DOWNLOAD Sharp XL-UR2110H Service Manual ↓ Size: 4.47 MB | Pages: 55 in PDF or view online for FREE

8

XL-UR2110H

XL-UR250H

XL-UR230H

Press in the stop 
mode.

Press in the playback 
mode.

Press in the playback 
mode. Press the   /   
button to resume play-
back from the paused 
point.

Press in the playback 
or stop mode.

If you press the button 
in the stop mode, 
press the   /   button 
to start the desired 
track.

Press and hold down 
in the playback mode.

Release the button to 
resume playback.

Track up/track down is possible only within individual disc.
Fast forward/fast reverse is possible only within individual disc.
When the end of the last track is reached during fast forward,
“END” will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, the unit will enter the playback mode.
Rewritable multi-session discs which writing is not finished, can
still be played.

XL-UR2110H

XL-UR250H

XL-UR230H

You can play a disc by specifying the disc number.

Playback will begin from track 1 on the chosen disc.
After the last track on the last disc is played, the unit stops auto-
matically.

Note:
If a disc tray with no disc is selected, playback will not start and the
disc indicator will disappear.

To stop playback:
Press the   (CD  ) button.

By using the direct search buttons, the desired tracks on the current
disc can be played.

A track number higher than the number of tracks on the disc
cannot be selected.
During random play, direct search is not possible.

To stop playback:
Press the   (CD  ) button.

                          Selected disc number

Within 5 seconds, press the   /   button on the main unit.

Selected track number

 

The direct search buttons allow you to select up to number 9.

When selecting number 10 or higher, use the “+10” button.

 

1 Press the “+10” button once.

2 Press the “1” button.

3 Press the “3” button.

1 Press the “+10” button twice.

2 Press the “1” button.

3 Press the “3” button.

4 Press the “0” button.

8

XL-UR2110H

XL-UR250H

XL-UR230H

Repeat play can play one disc, all 5 discs or a programmed
sequence continuously.

To cancel repeat play:
Press the   /   button again until “ ” will disappear.

The tracks on the disc(s) can be played in random order automatically.

To cancel random play:
Press the   /   button.
“R” will disappear.

If you press the 

 button during random play, you can move to

the track selected next by the random operation. However, the 
button does not allow you to move to the previous track. It will go
to the beginning of the current track instead.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)

Caution:
After performing repeat or random play, be sure to press the   (CD

) button. Otherwise, the disc(s) will play continuously.

Press the   /   button twice.

Press the   /   button three times.

 

Perform steps 1 - 6 in “Programmed play” section on page 17 and 
then press the   /   button twice.

To random play all tracks on up to 5 discs:
Press the RANDOM button on the remote control.

XL-UR2110H

XL-UR250H

XL-UR230H

You can choose up to 32 selections for playback in the order you like.

To cancel the programmed play mode:
Whilst in the stop mode and the “MEMORY” indicator is lit, press the
CLEAR/DIMMER button on the remote control. The “MEMORY” in-
dicator will disappear and all the programmed contents will be
cleared.

Adding tracks to the programme:
If a programme has been previously stored, the “MEMORY” indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original programme.

To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the

 or 

 button.

When a disc with programmed tracks is ejected, the programme
is automatically cancelled.
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
During the programme operation, random play is not possible.

Selected disc number

Selected track number

You can also select a track by pressing the 

 or 

 button.

Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared 
by pressing the CLEAR/DIMMER button.

The total number in memory will ap-
pear.

To clear the programmed selections:
Press the CLEAR/DIMMER button on the re-
mote control whilst the “MEMORY” indicator 
is flashing.
Each time the button is pressed, one track will 
be cleared, beginning with the last track pro-
grammed.