DOWNLOAD Sharp XL-DAB257NH (serv.man2) Service Manual ↓ Size: 5.57 MB | Pages: 40 in PDF or view online for FREE

2008/July/30

XL-DAB227/257NH

XL-DAB227NH
XL-DAB257NH

By using the direct search buttons, the desired tracks on the current
disc can be played.

A track number higher than the number of tracks on the disc
cannot be selected.
During random play, direct search is not possible.

To stop playback:
Press the   (CD  ) button.

Repeat play can play one track, all tracks or a programmed
sequence continuously.

To cancel repeat play:
Press the PLAY MODE button again until “ ” disappears.

The tracks on the disc can be played in random order automatically.

To cancel random play:
Press the PLAY MODE button. 
“RND” will disappear.

Selected track number

 

The direct search buttons allow you to select up to number 9.

When selecting number 10 or higher, use the “+10” button.

 

1 Press the “+10” button once.

2 Press the “1” button.

3 Press the “3” button.

1 Press the “+10” button twice.

2 Press the “1” button.

3 Press the “3” button.

4 Press the “0” button.

To repeat one track:
Press the PLAY MODE button once.
Press the   /   button.

To repeat all tracks:
Press the PLAY MODE button twice.
Press the   /   button.

To repeat desired tracks:
Perform steps 1 - 6 in “Programmed play” section on page 22 and 
then press the PLAY MODE button once.
Press the   /   button.

To random play all tracks:
Press and hold down PLAY MODE button on the remote control. 
Press the   /   button.

XL-DAB227NH

2008/July/30

XL-DAB227/257NH

XL-DAB257NH

If you press the 

 button during random play, you can move to

the track selected next by the random operation. On the other
hand, the 

 button does not allow you to move to the previous

track. The beginning of the track being played will be located.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)

Caution:
After performing repeat or random play, be sure to press the 

 (CD  ) button. Otherwise, the disc will play continuously.

You can choose up to 32 selections for playback in the order you like.

To cancel the programmed play mode:
Whilst in the stop mode and the “MEMORY” indicator is lit, press the
CLEAR/DIMMER button on the remote control. The “MEMORY”
indicator will disappear and all the programmed contents will be
cleared.

Adding tracks to the programme:
If a programme has been previously stored, the “MEMORY” indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original programme.

To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the

 or 

 button.

MP3/WMA folder programmed:
Only tracks in the same folder can be select. Select which folder to
be progammed before entering programme mode. (refer page 24 to
select folder)

When a disc ejected, the programme is automatically cancelled.
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
During the programme operation, random play is not possible.

Selected track number

You can also select a track by pressing the 

 or 

 button.

Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared 
by pressing the CLEAR/DIMMER button.

The total number in memory will  
appear.

To clear the programmed selections:
Press the CLEAR/DIMMER button on the 
remote control whilst the “MEMORY” 
indicator is flashing.
Each time the button is pressed, one track will 
be cleared, beginning with the last track 
programmed.

2008/July/30

XL-DAB227/257NH

XL-DAB227NH
XL-DAB257NH

To play back MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can download
MP3/WMA (Windows Media Audio) music files. Follow the
instructions from the website on how to download the music files.
You can then play back these downloaded music files by burning
them to a CD-R/RW disc.

Your downloaded song/files are for personal use only. Any other
usage of the song without owner’s permission, is against the law.

If MP3/WMA files are recorded in several folders, a folder number will
be set to each folder automatically.

These folders can be selected by the FOLDER button on the remote
control. If there is no supported file formats inside the selected folder,
the folder is skipped and the next folder will be selected.
Example: How to set folder number if MP3/WMA format files are
recorded as below figure.

The folder and file order information which is recorded on the disc
depends on the writing software. There maybe possibilities that
this unit will playback the files not according to our expected
playback order.
For CD MP3/WMA, 512 numbers of folders and files inclusives of
the folders which have non playable files can be read.

Folder mode on/off can be operated by the FOLDER button on the
remote control. Files that are played when folder mode is set to the
on position, may differ from those played back when folder mode is
turned off.

Folder Mode Off case:
All the files starting from the selected file will be played back. If file 3
inside Folder C is selected, all the files starting from file 3 will be
played back until file 10 of Folder E.

Folder Mode On case:
All the files inside the selected folder will be played back. 
In case Folder D is selected, file 6, 7 and 8 will be played back. File
9 and 10 in Folder E will not be played back.

1. ROOT folder is set as folder 1.
2. As for folders inside ROOT folder (Folder A and Folder B), the 

folder which is recorded earlier on the disc will be set as folder 2 
and folder 3.

3. As for folder inside Folder A (Folder C and Folder D), the folder 

which is recorded earlier on the disc will be set as folder 4 and 
folder 5.

4. Folder E that is inside Folder D will be set as folder 6.

ROOT
(FOLDER 1) 

FOLDER A
(FOLDER 2)

FOLDER B
(FOLDER 3)

FILE 9
FILE 10

FILE 3
FILE 4
FILE 5

FILE 6
FILE 7
FILE 8
FOLDER E
(FOLDER 6)

FOLDER C
(FOLDER 4)

FOLDER D
(FOLDER 5)

FILE 1
FILE 2

XL-DAB227NH

2008/July/30

XL-DAB227/257NH

XL-DAB257NH

To play back CD-R/RW.

Note:
If “NO SUPPORT” is displayed, it means “Copyright protected 
WMA file” or “Not supported playback file” is selected.

After disc is loaded, disc info will be displayed.

  or 

 button.

TOTAL Indicator

WMA Indicator

MP3 Indicator

Disc Name

Total number of files

FOLDER Indicator

Total files in Folder 3

FOLDER Number

 

 

 

 

 

 

 

 

Title, Artist & Album name are displayed if they are recorded on 
the disc.
Display content can be changed by pressing the DISPLAY 
button.

In case of playback with the folder mode on, press the TUNING (
or ) button, and the folder can be selected even though it is in
playback/pause mode.
It will continue playback/pause mode in the 1st track of the
selected folder.
(

) Only appears when clock is already set.

(     ) 

File Name Display

Clock Display

Function Display

Title Display

Artist Display

Album Display

TITLE-1 Indicator

TITLE-2 Indicator

TITLE-3 Indicator