Sharp QT-CD210 User Manual / Operation Manual ▷ View online
<P=004>
COMPACT DISC OPERATION
■
CD playback
1
Set the function switch to CD.
2
Press the CD EJECT button to open the CD
compartment.
compartment.
3
Place a compact disc on the spindle, label side
up.
up.
●
8 cm (3") discs may be played without an adap-
tor.
tor.
4
Close the CD compartment by firmly pushing the
right corner of it.
right corner of it.
5
Press the PLAY/PAUSE button to start playback
from track 1.
from track 1.
6
Rotate the VOLUME control towards right to
increase the volume, and towards left to de-
crease the volume.
increase the volume, and towards left to de-
crease the volume.
ON/STAND-BY
(Function)
(Function)
PLAY /
PAUSE
PAUSE
STOP
CUE /
UP
UP
REVIEW /
DOWN
DOWN
2
3
4
To interrupt playback:
Press the PLAY/PAUSE button.
To resume playback:
Press the PLAY/PAUSE button.
To stop playback:
Press the STOP button.
Press the STOP button.
■
APSS (Auto Program Search System)
APSS automatically locates the beginning of any
track.
track.
To listen again to the track being played:
Press the DOWN button for less than 0.5 seconds
during playback.
Press the DOWN button for less than 0.5 seconds
during playback.
To move to the beginning of the next track:
Press the UP button for less than 0.5 seconds during
playback.
Press the UP button for less than 0.5 seconds during
playback.
Notes:
●
To skip a number of tracks at one time, press the
UP or DOWN button repeatedly until the desired
track number is shown.
UP or DOWN button repeatedly until the desired
track number is shown.
●
To start playback from a desired track, press the
UP or DOWN button whilst in the stop mode to
select the track number, and then press the
PLAY/PAUSE button.
UP or DOWN button whilst in the stop mode to
select the track number, and then press the
PLAY/PAUSE button.
■
Cue and review
1
Load a disc and begin playback.
2
Hold down the CUE button for audible fast for-
ward, and hold down the REVIEW button for
audible fast reverse.
3
Normal playback will resume when the REVIEW
or CUE button is released.
Notes:
●
When the end of the disc is reached whilst
cueing, "En" will appear in the display and CD
operation is paused. Press the REVIEW button
for fast reverse or press the STOP button to stop
CD operation.
cueing, "En" will appear in the display and CD
operation is paused. Press the REVIEW button
for fast reverse or press the STOP button to stop
CD operation.
●
If the beginning of the disc is reached whilst
reviewing, the mode will automatically switch to
normal playback at that point.
reviewing, the mode will automatically switch to
normal playback at that point.
Precautions:
●
When "Cd" or track number is displayed, the
power is connected.
If you will not be using the CD player, set the
ON/STAND-BY switch to STAND-BY.
power is connected.
If you will not be using the CD player, set the
ON/STAND-BY switch to STAND-BY.
●
Do not open the CD compartment whilst the
disc is rotating.
disc is rotating.
●
If the disc is damaged, dirty, or loaded upside
down, the total number of tracks will not
appear.
Clean, replace, or reload the disc properly.
down, the total number of tracks will not
appear.
Clean, replace, or reload the disc properly.
●
Keep foreign objects out of the CD compart-
ment.
ment.
●
Subjecting the unit to shock or vibration may
cause mistracking.
cause mistracking.
●
Keep the CD compartment closed except
when loading discs.
when loading discs.
●
Playing certain compact discs at a high vol-
ume may cause mistracking. In this case,
listen at a lower volume.
ume may cause mistracking. In this case,
listen at a lower volume.
●
The temperature range for playing compact
discs is recommended to be 5˚C (41˚F) - 35˚C
(95˚F).
discs is recommended to be 5˚C (41˚F) - 35˚C
(95˚F).
●
If TV or radio interference occurs during CD
operation, move the unit away from the TV or
radio.
operation, move the unit away from the TV or
radio.
QT-CD210H(SUK) TINSE0034SJZZ
4
TO
<P=001>
CASSETTE OPERATION
■
Tape playback
1
Set the function switch to TAPE.
