Sharp XL-HP535 User Manual / Operation Manual ▷ View online
03/12/15
XL-HP535E(E)3.fm
25
XL-HP535E
TINSEA030AWZZ
Radio
!
Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
the push of a button. (Preset tuning)
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead discon-
nection.
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead discon-
nection.
!
To recall a memorised station
!
To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
set memory scan)
!
To erase entire preset memory
1
Perform steps 1 - 3 in "Tuning" on page 24.
2
Press the MEMORY/SET (MEMORY) button to enter the
preset tuning saving mode.
preset tuning saving mode.
3
Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 30 seconds, press the MEMORY/SET (MEMORY)
button to store that station in memory.
button to store that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
memorised will be erased.
Press the PRESET ( or ) button for less than 0.5 seconds to se-
lect the desired station.
lect the desired station.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the desired sta-
tion is located.
tion is located.
1
Press the ON/STAND-BY button to enter the stand-by mode.
2
Whilst pressing down the
button and the X-BASS/DEMO but-
ton, press the CLOCK/TIMER button until "TUNER CL" appears.
5
03/12/15
XL-HP535E(E)3.fm
26
XL-HP535E
TINSEA030AWZZ
Tape Playbac
k
Listening to a cassette tape
!
Tape playback
Auto power on function:
When you press any of the following buttons, the unit turns on.
When you press any of the following buttons, the unit turns on.
"
TAPE button (main unit and remote control): The unit turns on
and the "TAPE" function is activated.
and the "TAPE" function is activated.
"
TAPE button on the remote control: The unit turns on and side
A playback starts (regardless of the last function).
A playback starts (regardless of the last function).
"
/ button on the main unit: The unit turns on and playback of
the last function starts (CD/TAPE/TUNER/VIDEO).
Before playback:
"
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
the best sound. (Metal or CrO tapes are not rec-
ommended.)
"
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
they may cause malfunctions.
"
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
tighten the slack with a pen or a pencil.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE button.
3
Open the cassette door by push-
ing the area marked " PUSH
EJECT".
ing the area marked " PUSH
EJECT".
4
Load a cassette into the cas-
sette compartment with side A
facing you.
sette compartment with side A
facing you.
5
Press the
button to choose one side or both
sides.
...
To listen to both sides.
To play both sides (
), start from side A. When playback starts
from side B, side A will not be played.
...
For endless repeat play of both sides.
...
To listen to one side.
6
Press the / ( ) button to listen to side A, or the ( )
button for side B.
button for side B.
Forward play
Reverse play
03/12/15
XL-HP535E(E)3.fm
27
XL-HP535E
TINSEA030AWZZ
Tape
Recordi
n
g
!
Various tape functions
Caution:
"
To remove the cassette, press the (TAPE ) button, and then
open the compartment.
open the compartment.
"
If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
Recording on a cassette tape
Function
Main unit
Remote
control
Operation
Side A play-
back
back
Press in the stop
mode.
mode.
Side B play-
back
back
Press in the stop
mode.
mode.
Stop
Press in the playback,
fast forward or fast re-
wind mode.
fast forward or fast re-
wind mode.
Fast for-
ward/Fast
rewind
ward/Fast
rewind
Press in the playback
or stop mode.
or stop mode.
Before recording:
"
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
ensure that the desired material is properly recorded.
"
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
from malfunction of this unit.
"
The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
on the recorded signal (Variable Sound Monitor).
"
For recording, use only normal tapes. Do not use metal or
CrO tapes.
CrO tapes.
Erase-prevention tab of cassette tapes:
"
When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
"
To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Side A
Tab for side B
Tab for side A
6
03/12/15
XL-HP535E(E)3.fm
28
XL-HP535E
TINSEA030AWZZ
Tape
Recordi
n
g
Recording on a cassette tape (continued)
!
Recording from a CD or MP3 disc
You can record the desired disc using the CD DIRECT PLAY but-
ton.
ton.
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
Press the (TAPE ) button.
The disc and tape will stop.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Load a cassette into the cassette compartment with side A
facing you.
facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
performed.
4
Press the
button to choose one side or both sides.
...
To record on both sides.
...
To record on only one
side.
side.
5
Press the
button.
Recording will be paused.
6
Press one of the 1 - 5 buttons to select the desired disc.
7
Within 5 seconds, press the CD DIRECT PLAY button to
start recording.
start recording.
"
Recording starts from side A.
"
Recording is started from the selected disc. When the play-
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
"
Playback of the disc will start approximately 7 seconds after
the tape starts.
the tape starts.
Click on the first or last page to see other XL-HP535 service manuals if exist.