Sharp SD-EX200 (serv.man19) Service Manual ▷ View online
– 5 –
SD-EX200H
1. Tweeter
2. Speaker Grille
3. Woofer
4. Bass Reflex Duct
5. Speaker Terminals
2. Speaker Grille
3. Woofer
4. Bass Reflex Duct
5. Speaker Terminals
1
3
2
4
5
Speaker grilles are removable:
Make sure nothing comes into contact with
the speaker diaphragms when you remove
the speaker grilles.
the speaker diaphragms when you remove
the speaker grilles.
Remote control
1. Remote Control Transmitter
2. CD Play/Pause Button
3. CD Stop Button
4. Cursor/Tuner Preset Buttons
5. RDS Display Button
6. RDS Programme Type/Traffic Information Search Button
7. CD Track Down or Fast Reverse/Tuning Down Button
8. CD Memory Button
9. Programme Clear Button
2. CD Play/Pause Button
3. CD Stop Button
4. Cursor/Tuner Preset Buttons
5. RDS Display Button
6. RDS Programme Type/Traffic Information Search Button
7. CD Track Down or Fast Reverse/Tuning Down Button
8. CD Memory Button
9. Programme Clear Button
10. Surround Button
11. Timer Button
12. Enter Button
13. On/Stand-by Button
14. Auxiliary Button
15. CD Play Mode Select Button
16. Bass/Treble Button
17. Tuner (Band) Button
18. RDS ASPM (Auto Station Programme Memory) Button
19. CD Track Up or Fast Forward/Tuning Up Button
20. Volume Up and Down Buttons
21. CD/Tuner Direct Buttons
22. CD Time Display Button
23. Clock Display/Dimmer Button
11. Timer Button
12. Enter Button
13. On/Stand-by Button
14. Auxiliary Button
15. CD Play Mode Select Button
16. Bass/Treble Button
17. Tuner (Band) Button
18. RDS ASPM (Auto Station Programme Memory) Button
19. CD Track Up or Fast Forward/Tuning Up Button
20. Volume Up and Down Buttons
21. CD/Tuner Direct Buttons
22. CD Time Display Button
23. Clock Display/Dimmer Button
2
1
3
5
4
7
6
8
10
11
12
16
17
13
14
15
18
20
21
19
9
22
23
23
Buttons with " " mark in the illustration or highlighted in bold on the list can be op-
erated on the remote control only.
erated on the remote control only.
SD-EX200H
CP-EX200H
SD-EX200H
– 6 –
1
Rear Cabinet
1. Screw ...................... (A1) x7
6-1
2
Main PWB/
1. Screw ...................... (B1) x5
6-2
Tuner Unit
2. Jack Cover, Left ...... (B2) x1
3. Screw ...................... (B3) x5
4. Socket ..................... (B4) x8
5. Flat Cable ............... (B5) x1
3. Screw ...................... (B3) x5
4. Socket ..................... (B4) x8
5. Flat Cable ............... (B5) x1
3
Front Panel
1. Screw ...................... (C1) x3
6-3
2. Hook ........................ (C2) x1
3. Socket ..................... (C3) x1
3. Socket ..................... (C3) x1
4
Power PWB
1. Screw ...................... (D1) x6
6-3
2. Bracket .................... (D2) x1
5
1-Bit Amp. Unit
1. Screw ...................... (E1) x2
6-3
6
Display PWB
1. Screw ....................... (F1) x6
6-4
2. Frame Support ......... (F2) x1
3. Screw ....................... (F3) x6
3. Screw ....................... (F3) x6
7-1
4. Socket ...................... (F4) x2 6-4, 7-1
7
Headphones PWB 1. Screw ...................... (G1) x1
6-4
8
Switch PWB
1. Screw ...................... (H1) x1
7-1
9
CD Mechanism
1. Screw ....................... (J1) x6
7-1
10
Protect Circuit
1. Screw ...................... (K1) x4
7-2
PWB/1-Bit Amp.
2. Bracket .................... (K2) x2
Shield Case
3. Screw ...................... (K3) x3
11
1-Bit Amp. PWB
1. Screw ....................... (L1) x3
7-3
DISASSEMBLY
Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to
be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.
the unit, be sure to rearrange the leads where they were
before disassembling.
4. Take sufficient care on static electricity of integrated
circuits and other circuits when servicing.