2
Load the cassette into the cassette compart-
ment.
ment.
3
Press the PLAY button.
4
To advance the tape, press the STOP/EJECT
button, then press the F FWD button. To rewind,
press the STOP/EJECT button, then press the
REWIND button.
button, then press the F FWD button. To rewind,
press the STOP/EJECT button, then press the
REWIND button.
ON/STAND-BY
(Function)
(Function)
To interrupt playback:
Press the PAUSE button during playback.
Press the PAUSE button again to resume playback.
Press the PAUSE button again to resume playback.
To stop playback:
Press the STOP/EJECT button.
Precautions:
●
Be sure not to press the PLAY and REWIND
buttons simultaneously, or the tape will become
damaged.
buttons simultaneously, or the tape will become
damaged.
●
Before changing from one tape operation to an-
other, press the STOP/EJECT button.
other, press the STOP/EJECT button.
●
Do not press the PAUSE button whilst the fast
forward or rewind operations are in progress.
The F FWD or REWIND button will not be re-
leased when the tape end is reached. Once this
occurs, press the STOP/EJECT button.
forward or rewind operations are in progress.
The F FWD or REWIND button will not be re-
leased when the tape end is reached. Once this
occurs, press the STOP/EJECT button.
RECORDING
●
When recording important selections, be sure to
make a preliminary test to ensure that the desired
material is being properly recorded.
make a preliminary test to ensure that the desired
material is being properly recorded.
●
The ALC (Automatic Record Level Control) cir-
cuit automatically controls the level of the input
signal used for recording.
cuit automatically controls the level of the input
signal used for recording.
●
The VOLUME control may be adjusted with no
effect on the recorded signal. (Variable Sound
Monitor)
effect on the recorded signal. (Variable Sound
Monitor)
●
Metal and CrO
2
tapes cannot be used for recor-
ding.
ON/STAND-BY
(Function)
(Function)
PLAY /
PAUSE
PAUSE
TUNING
STOP
■
Recording from the built-in CD player
1
Set the function switch to CD.
●
Load the disc to be recorded.
2
Load the cassette into the cassette compart-
ment.
ment.
3
Press the RECORD button.
4
Press the PLAY/PAUSE button on the CD.
To stop recording:
Press the STOP/EJECT button.
The tape will stop.
Press the STOP/EJECT button.
The tape will stop.
Note:
●
If the STOP or PLAY/PAUSE button on the CD
player is pressed whilst recording, or if the CD
comes to its end, the tape deck will not stop.
player is pressed whilst recording, or if the CD
comes to its end, the tape deck will not stop.
To record a specific track:
Press the UP or DOWN button on the CD player until
the desired track number is displayed, then start
recording.
Press the UP or DOWN button on the CD player until
the desired track number is displayed, then start
recording.
QT-CD210H(SUK) TINSE0034SJZZ
5
<P=002>
(Continued)
■
Recording from the built-in radio
1
Set the function switch to AM or FM.
●
Tune in to the station to be recorded.
2
Load a blank cassette into the cassette compart-
ment.
ment.
3
Press the PAUSE button.
4
Press the RECORD button.
5
Press the PAUSE button again.
To stop recording:
Press the STOP/EJECT button.
Press the STOP/EJECT button.
■
Erasing a recorded tape
1
Set the function switch to TAPE.
2
Load the tape to be erased into the cassette
compartment.
compartment.
3
Press the RECORD button.
HEADPHONES
●
Before plugging in or unplugging the head-
phones, make sure the volume level is reduced.
phones, make sure the volume level is reduced.
●
Be sure your headphones have a 3.5 mm (1/8")
diameter plug and are between 16 ohms and 50
ohms impedance. The recommended imped-
ance is 32 ohms.
diameter plug and are between 16 ohms and 50
ohms impedance. The recommended imped-
ance is 32 ohms.
●
Connect the headphones plug to the PHONES
socket. The speakers will be automatically dis-
connected. Adjust the volume by using the VOL-
UME control.
socket. The speakers will be automatically dis-
connected. Adjust the volume by using the VOL-
UME control.
