Sharp XL-DAB257NH (serv.man2) User Manual / Operation Manual ▷ View online
17
2008/July/30
XL-DAB227/257NH
XL-DAB227NH
XL-DAB257NH
XL-DAB257NH
iPod
To remove iPod adaptor
1. Adaptor with tip.
Hold this tip and pull as direction shown to remove adaptor.
iPod playback
To disconnect iPod
Simply remove the iPod from the iPod dock. It is safe to do so even
during playback.
during playback.
Navigating the iPod menus with the remote
control
control
Note:
The volume level is adjusted by pressing the VOL (+ or –) button on
the main unit or the remote control. Adjusting the volume on the iPod
unit gives no effect.
The volume level is adjusted by pressing the VOL (+ or –) button on
the main unit or the remote control. Adjusting the volume on the iPod
unit gives no effect.
Displaying the Track’s Information
Watching videos on a TV connected to iPod
2. Adaptor without tip.
Insert the tip of a screwdriver
(“–” type, small) into the iPod
adaptor hole as shown and lift
upward to remove.
(“–” type, small) into the iPod
adaptor hole as shown and lift
upward to remove.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the iPod button to select iPod function.
3
Insert iPod unit in iPod dock of main unit. “DOCK OK” will
be displayed for 3 seconds except for iPod mini and 4
be displayed for 3 seconds except for iPod mini and 4
th
Generation iPod.
Note:
The iPod name and
indicator will displayed once “DOCK
OK”.
4
Press the iPod / button to start playback.
pull up
iPod
iPod adaptor
1
Press the iPod MENU button to view the menu on iPod unit.
Press it again to go back to previous menu.
Press it again to go back to previous menu.
2
Use the iPod CURSOR ( or
) button to select an item on
the menu and then press iPod ENTER button.
Press the iPod DISPLAY button repeatedly to see the desired information.
1
Press the iPod DISPLAY button for more than 2 seconds.
“TV DISP” will appear on display.
“TV DISP” will appear on display.
2
Select the desired video from iPod unit to be played.
3
Press the iPod ENTER button to start playback.
Pressing the iPod ENTER button on the remote control will play
a selected VIDEO highlighted on the iPod.
Pressing the PLAY button on the remote control will not play the
selected VIDEO highlighted.
a selected VIDEO highlighted on the iPod.
Pressing the PLAY button on the remote control will not play the
selected VIDEO highlighted.
TITLE-3 Indicator
Album Display
TITLE-2 Indicator
TITLE-1 Indicator
Title Display
Artist Display
18
XL-DAB227NH
2008/July/30
XL-DAB227/257NH
XL-DAB257NH
iPod
Listening to the iPod (continued)
Notes:
If the TV Out setting is already turned On at video menu, the video
is automatically displayed on the TV screen when iPod ENTER
key is pressed.
To return to watching video on iPod screen, press the iPod MENU
button to enter video menu. Then press the iPod DISPLAY button
for more than 2 seconds until “iPod DISP” appears. Repeat steps
2 and 3.
During iPod video playback, pressing the iPod DISPLAY button
will not toggle video out display between iPod and TV.
is automatically displayed on the TV screen when iPod ENTER
key is pressed.
To return to watching video on iPod screen, press the iPod MENU
button to enter video menu. Then press the iPod DISPLAY button
for more than 2 seconds until “iPod DISP” appears. Repeat steps
2 and 3.
During iPod video playback, pressing the iPod DISPLAY button
will not toggle video out display between iPod and TV.
iPod operation
The operations described below depend on the generation iPod you
are using.
The operations described below depend on the generation iPod you
are using.
System on operation
When the main unit is powered on, the iPod unit will automatically
power on when docked in the unit (including TIMER function).
When the main unit is powered on, the iPod unit will automatically
power on when docked in the unit (including TIMER function).
System off (stand-by operation)
When the main unit is turned to stand-by mode, the docked iPod unit
will automatically turn to stand-by mode.
When the main unit is turned to stand-by mode, the docked iPod unit
will automatically turn to stand-by mode.
iPod playback detection function
Once the play button on the iPod unit is pressed, the main unit will
automatically change to iPod function overriding the previous
function selected.
Once the play button on the iPod unit is pressed, the main unit will
automatically change to iPod function overriding the previous
function selected.
Caution:
Unplug all accessories for the iPod before inserting it into the iPod
dock.
Stop button ( ) at main unit is invalid during iPod function.
dock.
Stop button ( ) at main unit is invalid during iPod function.
Various iPod functions
iPod
Function
Main
unit
Remote
control
Operation
Play
Press in the pause mode.
Pause
Press in the playback mode.
iPod
Function
Main
unit
Remote
control
Operation
Track up/
down
down
____
Press in the playback or
pause mode.
If you press the button in
the pause mode, press the
pause mode.
