Sharp XL-DV50 User Manual / Operation Manual ▷ View online
8
7
6
5
4
3
2
1
04/3/19
XL-DV50H(H)_E.fm
E-42
ENGLISH
XL-DV50H
TINSZA007SJZZ
Radio
To stop the ASPM operation before it is complete:
Press the ASPM button whilst it is scanning for stations.
The stations which are already stored in memory will be kept there.
Press the ASPM button whilst it is scanning for stations.
The stations which are already stored in memory will be kept there.
Notes:
!
Any station which has the same frequency as one stored in mem-
ory will not be stored.
ory will not be stored.
!
If 40 stations have already been stored in memory, the scan will
be aborted. If you want to redo the ASPM operation, erase the
preset memory.
be aborted. If you want to redo the ASPM operation, erase the
preset memory.
!
If no stations have been stored in memory, "END" will appear for
about 4 seconds.
about 4 seconds.
!
If the RDS signals are very weak, station names may not be
stored in memory.
stored in memory.
To erase all of the contents of preset memory:
!
After performing this operation, all of the preset memory informa-
tion will be erased.
tion will be erased.
To store a station name again if the wrong name was stored in
memory:
It may be impossible to store station names in memory using the
ASPM function if there is lots of noise or if the signal is too weak. In
this case, perform as follows.
memory:
It may be impossible to store station names in memory using the
ASPM function if there is lots of noise or if the signal is too weak. In
this case, perform as follows.
Notes:
!
The same station name can be stored in different channels.
!
In a certain area or during certain time periods, the station names
may temporarily be different.
may temporarily be different.
"
Notes for RDS operation
If any of the following events occur, it does not mean that the
unit is faulty:
unit is faulty:
!
"PS", "NO PS" and a station name appear alternately, and the
unit does not operate properly.
unit does not operate properly.
!
If a particular station is not broadcasting properly or a station is
conducting tests, the RDS reception function may not work prop-
erly.
conducting tests, the RDS reception function may not work prop-
erly.
!
When you receive an RDS station whose signal is too weak,
information like the station name may not be displayed.
information like the station name may not be displayed.
!
"NO PS" or "NO PTY" will flash for about 5 seconds, and then the
frequency will be displayed.
frequency will be displayed.
1
Press the ON/STAND-BY button to enter the stand-by mode.
2
Whilst pressing down the TUNER (BAND) button and the 2 but-
ton, press the ON/STAND-BY button until "TUNER CL" appears.
ton, press the ON/STAND-BY button until "TUNER CL" appears.
1 Press the PRESET ( or ) button to check whether the names
are correct.
2 If you find a wrong name during receiving the station, wait until the
correct name will be displayed. And then press the MEMORY but-
ton.
ton.
3 Within 5 seconds, press the MEMORY button whilst the preset
channel number is flashing.
!
The new station name has been stored in memory correctly.
04/3/19
XL-DV50H(H)_E.fm
E-43
ENGLISH
TINSZA007SJZZ
XL-DV50H
Ad
v
a
nced
Feature
s
Changing the initial setting of DVD
Note:
Settings are retained even if the unit is set to the stand-by mode.
Settings are retained even if the unit is set to the stand-by mode.
1
After pressing the button, press the SET UP button.
2
Press the cursor ( or )
button to select the main
menu and press the ENTER
button.
button to select the main
menu and press the ENTER
button.
3
Press the cursor ( or )
button to select the sub-
menu and press the ENTER
button.
button to select the sub-
menu and press the ENTER
button.
To return to the previous dis-
play, press the cursor ( ) but-
ton. Or press the SHIFT button
and then press the RETURN
button.
play, press the cursor ( ) but-
ton. Or press the SHIFT button
and then press the RETURN
button.
Submenu
4
Press the cursor ( or ) button to change the setting and
press the ENTER button.
press the ENTER button.
!
To return to the previous display, press the cursor ( ) button.
Or press the SHIFT button and then press the RETURN but-
ton.