MAINTENANCE
■
Internal care
●
Do not touch the Laser pickup lens. If fingerprints
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
●
Dirty heads, capstan or pinch roller can cause
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
●
After long use, the deck’s heads and capstan
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording by using a commercial tape
head demagnetiser. Read the demagnetiser’s
instructions carefully before use.
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording by using a commercial tape
head demagnetiser. Read the demagnetiser’s
instructions carefully before use.
■
External care
●
Periodically wipe the cabinet with a soft cloth and
a diluted soap solution, then wipe with a dry cloth.
a diluted soap solution, then wipe with a dry cloth.
●
Do not use chemically treated cleaning cloths or
other chemicals.
other chemicals.
QT-CD210H(SUK) TINSE0034SJZZ
6
<P=003>
SPECIFICATIONS
●
General
Power source: AC 230-240 V, 50 Hz
DC 9 V
[
"D" size (UM/SUM-1, R20
or HP-2) battery
×
6
]
Power
consumption: 8 W
Output power: MPO; 8.4 W (4.2 W + 4.2 W)
consumption: 8 W
Output power: MPO; 8.4 W (4.2 W + 4.2 W)
(AC operation, 10 % T.H.D.)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, 10 % T.H.D.)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, 10 % T.H.D.)
Speakers:
10 cm (4") full-range speaker x 2
Output
terminals:
terminals:
Headphones; 16-50 ohms
(recommended; 32 ohms)
(recommended; 32 ohms)
Dimensions:
Width; 400 mm (15-3/4")
Height; 158 mm (6-1/4")
Depth; 212 mm (8-3/8")
Height; 158 mm (6-1/4")
Depth; 212 mm (8-3/8")
Weight:
●
Radio
Frequency
range:
range:
FM; 87.5 - 108 MHz
AM; 526.5 - 1,606.5 kHz
AM; 526.5 - 1,606.5 kHz
●
Tape recorder
Frequency
response:
response:
50 - 14,000 Hz (Normal tape)
Signal/noise
ratio:
ratio:
50 dB
Wow and
flutter:
flutter:
0.25 % (WRMS)
Motor:
DC 9 V electric governor
AC bias
Erase system: Magnet erase
●
Compact disc player
Type:
Compact disc
Signal
readout:
readout:
Non-contact, 3-beam semi-
conductor laser pickup
conductor laser pickup
Audio
channels:
channels:
2
Filter:
8-times oversampling digital filter
D/A converter: 1-bit D/A converter
Wow and
flutter:
Wow and
flutter:
Unmeasurable
(less than 0.001% W. peak)
(less than 0.001% W. peak)
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
9906
TINSE0046SJZZ
A0003.TO
TERMS OF GUARANTEE
1.
2.
3.
4.
5.
5.
6.
7.
Sharp Customer Information Centre - Telephone 0345 125387
This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not
cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with the product,
or repair other than by a Service Facility appointed by Sharp.
cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with the product,
or repair other than by a Service Facility appointed by Sharp.
As this product is intended for private domestic use only, the guarantee will not apply if the product is used
in the course of a business, trade or profession.
in the course of a business, trade or profession.
To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed Service
Facility within one year from the date this product was purchased. Proof of purchase must be provided.
Facility within one year from the date this product was purchased. Proof of purchase must be provided.
This guarantee is offered as an additional benefit to your statutory rights, and does not affect these rights
in any way.
in any way.
In the unlikely event of this product requiring repair, please contact the supplier from whom it was purchased.
Where this is not possible, please contact the Sharp Customer Information Centre on the telephone number
given below.
Where this is not possible, please contact the Sharp Customer Information Centre on the telephone number
given below.
The guarantee does not cover carriage costs, jewelled styli, audio tapes, compact discs or batteries.
No person has any authority to vary the terms or conditions of this guarantee.
Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replacement, of
this product subject to the conditions listed below:-
this product subject to the conditions listed below:-
If you have any difficulty operating this product, or would like information on other Sharp products, please
telephone the Sharp Customer Information Centre on the number given below.
telephone the Sharp Customer Information Centre on the number given below.
QT-CD210H/QT-CD220H(SUK) TINSE0046SJZZ
Display
