Sharp XL-MP40H User Manual / Operation Manual ▷ View online
05/2/8
XL-MP40H(E)3.fm
21
XL-MP40H
TINSEA052SJZZ
T
a
pe Rec
o
rding
Recording on a cassette tape
Before recording:
!
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
ensure that the desired material is properly recorded.
!
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
from malfunction of this unit.
!
The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
the recorded signal (Variable Sound Monitor).
!
For recording, use only normal tapes. Do not use metal or
CrO tapes.
CrO tapes.
!
Do not use C-120 tapes or poor-quality tapes, as they may cause
malfunctions.
malfunctions.
"
Recording from a disc
Erase-prevention tab of cassette tapes:
!
When recording on a cassette tape,
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent acciden-
tal recording or erasing.
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent acciden-
tal recording or erasing.
!
To protect the recorded sound, re-
move the tab after recording. Cover
the tab hole with adhesive tape to
record on the tape without the tab.
move the tab after recording. Cover
the tab hole with adhesive tape to
record on the tape without the tab.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "CD DISC" appears on
the display.
When operating with the remote control, press the CD button.
the display.
When operating with the remote control, press the CD button.
3
Load the desired disc.
4
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
5
Press the
button.
!
Recording will be paused.
!
On the remote control, press the SHIFT button and then the
button.
6
Press the
( ) button to start recording.
!
Playback of the disc will start in a few seconds after the tape
starts.
starts.
!
When the playback of the disc is finished or the end of the
tape is reached, the disc and the cassette will stop automat-
ically.
tape is reached, the disc and the cassette will stop automat-
ically.
Side A
Tab for
side B
side B
Tab for
side A
side A
6
05/2/8
XL-MP40H(E)3.fm
22
XL-MP40H
TINSEA052SJZZ
T
a
pe Rec
o
rding
Recording on a cassette tape (continued)
To perform programmed recording:
To stop recording:
Press the button.
Press the button.
Note:
If you use the remote control, make sure to press the SHIFT button
prior to pressing the
If you use the remote control, make sure to press the SHIFT button
prior to pressing the
button.
"
Recording from the radio
To stop recording:
Press the button.
Press the button.
To interrupt recording:
Press the
Press the
button.
To resume recording, press the
( ) button.
Beat cancel
A whistling noise may occur when recording an AM station. Elimi-
nate the noise as follows:
A whistling noise may occur when recording an AM station. Elimi-
nate the noise as follows:
Notes:
!
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
the AM loop aerial.
!
If you use the remote control, make sure to press the SHIFT but-
ton prior to pressing the
ton prior to pressing the
button.
"
Erasing recorded tapes
Note:
If you use the remote control, make sure to press the SHIFT button
prior to pressing the
If you use the remote control, make sure to press the SHIFT button
prior to pressing the
button.
1
Programme tracks (see page 17).
2
Press the
button.
3
Press the
( ) button to start recording.
1
Tune in to the desired station (see page 18).
2
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
performed.
3
Press the
button.
Recording will be paused.
4
Press the
( ) button to start recording.
1
Press the
button to pause recording.
2
Press the
button and select "TP REC A" or "TP REC B" for
better reception.
1
Load the tape to be erased into the cassette compartment with
the side to be erased facing toward you.
the side to be erased facing toward you.
2
Press the FUNCTION button until "TAPE" appears on the dis-
play.
When operating with the remote control, press the TAPE button.
play.
When operating with the remote control, press the TAPE button.
3
Press the
button.
4
Press the
( ) button to start erasing.
05/2/8
XL-MP40H(E)3.fm
23
XL-MP40H
TINSEA052SJZZ
Adv
a
nced F
eatures
Timer and sleep operation
This may be operated only with the remote control.
Timer playback:
The unit turns on and plays the desired source (disc, tuner, tape) at
a preset time.
The unit turns on and plays the desired source (disc, tuner, tape) at
a preset time.
