Sleep timer setting
Timer playback setting
Sleep operation will
automatically stop.
automatically stop.
Timer playback start time
End time
1 minute - 3 hours
Desired time
E-36
ENGLISH
8
XL-UR2110H
XL-UR250H
XL-UR230H
Advanced Features
Enhancing your system
The connection lead is not included. Purchase a commercially
available lead as shown below.
available lead as shown below.
Auto power on function (USB/AUX):
When you press any of the following buttons, the unit turns on.
VIDEO/AUX/USB button (main unit and remote control): The unit
turns on and the “USB” or “AUX” function is activated.
turns on and the “USB” or “AUX” function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD,TUNER,VIDEO/AUX/USB).
Listening to the playback sounds from VCR,
DVD, etc.
DVD, etc.
Note:
To prevent noise interference, place the unit away from the
television.
To prevent noise interference, place the unit away from the
television.
Headphones
Before plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
RIGHT
LEFT
VIDEO/AUX IN
1
Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX IN sockets.
VIDEO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX/USB button.
4
Play the connected equipment.
E-37
ENGLISH
XL-UR2110H
XL-UR250H
XL-UR230H
Advanced Features
Enhancing your system (continued)
Subwoofer connection
When a commercially available subwoofer with a built-in amplifier is
connected to this unit, you can enjoy sound with emphasised bass.
Connect an RCA lead from a commercially available speaker with a
built-in amplifier to the SUBWOOFER PRE-OUT socket.
connected to this unit, you can enjoy sound with emphasised bass.
Connect an RCA lead from a commercially available speaker with a
built-in amplifier to the SUBWOOFER PRE-OUT socket.
Troubleshooting chart
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
General
CD player
Subwoofer with a
built-in amplifier
SUBWOOFER
PRE-OUT
Symptom
Possible cause
The clock is not set to the
correct time.
correct time.
Did a power failure occur? Reset
the clock. (Refer page 11)
the clock. (Refer page 11)
When a button is pressed,
the unit does not respond.
the unit does not respond.
Set the unit to the power stand-
by mode and then turn it back on.
by mode and then turn it back on.
If the unit still malfunctions, reset
it. (Refer page 38)
it. (Refer page 38)
No sound is heard.
Is the volume level set to “0”?
Are the headphones connected?
Are the speaker wires discon-
nected?
nected?
Symptom
Possible cause
Playback does not start.
Is the disc loaded upside down?
Playback stops in the
middle or is not performed
properly.
middle or is not performed
properly.
Does the disc satisfy the
standards?
standards?
Is the disc distorted or
scratched?
scratched?
Playback sounds are
skipped, or stopped in the
middle of a track.
skipped, or stopped in the
middle of a track.
Is the unit located near excessive
vibrations?
vibrations?
Is the disc very dirty?
Has condensation formed inside
the unit?
the unit?
Click on the first or last page to see other XL-UR2110H service manuals if exist.