DOWNLOAD Sharp XL-DV50 Service Manual ↓ Size: 3.71 MB | Pages: 65 in PDF or view online for FREE

8

7

6

5

4

3

2

1

04/3/19

XL-DV50H(H)_E.fm

XL-DV50H

TINSZA007SJZZ

"

 

"

Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet
(laser pickup, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc in the unit until normal playback is
possible (about 1 hour). Wipe off any condensation on the transmit-
ter with a soft cloth before operating the unit.

"

When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.

 

If such a problem occurs, do the following:
1

Set the unit to the stand-by mode and turn the power on again.

2

If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.

 

Note:
If neither operation above restores the unit, clear all the memory by
resetting it.

 

"

1

Press the ON/STAND-BY button to enter the power stand-by
mode.

2

Whilst pressing down the DVD/CD button and the  2 button,
press the ON/STAND-BY button until "CLEAR" appears.

Caution:
When you reset, all data is deleted and the settings return to the
default. (DVD initial settings are retained.)

 

"

Remove all discs from the unit. Make sure there is no disc in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the
unit with discs left inside can damage the unit.

 
 

When you load an unplayable disc or fail to perform operations prop-
erly, the following messages are displayed on the TV screen.

The radio makes 
unusual noises 
continuously.

Is the unit placed near the TV or computer?

Is the FM aerial or AM loop aerial placed properly? 
Move the aerial away from the AC power lead if it's 
located nearby.

The disc cannot be played with this 
system or it is loaded in an incor-
rect way.

The region number of the DVD is 
neither "2" nor "ALL".

The disc does not support the oper-
ation described in this operation 
manual.

Disc Error

Wrong Region

04/3/19

XL-DV50H(H)_E.fm

TINSZA007SJZZ

XL-DV50H

!

Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.

"

Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.

"

Do not apply oil to the inside of the unit. It may cause malfunc-
tions.

 

!

Discs are fairly resistant to damage, however mistracking can occur
due to an accumulation of dirt on the disc surface. Follow the guide-
lines below for maximum enjoyment from your disc collection and
player.

"

Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.

"

Keep your discs away from direct sunlight, heat, and excessive
moisture.

"

Always hold the discs by the edges. Fingerprints, dirt, or water on
the discs can cause noise or mistracking. If a disc is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.

 

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.

 

!

 

!

AC 230 V, 50 Hz

Power consumption Power on: 98 W

Power stand-by: 0.6 W (*)

Width: 160 mm (6-5/16") 
Height: 240 mm (9-7/16") 
Depth: 300 mm (11-13/16")

6.0 kg (13.2 lbs.)

(*) This power consumption value is obtained when the demonstra-

tion mode is cancelled in the power stand-by mode. Refer to page 
15 to cancel the demonstration mode.

Front speakers:

PMPO: 180 W

MPO: 90 W (45 W + 45 W) (DIN 45 324)

RMS: 60 W (30 W + 30 W) (DIN 45 324)

RMS: 45 W (22.5 W + 22.5 W) (DIN 45 500)

Subwoofer:

PMPO: 120 W

MPO: 60 W (DIN 45 324)

RMS: 40 W (DIN 45 324)

RMS: 30 W (DIN 45 500)

8

7

6

5

4

3

2

1

04/3/19

XL-DV50H(H)_E.fm

XL-DV50H

TINSZA007SJZZ

 

"

 

"

 

"

 

"

Front speakers and subwoofer: 6 ohms

Headphones: 16 - 50 ohms                         
(recommended: 32 ohms)

Optical digital output: Square type   1

Video/Auxiliary (audio signal):                     
500 mV/47 k ohms

SCART output: SCART terminal   1

Video output: RCA type   1

S-video output: S-terminal   1

5-disc multi-play compact disc player

PAL/NTSC colour

DVD (region number 2, ALL), video CD,  
audio CD, CD-R, CD-RW

Horizontal resolution: 500 lines

S/N ratio: 75 dB

Linear PCM DVD:                
30 Hz to 20 kHz              
(sampling rate: 48 kHz)

30 Hz to 20 kHz                 
(sampling rate: 96 kHz)

CD: 30 Hz to 20 kHz

CD: 95 dB (1 kHz)

Linear PCM DVD: 92 dB

CD: 92 dB

0.14 %

FM: 87.5 - 108 MHz

AM: 522 - 1,620 kHz

2-way type speaker system                       
(magnetic shield)

4 cm (1.5") tweeter

10 cm (4") woofer

60 W

30 W

6 ohms

Width: 165 mm (6-1/2") 
Height: 240 mm (9-7/16") 
Depth: 265 mm (10-7/16")

2.5 kg (5.5 lbs.)/each

15 cm (6") subwoofer system                     
(magnetic shield)

80 W

40 W

6 ohms

Width: 160 mm (6-5/16") 
Height: 240 mm (9-7/16") 
Depth: 270 mm (10-5/8")

2.9 kg (6.4 lbs.)/each

03/8/20

XL-DV50H(H)_BACK.fm

TINSZA007SJZZ

TINSZA007SJZZ
04C N HK  1

0401_A5