Sharp XL-DV50 User Manual / Operation Manual ▷ View online
8
7
6
5
4
3
2
1
04/3/19
XL-DV50H(H)_E.fm
E-18
ENGLISH
XL-DV50H
TINSZA007SJZZ
Prep
aration f
o
r Us
e
Setting the clock
In this example, the clock is set for the 24-hour (0:00) display.
To confirm the time display:
Note:
The "CLOCK" or time will flash at the push of the CLOCK button
when the AC power supply is restored after a power failure or
unplugging the unit.
Readjust the clock as follows.
The "CLOCK" or time will flash at the push of the CLOCK button
when the AC power supply is restored after a power failure or
unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" is not flash-
ing in step 1, step 2 (for selecting the 24-hour or 12-hour display) will
be skipped.
Perform "Setting the clock" from step 1. If the "CLOCK" is not flash-
ing in step 1, step 2 (for selecting the 24-hour or 12-hour display) will
be skipped.
To change the 24-hour or 12-hour display:
1
Press the CLOCK button and within 8 seconds, press the
MEMORY/SET button.
MEMORY/SET button.
2
Within 30 seconds, press the PRESET ( or ) button to
select 24-hour or 12-hour display and then press the MEM-
ORY/SET button.
select 24-hour or 12-hour display and then press the MEM-
ORY/SET button.
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
3
Within 30 seconds, press the PRESET ( or ) button to
adjust the hour and then press the MEMORY/SET button.
adjust the hour and then press the MEMORY/SET button.
Press the PRESET ( or ) button once to advance the time
by 1 hour. Hold it down to advance continuously.
by 1 hour. Hold it down to advance continuously.
4
Within 30 seconds, press the PRESET ( or ) button to
adjust the minutes and then press the MEMORY/SET but-
ton.
adjust the minutes and then press the MEMORY/SET but-
ton.
Press the PRESET ( or ) button once to advance the time
by 1 minute. Hold it down to advance continuously.
by 1 minute. Hold it down to advance continuously.
Press the CLOCK button.
The time display will appear for
about 8 seconds.
The time display will appear for
about 8 seconds.
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 54 for details.]
memory (reset)" on page 54 for details.]
2
Perform "Setting the clock" from step 1.
04/3/19
XL-DV50H(H)_E.fm
E-19
ENGLISH
TINSZA007SJZZ
XL-DV50H
D
V
D Oper
ation
Playing a disc
Turn on the TV, and switch the input to the "VIDEO 1" or "VIDEO 2",
etc. accordingly.
etc. accordingly.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DVD/CD button.
3
Press the OPEN/CLOSE button
to open the disc compartment.
to open the disc compartment.
All trays open in tiers.
4
Place the disc on the disc tray 1, label side up.
Be sure to place 8 cm (3") discs in the middle of the disc trays.
5
To place discs in the trays 2 - 5
1. Slide in the tray with a disc to-
ward the unit.
2. Place a disc in an empty tray.
12 cm (5")
8 cm (3")
6
TI
N
S
ZA0
0
7
SJ
Z
Z
Z
8
7
6
5
4
3
2
1
04/3/19
XL-DV50H(H)_E.fm
E-20
ENGLISH
XL-DV50H
TINSZA007SJZZ
D
V
D Oper
ation
To stop playback:
DVD:
Press the button twice.
DVD:
Press the button twice.
VCD/CD/MP3/JPEG:
Press the button.
Press the button.
To play from a specified disc:
Note:
If a disc tray with no disc is selected, playback will not start, and only
parentheses of the indicator "( )" disappear.
If a disc tray with no disc is selected, playback will not start, and only
parentheses of the indicator "( )" disappear.
To exchange other discs whilst playing a disc:
Press the OPEN/CLOSE button. When trays open, exchange discs.
The tray in use does not open.
Press the OPEN/CLOSE button. When trays open, exchange discs.
The tray in use does not open.
