Sharp XL-MP35H (serv.man2) User Manual / Operation Manual ▷ View online
03/8/20
XL-MP35H(E)3.fm
21
XL-MP35H
TINSE0144SJZZ
T
a
pe Rec
o
rding
!
Recording from the radio
To stop recording:
Press the button.
Press the button.
To interrupt recording:
Press the
Press the
button.
To resume recording, press the
( ) button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
!
Erasing recorded tapes
1
Tune in to the desired station. (See page 17.)
2
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
performed.
3
Press the
button.
Recording will be paused.
4
Press the
( ) button to start re-
cording.
1
Load the tape to be erased into the cassette compartment with
the side to be erased facing toward you.
the side to be erased facing toward you.
2
Press the FUNCTION button until "TAPE" appears on the dis-
play.
When operating with the remote control, press the TAPE button.
play.
When operating with the remote control, press the TAPE button.
3
Press the
button.
4
Press the
( ) button to start erasing.
Erase-prevention tab of cassette tapes:
"
When recording on a cassette
tape, make sure that the erase-
prevention tabs are not re-
moved. Cassettes have remov-
able tabs that prevent
accidental recording or erasing.
tape, make sure that the erase-
prevention tabs are not re-
moved. Cassettes have remov-
able tabs that prevent
accidental recording or erasing.
"
To protect the recorded sound,
remove the tab after recording.
Cover the tab hole with adhe-
sive tape to record on the tape
without the tab.
remove the tab after recording.
Cover the tab hole with adhe-
sive tape to record on the tape
without the tab.
Side A
Tab for side B Tab for side A
7
03/8/20
XL-MP35H(E)3.fm
22
XL-MP35H
TINSE0144SJZZ
Adv
a
nced F
eatures
Timer and sleep operation
This may be operated only with the remote control.
Timer playback:
The unit turns on and plays the desired source (CD, MP3 disc,
tuner, tape) at the preset time.
The unit turns on and plays the desired source (CD, MP3 disc,
tuner, tape) at the preset time.
Sleep operation:
The radio, CD, MP3 disc and cassette tape can all be turned off
automatically.
The radio, CD, MP3 disc and cassette tape can all be turned off
automatically.
!
Timer playback
Before setting timer:
1
Press the CLOCK button to check that the clock is set to the
correct time. (Refer to page 11.)
correct time. (Refer to page 11.)
2
Load a cassette or disc to be played.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD, TUNER (BAND) or TAPE button to select the
desired function.
desired function.
When you select the TUNER (BAND), tune into the desired sta-
tion.
tion.
3
Adjust the volume using the VOLUME buttons.
Do not turn the volume up too high.
4
Press the TIMER button and within 3 seconds, press the
MEMORY button.
MEMORY button.
5
Within 30 seconds, press the PRESET ( or ) button to
specify the hour to start, then press the MEMORY button.
specify the hour to start, then press the MEMORY button.
03/8/20
XL-MP35H(E)3.fm
23
XL-MP35H
TINSE0144SJZZ
Adv
a
nced F
eatures
To reset or change the timer setting:
Perform "Timer playback" from the beginning.
Perform "Timer playback" from the beginning.
Note:
When performing timer playback using another unit connected to
the VIDEO/AUX IN sockets, select "VIDEO/AUX" in step 2. At this
time, only this unit will be turned on or enter the power stand-by
mode automatically. It will enter the power stand-by mode 1 hour
after the timer playback starts. However, the other unit will not be
turned on or off.
When performing timer playback using another unit connected to
the VIDEO/AUX IN sockets, select "VIDEO/AUX" in step 2. At this
time, only this unit will be turned on or enter the power stand-by
mode automatically. It will enter the power stand-by mode 1 hour
after the timer playback starts. However, the other unit will not be
turned on or off.
!
Sleep operation
To cancel the sleep operation:
Press the ON/STAND-BY button whilst the sleep timer is set.
Press the ON/STAND-BY button whilst the sleep timer is set.
To confirm the remaining sleep time:
Press the SLEEP button once whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
Press the SLEEP button once whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
6
Within 30 seconds, press the PRESET ( or ) button to
specify the minutes to start, then press the MEMORY but-
ton.
specify the minutes to start, then press the MEMORY but-
ton.
"
The timer playback starting time, function, and volume will be
displayed, and then the unit will enter the stand-by mode au-
tomatically.
displayed, and then the unit will enter the stand-by mode au-
tomatically.
"
" " will appear and the current time will be displayed.
To cancel the timer playback:
Press the ON/STAND-BY button to turn the power on.
7
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the volume
you were listening at before your system enters the timer stand-
by mode.
you were listening at before your system enters the timer stand-
by mode.
8
The unit will enter the stand-by mode one hour after the
timer playback starts.
timer playback starts.
1
Play back the desired sound source.
2
Press the SLEEP button and within 3 seconds, press the
MEMORY button.
MEMORY button.
To change the sleep time:
Whilst the sleep time is displayed, press the PRESET ( or )
button.
button.
(Maximum: 3 hours - Minimum: 5 minutes)
3
Within 30 seconds, press the MEMORY button.
4
Your system will enter the power stand-by mode automat-
ically after the preset time has elapsed.
ically after the preset time has elapsed.
The volume will turn down 30 seconds before the sleep opera-
tion finishes.
tion finishes.
3:00
2:00
1:30
1:00
0:10
0:15
0:30
0:05
(cancel)
8
03/8/20
XL-MP35H(E)3.fm
24
XL-MP35H
TINSE0144SJZZ
Adv
a
nced F
eatures
Timer and sleep operation (continued)
!
To use timer and sleep operation together
Example: To fall asleep and wake up to the same radio station
You can play back the same source only (the function cannot be
switched).
You can play back the same source only (the function cannot be
switched).
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.
Enhancing your system
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
able lead as shown below.
!
Listening to the playback sounds from VCR,
DVD, etc.
DVD, etc.
Note:
To prevent noise interference, place the unit away from the televi-
sion.
To prevent noise interference, place the unit away from the televi-
sion.
!
To record on a tape
1
Set the sleep time (steps 1 - 3, page 23).
2
Whilst the sleep timer is set, set the desired playback time
(steps 4 - 6, pages 22 - 23).
(steps 4 - 6, pages 22 - 23).
Sleep timer setting
Timer playback setting
Sleep operation will
automatically stop.
automatically stop.
Timer playback
start time
start time
5 minutes - 3 hours
1
Use a connection lead to connect the VCR, DVD, etc. to the VID-
EO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
EO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the FUNCTION button until "AUX" appears on the display.
When operating with the remote control, press the VIDEO/AUX
button.
When operating with the remote control, press the VIDEO/AUX
button.
4
Play the connected equipment.
1
Load a cassette into the cassette compartment with the side to
be recorded on facing you.
be recorded on facing you.
2
Press the VIDEO/AUX button.
3
Press the
button.
4
Press the
( ) button.
5
Play the VCR, DVD, etc.
VCR, DVD, etc.
White
Red
To the line output sockets
White
Red
RCA lead
(not supplied)
(not supplied)
Click on the first or last page to see other XL-MP35H (serv.man2) service manuals if exist.