Sharp XL-30 (serv.man2) User Manual / Operation Manual ▷ View online
16
(Continued)
(Main unit operation)
1
Press the VOLUME/JOG button.
●
The preset channel number will flash.
2
Whilst the preset channel number is flashing,
turn the jog dial to select the desired station.
(Remote control operation)
Press the PRESET (
Press the PRESET (
or
) button for less than
0.5 seconds to select the desired station.
●
The stations (preset channel number, frequency
and frequency band) which have been stored in
memory will appear in the display in numerical
order, irrespective of the frequency bands.
and frequency band) which have been stored in
memory will appear in the display in numerical
order, irrespective of the frequency bands.
Note:
When searching for a memorised station, do not
press the PRESET button for more than 0.5 sec-
onds.
When the PRESET button is pressed for more than
0.5 seconds, the unit will enter the preset memory
scan mode.
When searching for a memorised station, do not
press the PRESET button for more than 0.5 sec-
onds.
When the PRESET button is pressed for more than
0.5 seconds, the unit will enter the preset memory
scan mode.
To recall a memorised station:
1
2
( )
PRESET
To clear a memorised station:
4
3
1
2
1
Press the VOLUME/JOG button.
2
Turn the jog dial to select the preset channel
number you want to erase.
3
Press the MEMORY/SET button.
4
Within 5 seconds, press the TUN CLEAR button.
1,2
1
To scan the preset stations, press the PRESET
(
(
or
) button for more than 0.5 seconds.
●
The station preset number flashes and pro-
grammed stations are sequentially received for
5 seconds each.
grammed stations are sequentially received for
5 seconds each.
2
Press the PRESET (
or
) button again to
stop the memory scan at the desired station.
Note:
When the preset memory does not have any sta-
tions stored in it, the preset memory scan will not
function.
When the preset memory does not have any sta-
tions stored in it, the preset memory scan will not
function.
Backup function:
The backup function protects all station presets for
a few hours should there be a power failure or the
AC power lead is removed from the AC socket.
a few hours should there be a power failure or the
AC power lead is removed from the AC socket.
■
Preset memory scan
The stations saved in the preset memory can be
scanned automatically.
scanned automatically.
*XL-30H(SUK)P14-P18
00.2.2, 3:57 PM
16
17
RECORDING
1
Press the ON/STAND-BY button to turn the
power on.
power on.
2
Press the FUNCTION button until “Cd” or “no
dISC” appears in the display.
dISC” appears in the display.
3
Load the desired disc.
●
Use the APMS function to store the tracks you
want to record in memory. (See page 13.)
want to record in memory. (See page 13.)
4
Load a cassette into the cassette compartment.
5
Press the REC PAUSE button.
●
“REC” will flash.
6
Press the
0
button.
To stop recording:
Press the
■
button.
●
The tape will stop. When the
■
button is pressed
again, the CD will stop.
●
When you press the CD
■
button on the remote
control, the CD and tape will stop.
■
Recording from the built-in radio
1
Tune in to the desired station. (See pages 15 -
16.)
16.)
2
Load a cassette into the cassette compartment.
3
Press the REC PAUSE button.
●
“REC” will flash.
Note:
●
If a whistling noise is heard whilst recording from
an AM station, move the AM loop aerial to a po-
sition where noise is no longer heard from the
unit.
an AM station, move the AM loop aerial to a po-
sition where noise is no longer heard from the
unit.
4
Press the
0
button.
To stop recording:
Press the
■
button.
■
Erasing a recorded tape
1
Press the FUNCTION button until “TP” appears
in the display.
in the display.
2
Press the REC PAUSE button.
●
“REC” will flash.
3
Press the
0
button.
●
When recording important selections, be sure
to make a preliminary test to ensure that the
desired material is being properly recorded.
to make a preliminary test to ensure that the
desired material is being properly recorded.
●
The ALC (Automatic Record Level Control) cir-
cuit automatically controls the level of the input
signal used for recording.
cuit automatically controls the level of the input
signal used for recording.
●
The VOLUME, BASS and TREBLE controls may
be adjusted with no effect on the recorded sig-
nal. (Variable Sound Monitor)
be adjusted with no effect on the recorded sig-
nal. (Variable Sound Monitor)
●
Metal and CrO
2
tapes should not be used for
recording.
■
Recording from the built-in CD player
(CD Synchronised Recording System)
1
2
6
4
5
2
3
4
*XL-30H(SUK)P14-P18
00.2.2, 3:57 PM
17
18
HOW TO USE THE BUILT-IN TIMER
■
Timer playback
TIMER
4,5,6
2,5,6
1
3
2
6
Turn the jog dial to set the minute at which to
start, and then press the MEMORY/SET but-
ton.
start, and then press the MEMORY/SET but-
ton.
●
The timer playback starting time, function, and
volume will be displayed, and then the unit will
enter the stand-by mode automatically.
volume will be displayed, and then the unit will
enter the stand-by mode automatically.
●
“
f
” will appear and the current time will be dis-
played.
7
When the preset time is reached, the volume
will increase gradually.
will increase gradually.
