DOWNLOAD Sharp XL-MP110E Service Manual ↓ Size: 2.4 MB | Pages: 40 in PDF or view online for FREE

 

03/12/17

XL-MP110EE 28-38.fm

 

XL-MP110E

 

The connection lead is not included. Purchase a commercially avail-
able lead as shown below.

 

 

When you press any of the following buttons, the unit turns on.

  

VIDEO/AUX button (main unit and remote control): The unit turns
on and the "VIDEO" function is activated.

  

 /   button on the main unit: The unit turns on and playback of

the last function starts (CD, TAPE, TUNER, VIDEO/AUX).

  

 

To prevent noise interference, place the unit away from the televi-
sion.
 

  

 

 

  

  

Before plugging in or unplugging the headphones, reduce the vol-
ume.

  

Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended imped-
ance is 32 ohms.

  

Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.

To the line
output socket

 

When using video equipment, connect the audio output to this 
unit and the video output to a television.

 

03/12/17

XL-MP110EE 28-38.fm

 

XL-MP110E

  

 

When a commercially available speaker with a built-in amplifier is
connected to this unit, you can enjoy sound with emphasised bass.
Connect an RCA lead from a commercially available speaker with a
built-in amplifier to the SUBWOOFER PRE-OUT socket.

 

Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.

  

 

 

  

Speaker with a 

built-in amplifier

  

The clock is not set to the 
correct time.

  

Did a power failure occur? Reset 
the clock. 

  

When a button is pressed, 
the unit does not respond.

  

Set the unit to the power stand-
by mode and then turn it back on.

  

If the unit still malfunctions, reset 
it. 

  

No sound is heard.

Is the volume level set to "0"?

Are the headphones connected?

Are the speaker wires discon-
nected?

Playback does not start.

Is the disc loaded upside down?

Playback stops in the mid-
dle or is not performed 
properly.

Does the disc satisfy the stan-
dards?

Is the disc distorted or 
scratched?

Playback sounds are 
skipped, or stopped in the 
middle of a track.

Is the unit located near excessive 
vibrations?

Is the disc very dirty?

Has condensation formed inside 
the unit?

03/12/17

XL-MP110EE 28-38.fm

XL-MP110E

 

 

Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
 

Cannot record.

Is the erase-prevention tab re-
moved?

Cannot record tracks with 
proper sound quality.

Is it a normal tape? (You cannot 
record on a metal or CrO  tape.)

Cannot erase completely.

Sound skipping.

Is there any slack?

Is the tape stretched?

Cannot hear treble.

Are the capstans, pinch rollers, 
or heads dirty?

Sound fluctuation.

Cannot remove the tape.

If a power failure occurs during 
playback, the heads remain en-
gaged with the tape. Do not open 
the compartment with great 
force.

The remote control does 
not operate.

Is the AC power lead of the unit 
plugged in?

Is the battery polarity correct?

Are the batteries dead?

Is the distance or angle incor-
rect?

Does the remote control sensor 
receive strong light?

The radio makes unusual 
noises continuously.

Is the unit placed near the TV or 
computer?

Is the FM aerial or AM loop aerial 
placed properly? Move the aerial  
away from the AC power lead if 
it's located nearby.

03/12/17

XL-MP110EE 28-38.fm

XL-MP110E

When this product is subjected to strong external interference (me-
chanical shock, excessive static electricity, abnormal supply voltage
due to lightning, etc.) or if it is operated incorrectly, it may malfunc-
tion.
If such a problem occurs, do the following:
1

Set the unit to the stand-by mode and turn the power on again.

2

If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.

Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
 

1

Press the ON/STAND-BY button to enter the power stand-by
mode.

2

Whilst pressing down the 

 button and the X-BASS/DEMO but-

ton, press the TUNING   button until "CLEAR AL" appears.

 
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
 

Remove all CDs from the unit. Make sure there is no CD in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the
unit with discs left inside can damage the unit.
 

Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.

Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
Keep your discs away from direct sunlight, heat, and excessive
moisture.
Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.