Sharp XL-30 (serv.man2) User Manual / Operation Manual ▷ View online
20
HEADPHONES
To PHONES
socket
●
Before plugging in or unplugging the head-
phones, make sure the volume level is reduced.
phones, make sure the volume level is reduced.
●
Be sure your headphones have a 3.5 mm (1/8")
diameter plug and are between 16 ohms and 50
ohms impedance. The recommended impedance
is 32 ohms.
diameter plug and are between 16 ohms and 50
ohms impedance. The recommended impedance
is 32 ohms.
●
When headphones are connected, the speak-
ers are disconnected automatically. Adjust the
VOLUME control for desired volume.
ers are disconnected automatically. Adjust the
VOLUME control for desired volume.
RESETTING THE MICROCOMPUTER
1
3
3
3
2,3
AC INPUT
Reset the microcomputer under the following
conditions:
conditions:
●
To erase all of the stored memory contents (clock
and timer settings, and tuner and CD presets).
and timer settings, and tuner and CD presets).
●
If the display is not correct.
●
If the operation is not correct.
1
Press the ON/STAND-BY button to enter the
stand-by mode.
stand-by mode.
2
Unplug the AC power lead from the AC INPUT
socket on this unit.
socket on this unit.
3
Whilst pressing down the MEMORY/SET but-
ton and the
ton and the
0
button, plug the AC power lead
into the AC INPUT socket on this unit.
Caution:
●
The operation explained above will erase all data
stored in memory, such as clock and timer set-
tings, and tuner and CD presets.
stored in memory, such as clock and timer set-
tings, and tuner and CD presets.
■
Internal care
●
Do not touch the laser pickup lens. If fingerprints
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
●
Dirty heads, capstan or pinch roller can cause
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
●
After long use, the deck’s heads and capstan
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetis-
er’s instructions carefully before use.
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetis-
er’s instructions carefully before use.
■
External care
●
Periodically wipe the cabinet with a soft cloth and
a diluted soap solution, then wipe with a dry cloth.
a diluted soap solution, then wipe with a dry cloth.
●
Do not use chemically treated cleaning cloths or
other chemicals.
other chemicals.
MAINTENANCE
*XL-30H(SUK)P19-P21
00.2.3, 2:00 PM
20
21
SPECIFICATIONS
As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be some deviations from these values
in individual units.
specification changes for product improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be some deviations from these values
in individual units.
●
Cassette deck section
Frequency re-
50 - 14,000 Hz (Normal tape)
sponse:
Signal/noise ratio: 50 dB
Wow and flutter:
0.25 % (WRMS)
●
Speaker section
Type:
Full range speaker system
Speakers:
10 cm (4") full-range speaker
Rated input
power:
power:
5 W
Maximum input
power:
power:
10 W
Impedance:
4 ohms
Dimensions:
Width; 145 mm (5-3/4")
Height; 240 mm (9-1/2")
Depth; 191 mm (7-1/2")
Depth; 191 mm (7-1/2")
Weight:
1.3 kg (2.9 lbs.)/each
●
General
Power source:
AC 230 V, 50 Hz
Power consump-
tion:
tion:
26 W
Dimensions:
Width; 160 mm (6-5/16")
Height; 241 mm (9-1/2")
Depth; 249 mm (9-13/16")
Height; 241 mm (9-1/2")
Depth; 249 mm (9-13/16")
Weight:
2.7 kg (6.0 lbs.)
●
Amplifier section
Output power:
RMS; 10 W (5 W + 5 W)
(10 % T.H.D.)
(10 % T.H.D.)
Output terminals: Speakers; 4 ohms
Headphones; 16-50 ohms
(recommended; 32 ohms)
(recommended; 32 ohms)
●
Tuner section
Frequency range: FM; 87.5-108 MHz
AM; 522-1,620 kHz
●
Compact disc player section
Type:
Compact disc player
Signal readout:
Non-contact, 3-beam semi-
conductor laser pickup
conductor laser pickup
D/A converter:
1-bit D/A converter
Filter:
8-times oversampling digital
filter
filter
Frequency re-
sponse:
sponse:
20 - 20,000 Hz
Wow and flutter:
Unmeasurable
(less than 0.001% W. peak)
(less than 0.001% W. peak)
*XL-30H(SUK)P19-P21
00.2.3, 2:00 PM
21
MEMO
*XL-30H(SUK)MEMO
00.2.2, 3:59 PM
1
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replace-
ment, of this product subject to the conditions listed below:-
ment, of this product subject to the conditions listed below:-
1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does
not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with
the product, or repair other than by a Service Facility appointed by Sharp.
the product, or repair other than by a Service Facility appointed by Sharp.
2. As this product is intended for private domestic use only, the guarantee will not apply if the product
is used in the course of a business, trade or profession.
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed
Service Facility within one year from the date this product was purchased. Proof of purchase must
be provided.
be provided.
4. The guarantee does not cover carriage costs, jewelled styli, audio tapes, compact discs or batter-
ies.
5. In the unlikely event of this product requiring repair, please contact the supplier from whom it was
purchased. Where this is not possible, please contact the Sharp Customer Information Centre on
the telephone number given below.
the telephone number given below.
6. No person has any authority to vary the terms or conditions of this guarantee.
7. This guarantee is offered as an additional benefit to your statutory rights, and does not affect these
rights in any way.
If you have any difficulty operating this product, or would like information on other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.
please telephone the Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 0345 125387
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
TINSE0035SJZZ
A0002.YT
**XL-30H(SUK).FRONT
00.2.4, 4:44 PM
2