To remove the discs:
Note:
DVD discs cannot be removed in the resume play mode. Press the
button and then remove the disc.
DVD discs cannot be removed in the resume play mode. Press the
button and then remove the disc.
6
Press the OPEN/CLOSE button to close the disc compart-
ment.
ment.
Discs supporting auto start will start to play once you close the
disc tray even if you do not press the (play) button.
disc tray even if you do not press the (play) button.
7
If playback does not start, press the (play) button.
"
When playing a DTS on this unit, sound is not heard from the
speakers. To listen to the sound, select another audio output in
the "To change the audio language (audio output)" on page 27.
speakers. To listen to the sound, select another audio output in
the "To change the audio language (audio output)" on page 27.
When the menu appears on the TV screen:
On DVD, select an item by using the cursor ( , , or ) button
and press the ENTER button.
and press the ENTER button.
On video CD, select an item by using the direct number buttons.
To interrupt playback:
Press the STILL/PAUSE button on the remote
control.
To resume playback from the same point, press
the (play) button.
Press the STILL/PAUSE button on the remote
control.
To resume playback from the same point, press
the (play) button.
Pause indicator
Chapter or
track number
track number
The sound mode in use appears during DVD playback.
Play indicator
Selected disc type Playing time
1. Press
the 1
- 5
button.
2. Press the (play) button.
Selected disc number
1. In the stop mode, press the OPEN/CLOSE
button.
All trays open in tiers.
All trays open in tiers.
2. Remove the disc in the tray 1.
3. Slide in the tray 1 toward the unit. In the
3. Slide in the tray 1 toward the unit. In the
same way, remove discs in the trays 2 - 5.
4. After removing the discs, press the OPEN/
CLOSE button again.
7
TI
N
S
ZA0
0
7
SJ
Z
Z
Z
04/3/19
XL-DV50H(H)_E.fm
E-21
ENGLISH
TINSZA007SJZZ
XL-DV50H
D
V
D Oper
ation
Playing a disc (continued)
Caution:
!
Do not place two discs in one disc tray.
!
Do not play discs with special shapes (heart or octagon shaped)
as it may cause malfunctions.
as it may cause malfunctions.
!
Do not push the disc compartment whilst it is moving.
!
If the power fails whilst the disc compartment is open, wait until
the power is restored.
the power is restored.
!
If the disc compartment is stopped with force, the unit will not
function. If this occurs, press the ON/STAND-BY button to enter
the power stand-by mode and then turn the power on again.
function. If this occurs, press the ON/STAND-BY button to enter
the power stand-by mode and then turn the power on again.
!
If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.
skip or not play.
!
When attempting to play discs with scratches or of a different
region number, or unplayable or restricted (*1) discs, an error
message will appear on the TV display and the disc will not play.
region number, or unplayable or restricted (*1) discs, an error
message will appear on the TV display and the disc will not play.
Notes:
!
When the unit is turned on, no operation is possible for 10 sec-
onds as the unit is performing the initial setting.
onds as the unit is performing the initial setting.
!
Stop positions may be recorded on some discs. When you play
such a disc, playback stops there.
such a disc, playback stops there.
!
During an operation, " " may appear indicating that the opera-
tion is disabled by the disc.
tion is disabled by the disc.
"
To resume playback after stopping
(resume play)
(resume play)
You can resume playback from the point playback is stopped.
To cancel resume play:
Press the button again whilst "
Press the button again whilst "
Pre-Stop" is lit.
Notes:
!
The resume play feature is disabled on some discs.
!
Depending on the disc, playback may resume slightly before the
position where it was stopped.
position where it was stopped.
(*1) Viewing is prohibited on some DVDs according to the audi-
ence age.
1
Whilst the disc is playing, press
the
the
button.
The system stores the point you stopped.
2
To restart play, press the
(play) button.
(play) button.
Playback resumes from the point you left off.
Pre-Stop
Play
Stop
Click on the first or last page to see other XL-DV50 service manuals if exist.