Sharp QT-CD161H User Manual / Operation Manual ▷ View online
<P=003>
RECORDING
●
When recording important selections, be sure to
make a preliminary test to ensure that the
desired material is being properly recorded.
make a preliminary test to ensure that the
desired material is being properly recorded.
●
The ALC (Automatic Record Level Control) cir-
cuit automatically controls the level of the input
signal used for recording.
cuit automatically controls the level of the input
signal used for recording.
●
The VOLUME and X-BASS controls may be
adjusted with no effect to the recorded signal.
(Variable Sound Monitor)
adjusted with no effect to the recorded signal.
(Variable Sound Monitor)
●
Metal and CrO
2
tapes cannot be used for recor-
ding.
■
Recording from the built-in CD player
1
Set the function switch to CD.
●
Load the disc to be recorded.
2
Load the cassette into the cassette compart-
ment.
ment.
3
Press the RECORD button.
4
Press the PLAY/REPEAT (
0 R
) button on the
CD.
Notes:
●
If the STOP button on the CD player is pressed
whilst recording, or if the CD comes to its end,
the tape deck will not stop.
whilst recording, or if the CD comes to its end,
the tape deck will not stop.
STOP/EJECT
F FWD
REWIND
PLAY
RECORD
PAUSE
POWER
PLAY/REPEAT /
TUNING
TUNING
STOP
TUNING
TUNING
PAUSE
BAND
BAND
To record a specific track:
Press the
4
or
5
button on the CD player until
the desired track number is displayed, then start
recording.
recording.
■
Recording from the built-in radio
1
Set the function switch to TUNER.
●
Tune in to the station to be recorded.
2
Load a blank cassette into the cassette compart-
ment.
ment.
3
Press the PAUSE button.
4
Press the RECORD button.
5
Press the PAUSE button again.
■
Erasing a recorded tape
1
Set the function switch to TAPE.
2
Load the tape to be erased into the cassette
compartment.
compartment.
3
Press the RECORD button.
MAINTENANCE
■
Internal care
●
Do not touch the Laser pickup lens. If fingerprints
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
●
Dirty heads, capstan or pinch roller can cause
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
●
After long use, the deck’s heads and capstan
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording by using a commercial tape
head demagnetiser. Read the demagnetiser’s
instructions carefully before use.
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording by using a commercial tape
head demagnetiser. Read the demagnetiser’s
instructions carefully before use.
■
External care
●
Periodically wipe the cabinet with a soft cloth and
a diluted soap solution, then wipe with a dry
cloth.
a diluted soap solution, then wipe with a dry
cloth.
●
Do not use chemically treated cleaning cloths or
other chemicals.
other chemicals.
QT-CD161H(SUK) TINSE0026SJZZ
8
<P=004>
SPECIFICATIONS
●
General
Power source:
AC 230 - 240 V, 50 Hz
DC 12 V
DC 12 V
[
"D" size (UM/SUM-1, R20 or HP-2)
battery
×
8
]
DC 3 V
[
"AA" size (UM/SUM-3, R6 or HP-7)
battery
×
2 for tuner memory
]
Power
consumption:
consumption:
20 W
Output power:
MPO (Max.); 8.4 W (4.2 W + 4.2 W)
(AC operation)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, 10 % T.H.D.)
(AC operation)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, 10 % T.H.D.)