Figure 6-2
STEP
REMOVAL
PROCEDURE
FIGURE
Figure 6-1
Figure 6-3
SD-EX200H
(A1)x4
ø3x10mm
ø3x10mm
(A1)x3
ø3x12mm
ø3x12mm
Rear
Cabinet
Cabinet
Front
Panel
(F4)x1
(F2)x1
(F1)x6
ø3x10mm
ø3x10mm
(G1)x1
ø3x10mm
ø3x10mm
Headphones
PWB
PWB
Front Panel
Figure 6-4
(B3)x1
ø3x8mm
ø3x8mm
Main PWB
Tuner Unit
Front Panel
(B4)x4
(B4)x3
(B5)x1
(B4)x1
(B2)x1
(B1)x4
ø3x10mm
ø3x10mm
(B3)x4
ø3x10mm
ø3x10mm
(B1)x1
ø3x8mm
ø3x8mm
1-Bit Amp.
Unit
Unit
(D2)x1
(C3)x1
(C1)x3
ø3x8mm
ø3x8mm
(E1)x2
ø3x10mm
ø3x10mm
(D1)x6
ø3x10mm
ø3x10mm
Power PWB
1-Bit Amp. Unit
(C2)x1
Front
Panel
Panel
– 7 –
SD-EX200H
Figure 7-2
Figure 7-1
Figure 7-3
(F4)x1
(F3)x6
ø3x10mm
ø3x10mm
(H1)x1
ø3x10mm
ø3x10mm
(J1)x4
ø2.6x10mm
(J1)x2
ø3x10mm
ø3x10mm
Display PWB
Front Panel
Switch PWB
CD Mechanism
Figure 7-4
(L1)x3
ø3x6mm
ø3x6mm
1-Bit Amp. PWB
1
Front Panel
1. Net Frame Ass'y ..... (A1) x1
7-4
2. Catching Holder ...... (A2) x4
3. Screw ...................... (A3) x4
3. Screw ...................... (A3) x4
2
Woofer
1. Screw ...................... (B1) x4
7-5
3
Tweeter
1. Screw ...................... (C1) x2
7-5
STEP
REMOVAL
PROCEDURE
FIGURE
CP-EX200H
Screwdriver
Driver should
be pried away
from Speaker Box.
be pried away
from Speaker Box.
(A1)x1
(A2)x4
Speaker Box
(A3)x4
ø4x16mm
ø4x16mm
Front Panel
Figure 7-5
(B1)x4
ø4x16mm
ø4x16mm
(C1)x2
ø3x10mm
ø3x10mm
Speaker Box
Woofer
Tweeter
(K3)x1
ø3x8mm
ø3x8mm
(K3)x1
ø3x8mm
ø3x8mm
(K3)x1
ø3x6mm
ø3x6mm
1-Bit Amp.
Shield Case
Shield Case
Protect
Circuit
PWB
Circuit
PWB
(K1)x2
ø3x6mm
ø3x6mm
(K2)x1
(K1)x2
ø3x8mm
ø3x8mm
SD-EX200H
– 8 –
Figure 8-1
Figure 8-2
REMOVING AND REINSTALLING THE MAIN PARTS
How to remove the pickup unit (See Fig. 8-1)
1. Remove the mechanism cover, paying attention to the
pawls (A1) x 4 pcs.
2. Remove the screws (A2) x 2 pcs., to remove the shaft
(A3) x 1 pc.
1. Remove the stop washer (A4) x 1 pc., to remove the gear
(A5) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
CD MECHANISM SECTION
Perform steps 1, 2, 3, 6 and 9 of the disassembly method to
remove the CD mechanism.
remove the CD mechanism.
Pickup Unit
(A2)x2
ø2.6x6mm
ø2.6x6mm
(A1)x4
CD Mechanism
Shaft
(A3)x1
(A3)x1
Gear
(A5)x1
(A5)x1
Stop Washer
(A4)x1
(A4)x1
CD Mechanism
Cover
Cover
How to Remove the CD door motor
(See Fig. 8-2.)
(See Fig. 8-2.)
1. Remove the screws (B1) x 2 pcs.
2. Remove the CD door motor.
2. Remove the CD door motor.
Caution:
Be careful not to damage the gear.
(If the gear is damaged, noise is heard when searching.)
Be careful not to damage the gear.
(If the gear is damaged, noise is heard when searching.)
(B1)x2
ø1.8x4mm
ø1.8x4mm
CD Door Gear Unit Ass'y
CD Door Motor
Click on the first or last page to see other SD-EX200 (serv.man19) service manuals if exist.