Sharp XL-DV50 User Manual / Operation Manual ▷ View online
8
7
6
5
4
3
2
1
04/3/19
XL-DV50H(H)_E.fm
E-14
ENGLISH
XL-DV50H
TINSZA007SJZZ
Prep
aration f
o
r Us
e
Connecting to a TV with an S-video input socket:
If your TV is equipped with an S-video input socket, you can enjoy
higher quality images by connecting it with an S-video cable (not
supplied).
If your TV is equipped with an S-video input socket, you can enjoy
higher quality images by connecting it with an S-video cable (not
supplied).
Note:
When the video and S-video cables are both connected, the images
from the S-video input socket appears on your TV.
When the video and S-video cables are both connected, the images
from the S-video input socket appears on your TV.
Connecting to a TV with a video input socket:
If your TV is equipped only with a video input socket (without
SCART), connect a video cable (not supplied) to enjoy images.
If your TV is equipped only with a video input socket (without
SCART), connect a video cable (not supplied) to enjoy images.
Set the video output mode to "S-Video". For the procedure, refer
to "Changing the initial setting of DVD" on pages 43, 45.
to "Changing the initial setting of DVD" on pages 43, 45.
TV
To S-video
input socket
input socket
Video signal
S-video cable
(commercially available)
(commercially available)
Set the video output mode to "S-Video". For the procedure, refer
to "Changing the initial setting of DVD" on pages 43, 45.
to "Changing the initial setting of DVD" on pages 43, 45.
Notes:
"
Change the TV input in accordance with the connected socket.
"
Do not connect other equipment (VCR, etc.) between the TV
and this unit. Pictures may be distorted.
and this unit. Pictures may be distorted.
"
Refer to the operation manual of the equipment to be connect-
ed.
ed.
"
Insert the plugs fully to avoid fuzzy pictures or noise.
TV
To video
input socket
input socket
Video signal
Video cable
(commercially available)
(commercially available)
04/3/19
XL-DV50H(H)_E.fm
E-15
ENGLISH
TINSZA007SJZZ
XL-DV50H
Prep
aration f
o
r Us
e
System connections (continued)
!
Connecting the AC power lead
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket. If you plug in the unit
first, the unit will enter the demonstration mode.
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket. If you plug in the unit
first, the unit will enter the demonstration mode.
Notes:
"
Never use a power lead other than the one supplied. Otherwise, a
malfunction or an accident may occur.
malfunction or an accident may occur.
"
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
be in use for a prolonged period of time.
!
Demonstration mode
!
To turn the power on
Cooling fan:
A cooling fan is built into this unit for better heat radiation. Do not
cover the opening in this section with any obstacles to avoid dam-
age to the unit.
cover the opening in this section with any obstacles to avoid dam-
age to the unit.
Wall socket
(AC 230 V, 50 Hz)
(AC 230 V, 50 Hz)
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration
mode:
When the unit is in the power stand-
by mode (demonstration mode),
press the X-BASS/DEMO button.
The unit will enter the low power
consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to se-
lect the extra bass mode.
mode:
When the unit is in the power stand-
by mode (demonstration mode),
press the X-BASS/DEMO button.
The unit will enter the low power
consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to se-
lect the extra bass mode.
Press the ON/STAND-BY but-
ton to turn the power on.
ton to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
mode.
8
7
6
5
4
3
2
1
04/3/19
XL-DV50H(H)_E.fm
E-16
ENGLISH
XL-DV50H
TINSZA007SJZZ
Prep
aration f
o
r Us
e
Remote control
!
Battery installation
Precautions for battery use:
"
Replace all old batteries with new ones at the same time.
"
Do not mix old and new batteries.
"
Remove the batteries if the unit is not to be used for long periods
of time. This will prevent potential damage due to battery leak-
age.
of time. This will prevent potential damage due to battery leak-
age.
Caution:
"
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
"
Installing the batteries incorrectly may cause the unit to malfunc-
tion.
tion.
Notes concerning use:
"
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 "AA" size batteries (UM/
SUM-3, R6, HP-7 or similar).
operation becomes erratic. Purchase 2 "AA" size batteries (UM/
SUM-3, R6, HP-7 or similar).
"
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
sensor on the unit with a soft cloth.
"
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
operation. Change the lighting or the direction of the unit if this
occurs.
"
Keep the remote control away from moisture, heat, shock, and
vibrations.
vibrations.
!
Test of the remote control
Check the remote control after checking all the connections (see
pages 11 - 15).
Point the remote control directly at the remote sensor on the unit.
pages 11 - 15).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy music.
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy music.
1
Remove the battery cover.
2
Insert the supplied batteries according to the direction indi-
cated in the battery compartment.
cated in the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
3
Replace the cover.
0.2 m - 6 m
(8" - 20')
(8" - 20')
Remote sensor
04/3/19
XL-DV50H(H)_E.fm
E-17
ENGLISH
TINSZA007SJZZ
XL-DV50H
Prep
aration f
o
r Us
e
General control
!
Volume control
!
Subwoofer volume control
!
Bass control (X-BASS)
!
Equaliser
When the EQUALIZER (EQ-MODE) button is pressed, the current
mode setting will be displayed. To change to a different mode, press
the EQUALIZER (EQ-MODE) button repeatedly until the desired
sound mode appears.
mode setting will be displayed. To change to a different mode, press
the EQUALIZER (EQ-MODE) button repeatedly until the desired
sound mode appears.
!
Surround
Note:
When the input source is "TUNER" or "AUX", the surround mode is
not available.
When the input source is "TUNER" or "AUX", the surround mode is
not available.
Main unit operation:
When the VOLUME control is turned
clockwise, the volume will increase.
When it is turned anti-clockwise, the
volume will decrease.
When the VOLUME control is turned
clockwise, the volume will increase.
When it is turned anti-clockwise, the
volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the volume.
Press the VOLUME (+ or -) button to increase or decrease the volume.
Press the SHIFT button on the re-
mote control, and adjust the volume.
mote control, and adjust the volume.
30 (MAXIMUM)
29
0 .....
30 (MAXIMUM)
29
0 .....
When the power is first turned on,
the unit will enter the extra bass
mode which emphasises the bass
frequencies, and "X-BASS" will ap-
pear. To cancel the extra bass
mode, press the X-BASS/DEMO (X-
BASS) button.
the unit will enter the extra bass
mode which emphasises the bass
frequencies, and "X-BASS" will ap-
pear. To cancel the extra bass
mode, press the X-BASS/DEMO (X-
BASS) button.
To enter the surround mode, press
the SHIFT button and SUB TITLE/
SURROUND button on the remote
control. Repeat this operation to exit.
the SHIFT button and SUB TITLE/
SURROUND button on the remote
control. Repeat this operation to exit.
ROCK
FLAT
CLASSIC
The sound is not modified.
Bass and treble are emphasised.
POPS
Bass and treble are slightly emphasised.
JAZZ
Treble is slightly emphasised.
Treble is cut a little.
VOCAL
Vocals (midrange tones) are emphasised.
Click on the first or last page to see other XL-DV50 service manuals if exist.