DOWNLOAD Sharp XL-MP40H Service Manual ↓ Size: 1.32 MB | Pages: 32 in PDF or view online for FREE

06/2/8

XL-MP40H(E)_FRONT.fm

TINSEA052SJZZ

XL-MP40H Micro Component System consisting of XL-MP40H (main
unit) and CP-MP40H (speaker system).

0301

05/2/8

XL-MP40H(E)1.fm

XL-MP40H

TINSEA052SJZZ

The mains lead of this product is fitted with a non-rewireable
(moulded) plug incorporating a 3A fuse. Should the fuse need to
be replaced, a BSI or ASTA approved BS 1362 fuse marked 

 or

 and of the same rating as above, which is also indicated on

the pin face of the plug must be used.

Always refit the fuse cover after replacing the fuse. Never use
the plug without the fuse cover fitted.

In the unlikely event of the socket outlet in your home not being
compatible with the plug supplied, cut-off the mains plug and fit
an appropriate type.

DANGER:
The fuse from the cut-off plug should be removed and the cut-off
plug destroyed immediately and disposed of in a safe manner.

Under no circumstances should the cut-off plug be inserted else-
where into a 13A socket outlet as a serious electric shock may
occur.
To fit an appropriate plug to the mains lead, follow the instruc-
tions below:

IMPORTANT:
The wires in the mains lead are coloured in accordance with the
following code:
Blue

: Neutral

Brown

: Live

As the colours of the wires in the mains lead of this product may
not correspond with the coloured markings identifying the termi-
nals in your plug, proceed as follows:

●

The wire which is coloured blue must be connected to the plug
terminal which is marked N or coloured black.

●

The wire which is coloured brown must be connected to the
plug terminal which is marked L or coloured red.

Ensure that neither the brown nor the blue wire is connected to
the earth terminal in your three pin plug.

Before replacing the plug cover, make sure that:

●

If the new fitted plug contains a fuse, its value is the same as
that removed from the cut-off plug.

●

The cord grip is clamped over the sheath of the mains lead
and not simply over the lead wires.

IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELEC-
TRICIAN.

SERVICE INFORMATION
In the unlikely event of your equipment requiring repair, please
contact the dealer or supplier from whom it was purchased. Where
this is not possible, please visit our web-site  www. sharp.co.uk/
customersupport.
Customers without internet access may telephone 08705
274277 during office hours (or (01) 676 0648 if telephoning
from lreland).
Please note; all calls will be charged at local rate.

Certain replacement parts and accessories may be obtained from
our main parts distributor.

WILLOW VALE ELECTRONICS LTD.

0121 766 5414

In the unlikely event of this equipment requiring repair during the
guarantee period, you will need to provide proof of the date of
purchase to the repairing company.
Please keep your invoice or receipt, which is supplied at the
time of purchase.

0301

05/2/8

XL-MP40H(E)1.fm

XL-MP40H

TINSEA052SJZZ

!

When the ON/STAND-BY button is set at STAND-BY position,
mains voltage is still present inside the unit. When the ON/
STAND-BY button is set at STAND-BY position, the unit may be
brought into operation by the timer mode or remote control.

!

This unit contains no user serviceable parts. Never remove cov-
ers unless qualified to do so. This unit contains dangerous volt-
ages, always remove mains plug from the socket before any
service operation and when not in use for a long period.

!

To prevent fire or shock hazard, do not expose this appliance to
dripping or splashing. No objects filled with liquids, such as
vases, shall be placed on the apparatus.

 
NOTES

!

Recording and playback of any material may require consent,
which SHARP is unable to give. Please refer particularly to the
provisions of the Copyright Act 1956, the Dramatic and Musical
Performers Protection Act 1958, the Performers Protection Acts
1963 and 1972 and to any subsequent statutory enactments and
orders.

!

This equipment complies with the requirements of Directives 89/
336/EEC and 73/23/EEC as amended by 93/68/EEC.

!

Supply of this product does not convey a license nor imply any
right to distribute content created with this product in revenue-
generating broadcast systems (terrestrial, satellite, cable and/or
other distribution channels), revenue-generating streaming appli-
cations (via Internet, intranets and/or other networks), other reve-
nue-generating content distribution systems (pay-audio or audio-
on-demand applications and the like) or on revenue-generating
physical media (compact discs, digital versatile discs, semicon-
ductor chips, hard drives, memory cards and the like). An inde-
pendent license for such use is required. For details, please visit
http://mp3licensing.com.

!

This product is classified as a CLASS 1 LASER product.

!

Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.

 

MPEG Layer-3 audio coding technology licensed from Fraunhofer 
IIS and Thomson.

As the laser beam used in this compact disc player is harmful to 
the eyes, do not attempt to disassemble the cabinet. Refer servic-
ing to qualified personnel only.

 

Laser Diode Properties
Material: GaAIAs
Wavelength: 780 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW

05/2/8

XL-MP40H(E)1.fm

XL-MP40H

TINSEA052SJZZ

Please confirm that the following accessories are included.

Caution:
Do not use the supplied AC power lead for other equipment. Fire or
electric shock may result.

Note:
Only the above accessories are included.

"

"

"

"

"

"

"

"

"