Or press the SHIFT button and then press the RETURN but-
ton.
!
To change other settings, begin from step 2.
5
Press the SET UP button.
The new setting is memorised.
Audio Setup
Video Setup
Language
Setup
Display Setup
System Setup
Language Setup
OSD Language
Audio
Subtitle
Disc Menu
English
English
English
English
Enter
8
7
6
5
4
3
2
1
04/3/19
XL-DV50H(H)_E.fm
E-44
ENGLISH
XL-DV50H
TINSZA007SJZZ
Ad
v
a
nced
Feature
s
Setting
Selectable parameters
(* indicates initial settings.)
Description
Reference
page
Language Setup
OSD Language
English*
Français
Español
Deutsch
Nederlands
Italiano
Svenska
Français
Español
Deutsch
Nederlands
Italiano
Svenska
Selects the initial or playback setting language.
P. 47
Audio
English*
French
French
Select a language to play.
P. 47
Subtitle
English*
French
French
Selects the subtitle displayed on the TV screen.
P. 47
Disc menu
English*
French
French
Selects the disc menu language.
P. 47
Audio Setup
Digital output
BitStream*
LPCM
LPCM
Select a type of signal sent from the digital audio output
socket.
socket.
P. 52
LPCM output
48 kHz
96 kHz*
96 kHz*
PCM sound signals recorded in 96 kHz are converted to 48
kHz.
kHz.
Analog output
Surround
2.1Ch*
2.1Ch*
Select a type of signal sent to the speaker.
Surround: 2 channel (video CD/audio CD) or 5.1 channel
(DVD) sound are converted to 2.1 channel
sound (virtual speaker surround sound).
sound (virtual speaker surround sound).
2.1Ch:
2 channel (video CD/audio CD) or 5.1 channel
(DVD) sound are converted to 2.1 channel
sound (with the subwoofer sound increased).
(DVD) sound are converted to 2.1 channel
sound (with the subwoofer sound increased).
Compression
On
Off*
Off*
Set to on to enjoy the realistic sound as recorded on the
disc.
disc.
On:
Realistic sound is produced as recorded on
DVD/video CD/audio CD.
DVD/video CD/audio CD.
Off:
The range of signal levels is reduced to moder-
ate sudden increase in playback volume.
ate sudden increase in playback volume.
04/3/19
XL-DV50H(H)_E.fm
E-45
ENGLISH
TINSZA007SJZZ
XL-DV50H
Ad
v
a
nced
Feature
s
Changing the initial setting of DVD (continued)
Setting
Selectable parameters
(* indicates initial settings.)
Description
Reference
page
Video Setup
TV screen
4:3 PS*
4:3 LB
16:9
4:3 LB
16:9
The screen mode should be set according to the connected
TV type.
TV type.
P. 47
TV type
PAL*
NTSC
AUTO
NTSC
AUTO
Selects the correct colour system (TV standard).
P. 13
PAL:
Select this mode for the PAL TV.
NTSC:
Select this mode for the NTSC TV.
AUTO:
Select this mode for the multi-system TV.
Video output
SCART*
S-Video
S-Video
The video output mode should be set according to the con-
nected TV type.
nected TV type.
P. 13, 14
SCART:
Select this when the unit is connected to a TV
with a SCART cable.
with a SCART cable.
S-Video: Select this when the unit is connected to a TV
with an S-video or video cable.
Picture mode
Auto
Film
Video
Smart*
Film
Video
Smart*
Select a mode to optimise DVD or video CD images on a TV.
Auto:
Images are automatically optimised according to
the video source.
the video source.
Film:
Suitable for progressive video output. Select for
DVD movies, etc.
DVD movies, etc.
Video:
Suitable for interlaced video output. Select for
DVD karaoke, video CD, etc.
DVD karaoke, video CD, etc.
Smart:
Optimise special effects for progressive video
output.
output.
Click on the first or last page to see other XL-DV50 service manuals if exist.