8
If you select CD or TAPE in the timer operation,
the unit will enter the stand-by mode after the
playback. If you select TUNER, it will enter the
stand-by mode one hour after the timer play-
back starts.
the unit will enter the stand-by mode after the
playback. If you select TUNER, it will enter the
stand-by mode one hour after the timer play-
back starts.
Caution:
●
Timer recording is not possible.
●
Recording operations are not possible during
timer playback.
timer playback.
To confirm the timer setting:
Press the CLOCK/TIMER/SLEEP button on the
main unit twice or press the TIMER button on the
remote control once.
main unit twice or press the TIMER button on the
remote control once.
●
The timer playback starting time, function, and
volume will be displayed.
volume will be displayed.
●
If you press the TIMER button on the remote
control whilst confirming the timer setting (whilst
“
control whilst confirming the timer setting (whilst
“
f
” is flashing), you can turn the timer playback
stand-by mode on or off.
To change the programmed contents:
After cancelling the timer mode, perform steps 1 -
6 above.
6 above.
To cancel timer operation:
Press the ON/STAND-BY button to turn the power
on.
on.
Note:
●
The previously programmed timer starting time
will be stored until it is reprogrammed.
will be stored until it is reprogrammed.
●
Before setting the timer, make sure that the clock
setting is correct. (Page 9)
setting is correct. (Page 9)
1
Press the ON/STAND-BY button to turn the
power on.
power on.
2
Press the FUNCTION button to select the de-
sired function, and then adjust the sound vol-
ume using the jog dial.
sired function, and then adjust the sound vol-
ume using the jog dial.
3
Press the CLOCK/TIMER/SLEEP button repeat-
edly until “
edly until “
f
” is displayed.
4
Within 6 seconds, press the MEMORY/SET but-
ton.
●
If more than 6 seconds have passed, start again
from step 3.
from step 3.
5
Turn the jog dial to set the hour at which to start,
and then press the MEMORY/SET button.
*XL-30H(SUK)P14-P18
00.2.2, 3:57 PM
18
19
(Continued)
■
Sleep operation
The radio, compact disc and cassette deck can all
be turned off automatically.
be turned off automatically.
(Remote control operation)
1
Play back the desired sound source.
2
Press the SLEEP button.
●
The sleep timer is initially set to 3 hours.
To change the sleep time:
Press the SLEEP button repeatedly to select the
desired sleep time. The time will decrease as fol-
lows.
desired sleep time. The time will decrease as fol-
lows.
●
The amount of sleep time can also be changed
whilst in the sleep mode.
whilst in the sleep mode.
3
The unit will enter the stand-by mode automati-
cally after the preset sleep time has elapsed.
(The sound volume will be reduced one minute
before the preset sleep time expires.)
cally after the preset sleep time has elapsed.
(The sound volume will be reduced one minute
before the preset sleep time expires.)
To confirm the remaining sleep time:
Press the SLEEP button once.
To cancel the sleep operation:
Press the ON/STAND-BY button to enter the stand-
by mode.
by mode.
■
Simultaneous sleep and timer op-
eration
1
Prepare for timer playback.
(Perform steps 1 - 6 on page 18.)
(Perform steps 1 - 6 on page 18.)
2
Press the SLEEP button repeatedly to select
the desired sleep time.
the desired sleep time.
3
Play the desired item (compact disc, tape, etc.).
4
When the preset sleep time has elapsed, the
unit will automatically enter the stand-by mode.
unit will automatically enter the stand-by mode.
5
When the timer preset time is reached, timer
playback will start.
playback will start.
Caution:
●
Be sure your tape length is long enough to per-
form both functions.
If you want to go to sleep and wake up listening
to a tape, and the length of the tape is shorter
than the sleep timer setting, timer playback will
not be possible.
form both functions.
If you want to go to sleep and wake up listening
to a tape, and the length of the tape is shorter
than the sleep timer setting, timer playback will
not be possible.
4
3,5
2
SLEEP
(Main unit operation)
1
Play back the desired sound source.
2
Press the CLOCK/TIMER/SLEEP button repeat-
edly until “SLEEP” is displayed.
edly until “SLEEP” is displayed.
3
Within 5 seconds, press the MEMORY/SET
button.
button.
4
Turn the jog dial to set the time.
(Maximum 3 hours - Minimum 5 minutes, 5-
minute intervals)
(Maximum 3 hours - Minimum 5 minutes, 5-
minute intervals)
OFF
↔
5 minutes ....
↔
3 hours
5
Press the MEMORY/SET button.
6
The unit will enter the stand-by mode automati-
cally after the preset sleep time has elapsed.
(The volume will gradually decrease one minute
before the preset sleep time expires.)
cally after the preset sleep time has elapsed.
(The volume will gradually decrease one minute
before the preset sleep time expires.)
To confirm the remaining sleep time:
Press the CLOCK/TIMER/SLEEP button three
times.
times.
3 hours
→
2 hours
→
1 hour 30 minutes
↑ ↓
OFF
←
15 minutes
←
30 minutes
←
1 hour
*XL-30H(SUK)P19-P21
00.2.3, 2:00 PM
19
Click on the first or last page to see other XL-30 (serv.man2) service manuals if exist.