Sharp XL-MP110E User Manual / Operation Manual ▷ View online
03/12/17
XL-MP110EE 22-27.fm
25
XL-MP110E
Tape Playback
Listening to a cassette tape
Tape playback
Auto power on function:
When you press any of the following buttons, the unit turns on.
TAPE button (main unit and remote control): The unit turns on and
the "TAPE" function is activated.
the "TAPE" function is activated.
TAPE button on the remote control: The unit turns on and play-
back starts (regardless of the last function).
back starts (regardless of the last function).
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, VIDEO/AUX).
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
mode after 15 minutes of inactivity.
Before playback:
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
the best sound. (Metal or CrO tapes are not rec-
ommended.)
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
they may cause malfunctions.
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
tighten the slack with a pen or a pencil.
/
/
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE button.
3
Open the cassette door by push-
ing the area marked " PUSH
EJECT".
ing the area marked " PUSH
EJECT".
4
Load a cassette into the cas-
sette compartment with the side
to be played on facing you.
sette compartment with the side
to be played on facing you.
5
Press the / (TAPE ) button.
Tape Play indicator
03/12/17
XL-MP110EE 22-27.fm
26
XL-MP110E
Tape Recording
Listening to a cassette tape (continued)
Various tape functions
Caution:
To remove the cassette, press the (TAPE ) button, and then
open the compartment.
open the compartment.
If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not open.
In this case, wait until the power is restored.
remain engaged with the tape and the cassette door will not open.
In this case, wait until the power is restored.
Recording on a cassette tape
Function
Main unit
Remote
control
Operation
Playback
Press in the stop
mode.
mode.
Stop
Press in the playback,
fast forward or rewind
mode.
fast forward or rewind
mode.
Fast for-
ward/
Rewind
ward/
Rewind
Press in the playback
or stop mode.
or stop mode.
Before recording:
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
ensure that the desired material is properly recorded.
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
from malfunction of this unit.
The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
on the recorded signal (Variable Sound Monitor).
For recording, use only normal tapes. Do not use metal or
CrO tapes.
CrO tapes.
Erase-prevention tab of cassette tapes:
When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Side A
Tab for side B
Tab for side A
03/12/17
XL-MP110EE 22-27.fm
27
XL-MP110E
Tape Recording
Recording from a CD or MP3/WMA disc
You can record the desired disc using the CD DIRECT PLAY button.
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
The disc and tape will stop.
/
RRMCGA041AWSA
/
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
performed.
4
Press the
button.
Recording will be paused.
5
Press one of the 1 - 5 buttons to select the desired disc.
6
Within 5 seconds, press the CD DIRECT PLAY button to
start recording.
start recording.
Recording is started from the selected disc. When the play-
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
Playback of the disc will start approximately 7 seconds after
the tape starts.
the tape starts.
03/12/17
XL-MP110EE 28-38.fm
28
XL-MP110E
Tape Recording
Recording on a cassette tape (continued)
Recording from several CDs continuously:
To perform programmed recording:
To stop recording:
Press the (TAPE ) button.
The CD and tape will stop.
Press the (TAPE ) button.
The CD and tape will stop.
Recording from the radio
To interrupt recording:
Press the
button.
To resume recording, press the / (TAPE ) button.
To stop recording:
Press the (TAPE ) button.
Note:
If you hear a whistling noise whilst recording an AM station, move the
AM loop aerial.
AM loop aerial.
Erasing recorded tapes
1
Press the TAPE button.
2
Follow steps 2 - 4 in "Recording from the radio".
1 Perform steps 1 - 5 in "Recording from a CD or MP3/WMA disc"
on page 27.
2 Within 5 seconds, press the / (TAPE ) button to start record-
ing.
1 Programme discs and tracks (see page 22).
2 Press the
2 Press the
button.
3 Press the / (TAPE ) button to start recording.
1
Tune in to the desired station (see page 23).
2
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
performed.
3
Press the
button.
Recording will be paused.
4
Press the / (TAPE ) button to start recording.
Click on the first or last page to see other XL-MP110E service manuals if exist.