Sharp XL-MP10H User Manual / Operation Manual ▷ View online
05/3/23
XL-MP10H(E)2.fm
17
TINSEA034SJZZ
XL-MP10H
Disc Playbac
k
"
Programmed play
You can choose up to 32 selections for playback in the order you like.
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the CD to the stop mode
and then press the CLEAR button.
Each time the button is pressed, one track will be cleared, beginning
with the last track programmed. When all the tracks are cleared,
"MEMORY" will disappear.
Whilst the "MEMORY" indicator is lit, set the CD to the stop mode
and then press the CLEAR button.
Each time the button is pressed, one track will be cleared, beginning
with the last track programmed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 2 to add tracks. The new
tracks will be stored after the last track of the original programme.
If a programme has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 2 to add tracks. The new
tracks will be stored after the last track of the original programme.
Notes:
!
Opening the disc compartment automatically cancels the pro-
grammed sequence.
grammed sequence.
!
If you press the ON/STAND-BY button to enter the stand-by mode
or change the function from CD to another, the programmed se-
lections will not be cleared.
or change the function from CD to another, the programmed se-
lections will not be cleared.
!
During the programme operation, random play is not possible.
!
For CD-R/RW discs recorded in the MP3 or WMA format, you
can select the track number but cannot select the folder by press-
ing the direct search buttons.
can select the track number but cannot select the folder by press-
ing the direct search buttons.
1
Whilst in the stop mode, use the
direct search buttons to select the
desired track.
direct search buttons to select the
desired track.
Selected track number
You can also select a track by pressing the
or
button.
2
Press the MEMORY (MEMORY/
SET) button to save the track
number.
SET) button to save the track
number.
Playback order
When the track is memorised, "MEMORY" will appear.
3
Repeat steps 1 - 2 for other tracks. Up to 32 tracks can be
programmed.
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
by pressing the CLEAR button.
4
Press the (
) button to start playback.
4
05/3/23
XL-MP10H(E)2.fm
18
TINSEA034SJZZ
XL-MP10H
Radio
Listening to the radio
Notes:
!
When radio interference occurs, auto scan tuning may stop auto-
matically at that point.
matically at that point.
!
Auto scan tuning will skip weak signal stations.
!
To stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
Press the FUNCTION [TUNER (BAND)] button to display the "ST" in-
dicator.
Press the FUNCTION [TUNER (BAND)] button to display the "ST" in-
dicator.
!
" " will appear when an FM broadcast is in stereo.
!
If the FM reception is weak, press the FUNCTION [TUNER
(BAND)] button to extinguish the "ST" indicator. The reception
changes to monaural, and the sound becomes clearer.
(BAND)] button to extinguish the "ST" indicator. The reception
changes to monaural, and the sound becomes clearer.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "FM" or "AM" appears on
the display.
When operating with the remote control, press the TUNER
(BAND) button to select "FM" or "AM".
the display.
When operating with the remote control, press the TUNER
(BAND) button to select "FM" or "AM".
3
Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
FM stereo mode indicator
FM stereo receiving indicator
05/3/23
XL-MP10H(E)2.fm
19
TINSEA034SJZZ
XL-MP10H
Radio
Listening to the memorised station
"
Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
the push of a button. (Preset tuning)
Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead disconnection.
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead disconnection.
"
To recall a memorised station
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
select the desired station.
To select a preset station with the direct number buttons:
Press the corresponding number ("0" - "+10").
Press the corresponding number ("0" - "+10").
Example:
To select 28, press "+10", "+10" and "8".
To select 28, press "+10", "+10" and "8".
"
To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset
memory scan)
memory scan)
"
To clear a memorised station
"
To erase entire preset memory
1
Perform steps 1 - 3 in "Listening to the radio" on page 18.
2
Press the MEMORY/SET (MEMO-
RY) button to enter the preset tun-
ing saving mode.
RY) button to enter the preset tun-
ing saving mode.
3
Within 5 seconds, press the PRE-
SET ( or ) button to select the
preset channel number.
SET ( or ) button to select the
preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 5 seconds, press the MEM-
ORY/SET (MEMORY) button to
store that station in memory.
ORY/SET (MEMORY) button to
store that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
memorised will be erased.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the desired sta-
tion is located.
tion is located.
1
Recall the memorised station.
2
Whilst it is displayed, press the
MEMORY/SET (MEMORY) button.
MEMORY/SET (MEMORY) button.
3
Within 5 seconds, press the CLEAR
button on the remote control.
button on the remote control.
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
mode.
2
Whilst pressing down the MEMORY/SET button and the PRE-
SET button, press the ON/STAND-BY button until "TUCL" ap-
pears.
SET button, press the ON/STAND-BY button until "TUCL" ap-
pears.
5
05/3/23
XL-MP10H(E)2.fm
20
TINSEA034SJZZ
XL-MP10H
Tape Playbac
k
Listening to a cassette tape
Before playback:
To stop playback:
Press the button.
Press the button.
Fast forward/rewind:
To advance the tape, press the button, then press the
To advance the tape, press the button, then press the
but-
ton. To rewind, press the button, then press the
button.
To interrupt playback:
Press the button during playback.
Press the button again to resume playback.
Press the button during playback.
Press the button again to resume playback.
Caution:
!
Do not press the button whilst the fast forward or rewind opera-
tions are in progress. The
tions are in progress. The
or
button will not be released
when the tape end is reached. Once this occurs, press the
button.
button.
!
Before changing from one tape operation to another, press the
button.
!
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
the best sound. (Metal or CrO tapes are not rec-
ommended.)
!
Do not use C-120 tapes or poor-quality tapes, as they
may cause malfunctions.
may cause malfunctions.
!
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
tighten the slack with a pen or a pencil.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "TAPE" appears on the
display.
display.
When operating with the remote control, press the TAPE but-
ton.
ton.
3
Press the button to open the cassette compartment.
4
Load a cassette into the cas-
sette compartment with the
side to be played facing to-
ward you.
sette compartment with the
side to be played facing to-
ward you.
5
Close the cassette compartment.
6
Press the button to start playback.
Click on the first or last page to see other XL-MP10H service manuals if exist.