Sharp XL-HP535 User Manual / Operation Manual ▷ View online
03/12/15
XL-HP535E(E)2.fm
13
XL-HP535E
TINSEA030AWZZ
Basic
Operati
o
n
Setting the clock
In this example, the clock is set for the 24-hour (0:00) display.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the
Press the CLOCK/TIMER button.
Within 10 seconds, press the
or
button to display the time.
The time display will appear for about 10 seconds.
Note:
The "CLOCK" will appear or time will flash to confirm the time dis-
play when the AC power supply is restored after a power failure or
unplugging the unit. If incorrect, readjust the clock as follows.
The "CLOCK" will appear or time will flash to confirm the time dis-
play when the AC power supply is restored after a power failure or
unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" does not
appear in step 3, step 4 (for selecting the 24-hour or 12-hour dis-
play) will be skipped.
Perform "Setting the clock" from step 1. If the "CLOCK" does not
appear in step 3, step 4 (for selecting the 24-hour or 12-hour dis-
play) will be skipped.
To change the 24-hour or 12-hour display:
Note:
The clock can also be set with the remote control.
The clock can also be set with the remote control.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
button to se-
lect "CLOCK", and press the MEMORY/SET button.
4
Press the
or
button to select 24-hour or 12-
hour display and then press the MEMORY/SET button.
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
"AM 0:00"
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
5
Press the
or
button to adjust the hour and
then press the MEMORY/SET button.
Press the
or
button once to advance the time by
1 hour. Hold it down to advance continuously.
6
Press the
or
button to adjust the minutes and
then press the MEMORY/SET button.
Press the
or
button once to advance the time by
1 minute. Hold it down to change the time in 5-minute intervals.
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 37 for details.]
memory (reset)" on page 37 for details.]
2
Perform "Setting the clock" from step 1.
XL-HP535E(E) TINSEA030AWZZ
3
3
03/12/15
XL-HP535E(E)2.fm
14
XL-HP535E
TINSEA030AWZZ
CD
or MP3
disc Pla
y
back
Listening to a CD or MP3 disc
This system can also play audio CD-R and CD-RW discs, but can-
not record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.
not record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
Notes:
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
Notes:
"
"
" indicator will light up after the unit reads information on an
MP3 disc.
"
This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
VBR files.
"
During VBR file playback, time counter in the display may differ
from its actual playback time.
from its actual playback time.
Auto power on function:
When you press any of the following buttons, the unit turns on.
"
CD button (main unit and remote control): The unit turns on and
the "CD" function is activated.
the "CD" function is activated.
"
CD / button on the remote control: The unit turns on and CD
playback starts (regardless of the last function).
playback starts (regardless of the last function).
"
/ button on the main unit: The unit turns on and playback of
the last function starts (CD/TAPE/TUNER/VIDEO).
03/12/15
XL-HP535E(E)2.fm
15
XL-HP535E
TINSEA030AWZZ
CD
or MP3
disc Pla
y
back
"
Playback will begin from track 1 on the DISC 1. After that disc fin-
ishes playing, the next disc will automatically play.
ishes playing, the next disc will automatically play.
"
After the last track on the fifth disc is played, the unit will stop
automatically.
automatically.
"
When there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.
tray will be skipped to the next tray with a disc.
To exchange other discs whilst playing a disc:
Press one of the 1 - 5 buttons for the stopped disc and within 5
seconds, press the OPEN/CLOSE button and exchange discs.
Press one of the 1 - 5 buttons for the stopped disc and within 5
seconds, press the OPEN/CLOSE button and exchange discs.
To remove the discs:
In the stop mode, press the 1 - 5 button and within 5 seconds,
press the OPEN/CLOSE button.
In the stop mode, press the 1 - 5 button and within 5 seconds,
press the OPEN/CLOSE button.
Caution:
"
Do not place two discs in one disc tray.
"
Do not play discs with special shapes (heart- or octagon-
shaped). It may cause malfunctions.
shaped). It may cause malfunctions.
"
Do not push the disc tray whilst it is moving.
"
If the power fails whilst the tray is open, wait until the power is
restored.
restored.
"
If the disc tray is stopped with force, "ER-CD20" will appear on
the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
"
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
unit away from the TV or radio.
"
If a disc is damaged, dirty, or loaded upside down, the disc will
skip.
skip.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the 1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
OPEN/CLOSE button to open the disc tray 1.
4
Place the disc on the disc tray 1, label side up.
Be sure to place 8 cm (3") disc in the middle of the disc trays.
5
Press the OPEN/CLOSE button to close the disc tray 1.
"
Due to the structure of its disc information, it takes longer to
read an MP3 disc than a normal CD (approximately 20 to 90
seconds).
read an MP3 disc than a normal CD (approximately 20 to 90
seconds).
6
You can place discs on the trays 2 - 5 by following steps 3
- 5.
- 5.
7
Press the / button to start playback.
12 cm (5")
8 cm (3")
[CD]
Total number of
tracks on the disc
whose number
is flashing
tracks on the disc
whose number
is flashing
Total playing
time of the disc
whose number
is flashing
time of the disc
whose number
is flashing
Total number
of folders
of folders
Total number
of files
of files
MP3 disc indicator
[MP3]
Disc play indicator
4
03/12/15
XL-HP535E(E)2.fm
16
XL-HP535E
TINSEA030AWZZ
CD
or MP3
disc Pla
y
back
Listening to a CD or MP3 disc (continued)
!
Various disc functions
Notes:
"
Track up/track down is possible only within individual discs.
"
The sound is heard during fast forward/fast reverse with a CD,
but not with an MP3 disc. For fast forward or fast reverse of an
MP3 disc, refer to playback time on the display.
but not with an MP3 disc. For fast forward or fast reverse of an
MP3 disc, refer to playback time on the display.
Notes for CD:
Notes for MP3 discs:
"
Fast forward/fast reverse is possible only within individual tracks.
"
When the end of the track is reached during fast forward, the next
track will be played. Playback of the track will begin when its
beginning is reached during fast reverse.
track will be played. Playback of the track will begin when its
beginning is reached during fast reverse.
!
To change the display (MP3 discs only)
Function
Main unit
Remote
control
Operation
Play
Press in the stop
mode.
mode.
Stop
Press in the playback
mode.
mode.
Pause
Press in the playback
mode. Press the /
button to resume play-
back from the paused
point.
mode. Press the /
button to resume play-
back from the paused
point.
Track up/
Track down
Track down
Press in the playback
or stop mode.
or stop mode.
If you press the button
in the stop mode,
press the / button
to start the desired
track.
in the stop mode,
press the / button
to start the desired
track.
Fast for-
ward/Fast
reverse
ward/Fast
reverse
Press and hold down
in the playback mode.
in the playback mode.
Release the button to
resume playback.
resume playback.
"
Fast forward/fast reverse is possible only within individual discs.
"
When the end of the last track is reached during fast forward, "
END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast re-
verse, the unit will enter the playback mode.
( : Last track number)
END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast re-
verse, the unit will enter the playback mode.
( : Last track number)
Whilst a disc is playing, press the MP3 DIS-
PLAY button.
Each time the button is pressed, the display
will change as follows.
PLAY button.
Each time the button is pressed, the display
will change as follows.
Folder name
File name
Track number
Elapsed
playback time
playback time
Click on the first or last page to see other XL-HP535 service manuals if exist.