If you press the button in
the pause mode, press the
/ button to start the
desired track.
Fast
forward/
reverse
forward/
reverse
____
Press and hold down in the
playback mode.
Release the button to
resume playback.
playback mode.
Release the button to
resume playback.
Back light/
TV OUT
TV OUT
____
iPod back light ON.
Press for more than 2
seconds to toggle the
video out display between
iPod or TV.
Press for more than 2
seconds to toggle the
video out display between
iPod or TV.
Repeat
____
Press to toggle repeat
mode.
mode.
Shuffle
____
Press and hold down to
toggle shuffle mode.
toggle shuffle mode.
Menu
____
Press to view the iPod
menu during iPod
function.
menu during iPod
function.
Enter
____
Press to confirm the
selection.
Press to play the selected
VIDEO highlighted on the
iPod.
selection.
Press to play the selected
VIDEO highlighted on the
iPod.
Cursor Up/
Down
Down
____
Press to select the iPod
menu.
menu.
Track
Information
Information
____
Press to display the Track
Title/Artist Name/Album
Name.
Title/Artist Name/Album
Name.
PRESET
PRESET
19
2008/July/30
XL-DAB227/257NH
XL-DAB227NH
XL-DAB257NH
XL-DAB257NH
CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc
This system can play back a standard CD, CD-R/RW in the CD format
and CD-R/RW with MP3 or WMA files, but cannot record on them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.
and CD-R/RW with MP3 or WMA files, but cannot record on them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
During VBR file playback, time counter in the display may differ
from its actual playback time.
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
VBR files.
During VBR file playback, time counter in the display may differ
from its actual playback time.
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for
Windows Media Player.
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for
Windows Media Player.
“MP3” or “WMA” indicator will light up after the unit reads
information on an MP3 or WMA disc.
Bitrate which is supported by WMA is 64 ~ 160 kbps.
information on an MP3 or WMA disc.
Bitrate which is supported by WMA is 64 ~ 160 kbps.
Auto power on function:
When you press any of the following buttons, the unit turns on.
When you press any of the following buttons, the unit turns on.
CD button (main unit and remote control): The unit turns on and
the “CD” function is activated.
CD
the “CD” function is activated.
CD
/ button on the remote control: The unit turns on and CD
playback starts (regardless of the last function).
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TUNER, AUDIO IN, iPod).
Auto power off function:
In the stop mode of CD, MP3 or WMA operation, the main unit enters
the stand-by mode after 15 minutes of inactivity.
In the stop mode of CD, MP3 or WMA operation, the main unit enters
the stand-by mode after 15 minutes of inactivity.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the disc on the disc tray, label side up.
Be sure to place 8 cm (3") disc in the middle of the disc tray.
XL-DAB227
XL-DAB22
7
12 cm (5")
8 cm (3")
Continued to the next page
20
XL-DAB227NH
2008/July/30
XL-DAB227/257NH
XL-DAB257NH
CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc (continued)
After the last track is played, the unit will stop automatically.
To remove the discs:
In the stop mode, press the OPEN/CLOSE button.
In the stop mode, press the OPEN/CLOSE button.
Caution:
Do not place two discs in one disc tray.
Do not play discs of special shapes (heart, octagon, etc).
It may cause malfunctions.
Do not push the disc tray whilst it is moving.
If the power fails whilst the tray is open, wait until the power is
restored.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
Do not play discs of special shapes (heart, octagon, etc).
It may cause malfunctions.
Do not push the disc tray whilst it is moving.
If the power fails whilst the tray is open, wait until the power is
restored.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
Various disc functions
Notes for CD or MP3/WMA disc:
5
Press the OPEN/CLOSE button to close the disc tray.
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
6
Press the / button to start playback.
[CD]
[MP3/WMA]
Total number of
tracks on the disc
tracks on the disc
Total playing time
of the disc
of the disc
Total number
of folders
of folders
Total
Indicator
Indicator
MP3 indicator
WMA indicator
Disc play indicator
Function
Main unit
Remote
control
Operation
Play
Press in the stop mode.
Stop
Press in the playback
mode.
mode.
Pause
Press in the playback
mode. Press the /
button to resume
playback from the
paused point.
mode. Press the /
button to resume
playback from the
paused point.
Track up/
Track
down
Track
down
Press in the playback or
stop mode.
stop mode.
If you press the button in
the stop mode, press the
the stop mode, press the
/ button to start the
desired track.
Fast
forward/
Fast
reverse
forward/
Fast
reverse
Press and hold down in
the playback mode.
the playback mode.
Release the button to
resume playback.
resume playback.
When the end of the last track is reached during fast forward,
“END” will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
“END” will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
Rewritable multi-session discs with unfinished writing, can still be
played.
played.
PRESET
PRESET
Click on the first or last page to see other XL-DAB257NH (serv.man2) service manuals if exist.