DOWNLOAD Sharp XL-UH240H Service Manual ↓ Size: 2.77 MB | Pages: 44 in PDF or view online for FREE

 

XL-UH240H

  

 

Repeat play can play all tracks sequence continuously.

 

Press the   /   button again until " " will disappear.

  

 

The tracks can be played in random order automatically.

 

Press the   /   button.
"R" will disappear.

  

If you press the 

 button during random play, you can move to

the track selected next by the random operation. On the other
hand, the 

 button does not allow you to move to the previous

track. The beginning of the track being played will be located.

  

In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)

 

After performing repeat, be sure to press the   (USB  ) button. 
Otherwise, it will play continuously.

  

This unit only supports "MPEG-1 Audio Layer-3" format.
(Sampling Frequency  is 32, 44.1, 48kHz)
"MPEG-2 Audio Layer-3" , "MPEG-2.5 Audio Layer-3" and MP1,
MP2 format are not supported.

  

Programme playback for USB memory is not available.

  

Playback order for MP3 files may differ sometimes depending on
the writing software used during file download.

  

Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.

  

For MP3/WMA files, please put ".MP3" ".WMA" extension. Files
cannot be played back if there is no MP3/WMA extension.

  

Playlists are not supported on this unit.

  

This unit can display Folder Name or File Name up to 32
characters.

  

This unit only supports MP3 ID3-Tag version 1.x.

  

The display playback time may not be displayed correctly when
playing back a variable bitrate file.

  

Time display cannot be changed by the DISPLAY button.

  

Title name and artist name can be displayed by pressing the
DISPLAY button during file playback or pause mode.

  

WMA meta tag also supports title, artist and album name which
are recorded in WMA files.

  

Copyright protected WMA files cannot be played back.

 

Press the   /   button twice.

 

Press the RANDOM button on the remote control.

 

(

) When folder mode is on, the selected playmode can be used for

the files in the selected folder only.

 

XL-UH240H

 

 

 

When you press any of the following buttons, the unit turns on.

  

TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.

  

 /   button on the main unit: The unit turns on and playback of

the last function starts (CD,TUNER,VIDEO/AUX/USB).

  

  

When radio interference occurs, auto scan tuning may stop
automatically at that point.

  

Auto scan tuning will skip weak signal stations.

  

To stop the auto tuning, press the TUNING (  or 

 

) button again.

When an RDS (Radio Data System) station is tuned in, the fre-
quency will be displayed first, and then the RDS indicator will light
up. Finally, the station name will appear.
Full auto tuning can be achieved for RDS stations "ASPM", see
page 29.

To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.

" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.

 

Manual tuning:
Press the TUNING (  or 

 

) button as many times as required

to tune in to the desired station.
Auto tuning:
When the TUNING (  or 

 

) button is pressed for more than 0.5

seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.

FM stereo mode indicator

FM stereo receiving indicator

XL-UH240H

You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)

Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead become
disconnected.

 

The stations saved in memory can be scanned automatically.
(Preset memory scan)

Store the stations in memory, in order, starting with preset 
channel 1.

If the "MEMORY" and preset number indicators disappear
before the station is memorised, repeat the operation from step
2.

When a new station is stored in memory, the station previously 
memorised for that preset channel number will be erased.

Press the PRESET  (

 

or  ) button for less than 0.5 seconds to

select the desired station.

1

Press the PRESET (

 

or ) 

button for more than 0.5 seconds.

The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.

2

Press the PRESET  (

 

or  ) button again when the desired

station is located.

1

Press the ON/STAND-BY button to enter the stand-by mode.

2

Whilst pressing down the   1 button and the   5 button, press
the TUNER (BAND) button until "TUNER CLEAR" appears.

XL-UH240H

RDS is a broadcasting service which a growing number of FM
stations provide. These FM stations send additional signals
along with their regular programme signals. They send their
station names, and information about the type of programme
such as sport, music, etc.
When tuned to an RDS station, "RDS" and the station name will be
displayed.
"TP" (Traffic Programme) will appear on the display when the
received broadcast carries traffic information, and "TA" (Traffic
Announcement) will appear whilst a traffic information is on air.
"PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY
station is received.

 
You can control the RDS by using the buttons on the remote
control only.

When you are tuning in to a station other than an RDS station or to
an RDS station which sends weak signal, the display will change in
the following order:

 

Station name (PS)

Programme type (PTY)

Frequency

Radio text (RT)

NO PS

NO PTY

FM 98.80 MHz

NO RT