Sleep operation:
The radio, disc or cassette tape can be turned off automatically.
The radio, disc or cassette tape can be turned off automatically.
Before setting timer:
"
Timer playback
Continued to the next page
1
Check that the clock is set to the correct time (refer to page 11).
2
Load a cassette or disc to be played.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD, TUNER (BAND) or TAPE button to select the
desired function.
When you selected the TUNER (BAND), tune in to the desired
station.
desired function.
When you selected the TUNER (BAND), tune in to the desired
station.
3
Adjust the volume using the VOLUME buttons.
Do not turn the volume up too high.
4
Press the SHIFT button and then the TIMER button. Within
6 seconds, press the SHIFT button and then the MEMORY
button.
6 seconds, press the SHIFT button and then the MEMORY
button.
5
Within 1 minute, press the PRESET ( or ) button to
specify the hour to start, then press the SHIFT button and
then the MEMORY button.
specify the hour to start, then press the SHIFT button and
then the MEMORY button.
6
Within 1 minute, press the PRESET ( or ) button to
specify the minutes to start, then press the SHIFT button
and then the MEMORY button.
specify the minutes to start, then press the SHIFT button
and then the MEMORY button.
!
The timer playback starting time, function, and volume will be
displayed, and then the unit will enter the stand-by mode au-
tomatically.
displayed, and then the unit will enter the stand-by mode au-
tomatically.
!
" " will appear and the current time will be displayed.
To cancel the timer playback:
Press the ON/STAND-BY button to turn the power on.
Press the ON/STAND-BY button to turn the power on.
7
05/2/8
XL-MP40H(E)3.fm
24
XL-MP40H
TINSEA052SJZZ
Adv
a
nced F
eatures
Timer and sleep operation (continued)
To reset or change the timer setting:
Perform "Timer playback" from the beginning.
Perform "Timer playback" from the beginning.
Note:
When performing timer playback using another unit connected to
the VIDEO/AUX IN sockets, select "VIDEO/AUX" in step 2. At this
time, only this unit will be turned on or enter the power stand-by
mode automatically. It will enter the power stand-by mode 1 hour
after the timer playback starts. However, the other unit will not be
turned on or off.
When performing timer playback using another unit connected to
the VIDEO/AUX IN sockets, select "VIDEO/AUX" in step 2. At this
time, only this unit will be turned on or enter the power stand-by
mode automatically. It will enter the power stand-by mode 1 hour
after the timer playback starts. However, the other unit will not be
turned on or off.
"
Sleep operation
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, press the SHIFT button and then the SLEEP button
until "OFF" appears on the display.
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, press the SHIFT button and then the SLEEP button
until "OFF" appears on the display.
To confirm the remaining sleep time:
Press the SHIFT button and then the SLEEP button once whilst the
sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
Press the SHIFT button and then the SLEEP button once whilst the
sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
7
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the volume
you were listening at before your system enters the timer stand-
by mode.
you were listening at before your system enters the timer stand-
by mode.
8
The unit will enter the stand-by mode one hour after the
timer playback starts. However, when disc or tape play-
back time is one hour or less, it will enter the stand-by
mode after completing playback.
timer playback starts. However, when disc or tape play-
back time is one hour or less, it will enter the stand-by
mode after completing playback.
1
Play back the desired sound source.
2
Press the SHIFT button and then the
SLEEP button.
SLEEP button.
To change the sleep time:
Time decreases as follows each time they are pressed.
The amount of sleep time can also be changed whilst in the
sleep mode.
sleep mode.
(Maximum: 3 hours - Minimum: 5 minutes)
3
Your system will enter the power stand-by mode automat-
ically after the preset time has elapsed.
ically after the preset time has elapsed.
The volume will turn down 40 seconds before the sleep opera-
tion finishes.
tion finishes.
3:00
2:00
1:30
1:00
10
15
30
5
OFF
Click on the first or last page to see other XL-MP40H service manuals if exist.