Sharp XL-MP35H User Manual / Operation Manual ▷ View online
This Quick Start Guide will help you to correctly install and oper-
ate your system.
ate your system.
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without Internet access may telephone
08705 274277 during office hours (or (01) 676 0648
if telephoning from Ireland).
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without Internet access may telephone
08705 274277 during office hours (or (01) 676 0648
if telephoning from Ireland).
0301
1
Accessories
2
Remote control battery installation
1
Remove the battery cover.
2
Insert the batteries as shown.
3
Replace the cover.
Remote control
× 1
FM/AM loop aerial
× 1
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
Batteries are not included.
TINSE0145SJZZ
03J N HK 1
03J N HK 1
3
System connections
4
Turning on your system
Press the ON/STAND-BY button to turn
the power on.
the power on.
AC power lead
× 1
MODEL
XL-MP35H
MICRO COMPONENT SYSTEM
Left speaker
AM loop aerial
Wall socket
(AC 230 V, 50 Hz)
(AC 230 V, 50 Hz)
FM aerial
Right speaker
Left speaker
Plain
White line
Right speaker
To the line
output sockets
output sockets
RCA lead
(not supplied)
(not supplied)
VCR, DVD, etc.
TV
XL-MP35HE_QG.pm
03.9.2, 1:46 PM
1
Listening to a CD or MP3 disc
1
Press the FUNCTION button until “CD” appears on the dis-
play.
play.
2
Press the CD EJECT button to open the disc compart-
ment.
ment.
3
Place a disc on the spindle, label side up.
4
Close the disc compartment by firmly pushing the corner
marked “PUSH CLOSE”.
marked “PUSH CLOSE”.
5
Press the
button to start playback from track 1.
PUSH
CLOSE
CLOSE
Listening to the radio
1
Press the FUNCTION button until “FM” or “AM” appears on
the display.
the display.
2
Press the TUNING (
or
) button to tune in to the desired
station.
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
To receive an FM stereo transmission:
Press the FUNCTION button to display the “ST” indicator.
Press the FUNCTION button to display the “ST” indicator.
● “ ” will appear when an FM broadcast is in stereo.
FM stereo mode indicator
FM stereo receiving indicator
Listening to a cassette tape
1
Press the FUNCTION button until “TAPE” appears on the
display.
display.
2
Open the cassette compartment by pushing the area marked
“PUSH EJECT ”.
“PUSH EJECT ”.
3
Load a cassette into the cassette com-
partment with the side to be played
facing toward you.
partment with the side to be played
facing toward you.
4
Close the cassette compartment by pushing the area marked
“PUSH EJECT ”.
“PUSH EJECT ”.
5
Press the
button to start playback.
■
If trouble occurs
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on
1. Set the unit to the stand-by mode and turn the power on
again.
plug and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory
by resetting it.
by resetting it.
■
Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power stand-
by mode.
2. Whilst pressing down the MEMORY/SET button and the
button, press the ON/STAND-BY button until “CLEAR”
appears.
Caution:
■
Maintenance
Routine maintenance is required for continued optimum perfor-
mance, refer to the operation manual (page 26).
mance, refer to the operation manual (page 26).
XL-MP35HE_QG.pm
03.9.2, 1:46 PM
2
Display