Sharp SD-NX10 User Manual / Operation Manual ▷ View online
13
NX10H_UK13-18.fm
00/12/17
Pre
p
ar
at
ion
f
o
r U
s
e
Re
mo
te
Cont
ro
l
Remote Control
Battery installation
1
Open the battery cover.
2
Insert the supplied batteries according to the direction indicated in
the battery compartment.
the battery compartment.
When inserting or removing the batteries, push them towards the battery termi-
nals.
nals.
3
Close the battery cover.
Precautions for battery use:
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if the unit will not be used for long periods of time. This will
prevent potential damage due to battery leakage.
prevent potential damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Installing the batteries incorrectly may cause the unit to malfunction.
Notes concerning use:
Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
becomes erratic. Purchase 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
Periodically clean the transmitter on the remote control and the sensor on the
stereo system with a soft cloth.
stereo system with a soft cloth.
Exposing the sensor on the stereo system to strong light may interfere with opera-
tion. Change the lighting or the direction of the stereo system.
tion. Change the lighting or the direction of the stereo system.
Keep the remote control away from moisture, heat, shock, and vibrations.
Test of the remote control
Check the remote control after checking all connections have been made correctly.
(See pages 14 - 16.)
Face the remote control directly to the remote sensor on the unit.
(See pages 14 - 16.)
Face the remote control directly to the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy the
music.
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy the
music.
Remote sensor
0.2 m - 6 m
(8" - 20')
(8" - 20')
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
14
NX10H_UK13-18.fm
00/12/17
Pre
p
ar
at
ion
f
o
r U
s
e
S
y
s
te
m
Connections
System Connections
To the system
input socket
input socket
To the system
control socket
control socket
To the speaker
terminal (R)
terminal (R)
FM aerial
Right speaker
AM loop aerial
Caution:
The SYSTEM CONTROL sockets
are for the MD/CD/tuner unit and the
amplifier unit of SD-NX10H only.
Do not connect to other equipments.
The SYSTEM CONTROL sockets
are for the MD/CD/tuner unit and the
amplifier unit of SD-NX10H only.
Do not connect to other equipments.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
15
NX10H_UK13-18.fm
00/12/17
Pre
p
ar
at
ion
f
o
r U
s
e
S
y
s
te
m
Connections
Aerial connection
Note:
Keep the FM/AM aerial away from the amplifier unit, MD/CD/tuner unit, AC power
lead, and speaker lead. If they are too close, the noise may be heard.
Installing the AM loop aerial:
Keep the FM/AM aerial away from the amplifier unit, MD/CD/tuner unit, AC power
lead, and speaker lead. If they are too close, the noise may be heard.
Installing the AM loop aerial:
Left speaker
Wall socket
(AC 230V, 50 Hz)
(AC 230V, 50 Hz)
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial
wire in the direction where the strongest signal can be received.
wire in the direction where the strongest signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM and GND terminals. Position the AM loop
aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to
a stand or wall with screws (not supplied).
aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to
a stand or wall with screws (not supplied).
< Assembling >
< Attaching to the wall >
White
Black
Wall
Screws
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
16
NX10H_UK13-18.fm
00/12/17
Pre
p
ar
at
ion
f
o
r U
s
e
S
y
s
te
m
Connections
System Connections (continued)
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception. Consult your dealer.
Notes:
When an external FM aerial is used, disconnect the supplied FM aerial wire from the FM
75 OHMS socket.
75 OHMS socket.
When using an external AM aerial, be sure to keep the wire of the AM loop aerial con-
nected.
nected.
Speaker connection
Connect the wire with the black line to the (-) and transparent one to the (+) .
Caution:
Connect the speaker wires to the speakers first, then to the unit.
Use speakers with an impedance of 6 ohms or more, as lower impedance speakers can
damage the unit.
damage the unit.
Do not mistake the right and the left channels. The right speaker is the one on the right
side when you face the unit.
side when you face the unit.
Do not let the bare speaker wires touch each other.
Do not stand or sit on the speakers. You may be injured.
Connecting MD/CD/tuner unit and amplifier
unit
unit
Connect the tuner unit and the amplifier unit using the sound connection lead and the sys-
tem connection lead included with this unit.
tem connection lead included with this unit.
Connecting the AC power lead
After checking all the connections have been made correctly, plug the unit into the mains. If
you plug the unit first, the unit will enter the demonstration mode.
you plug the unit first, the unit will enter the demonstration mode.
Note:
Unplug the unit if it will not be used for a prolonged period of time.
Unplug the unit if it will not be used for a prolonged period of time.
Demonstration mode
The first time the unit is plugged in, the unit will enter the demonstration mode. You will see
words scroll.
words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the AUX
(DEMO) button. The unit will enter the low power consumption mode.
(DEMO) button. The unit will enter the low power consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the AUX (DEMO) button again.
When the unit is in the power stand-by mode, press the AUX (DEMO) button again.
AM loop aerial
15 m (49 feet)
7.5 m
(25 feet)
External AM aerial
Earth rod
External FM aerial
2
1
3
Left speaker
Clear
Black line
Right speaker
Plug in with
mark facing down.
mark facing down.
MD/CD/tuner unit
Amplifier unit
Red
Sound connection lead
System connection lead
Red
White
White
Plug in with
mark facing up.
mark facing up.
Unplug it whilst pressing the lug on the connector.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other SD-NX10 service manuals if exist.