Speakers:
10 cm (4") full-range speaker x 2
Output terminals:
Headphones; 16-50 ohms
(recommended; 32 ohms)
(recommended; 32 ohms)
Dimensions:
Width; 480 mm (18-15/16")
Height; 153 mm (6-1/16")
Depth; 254 mm (10")
Height; 153 mm (6-1/16")
Depth; 254 mm (10")
Weight:
●
Radio
Frequency range:
FM; 87.5 - 108 MHz
AM; 522 - 1,620 kHz
AM; 522 - 1,620 kHz
●
Tape recorder
Frequency
response:
response:
50 - 14,000 Hz (Normal tape)
Signal/noise ratio: 50 dB
Wow and flutter:
Wow and flutter:
0.25 % (WRMS)
Motor:
DC 12 V electric governor
AC bias
Magnet erase
●
Compact disc player
Type:
Compact disc
Signal readout:
Non-contact, 3-beam semi-
conductor laser pickup
conductor laser pickup
Audio channels:
2
Quantization:
16-bit linear quantization
Filter:
4-times oversampling digital filter
D/A converter:
1-bit D/A converter
Wow and flutter:
Unmeasurable
(less than 0.001% W. peak)
(less than 0.001% W. peak)
TINSE0026SJZZ
A9903.TO
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. ("Sharp") guarantees to provide for the repair, or at its option the
replacement, of this product subject to the conditions listed below:-
replacement, of this product subject to the conditions listed below:-
1.
This guarantee shall only apply to faults which are due to inferior workmanship or materials.
It does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect,
tampering with the product, or repair other than by a Service Facility appointed by Sharp.
It does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect,
tampering with the product, or repair other than by a Service Facility appointed by Sharp.
2.
As this product is intended for private domestic use only, the guarantee will not apply if the
product is used in the course of a business, trade or profession.
product is used in the course of a business, trade or profession.
3.
To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its
appointed Service Facility within one year from the date this product was purchased. Proof
of purchase must be provided.
appointed Service Facility within one year from the date this product was purchased. Proof
of purchase must be provided.
4.
The guarantee does not cover carriage costs, jewelled styli, audio tapes, compact discs or
batteries.
batteries.
5.
In the unlikely event of this product requiring repair, please contact the supplier from whom it
was purchased. Where this is not possible, please contact the Sharp Customer Information
Centre on the telephone number given below.
was purchased. Where this is not possible, please contact the Sharp Customer Information
Centre on the telephone number given below.
6.
No person has any authority to vary the terms or conditions of this guarantee.
7.
This guarantee is offered as an additional benefit to your statutory rights, and does not affect
these rights in any way.
these rights in any way.
If you have any difficulty operating this product, or would like information on other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.
please telephone the Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 0345 125387
QT-CD161H(SUK) TINSE0026SJZZ
<P=004>
SPECIFICATIONS
●
General
Power source:
AC 230 - 240 V, 50 Hz
DC 12 V
DC 12 V
[
"D" size (UM/SUM-1, R20 or HP-2)
battery
×
8
]
DC 3 V
[
"AA" size (UM/SUM-3, R6 or HP-7)
battery
×
2 for tuner memory
]
Power
consumption:
consumption:
20 W
Output power:
MPO (Max.); 8.4 W (4.2 W + 4.2 W)
(AC operation)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, 10 % T.H.D.)
(AC operation)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, 10 % T.H.D.)
Speakers:
10 cm (4") full-range speaker x 2
Output terminals:
Headphones; 16-50 ohms
(recommended; 32 ohms)
(recommended; 32 ohms)
Dimensions:
Width; 480 mm (18-15/16")
Height; 153 mm (6-1/16")
Depth; 254 mm (10")
Height; 153 mm (6-1/16")
Depth; 254 mm (10")
Weight:
●
Radio
Frequency range:
FM; 87.5 - 108 MHz
AM; 522 - 1,620 kHz
AM; 522 - 1,620 kHz
●
Tape recorder
Frequency
response:
response:
50 - 14,000 Hz (Normal tape)
Signal/noise ratio: 50 dB
Wow and flutter:
Wow and flutter:
0.25 % (WRMS)
Motor:
DC 12 V electric governor
AC bias
Magnet erase
●
Compact disc player
Type:
Compact disc
Signal readout:
Non-contact, 3-beam semi-
conductor laser pickup
conductor laser pickup
Audio channels:
2
Quantization:
16-bit linear quantization
Filter:
4-times oversampling digital filter
D/A converter:
1-bit D/A converter
Wow and flutter:
Unmeasurable
(less than 0.001% W. peak)
(less than 0.001% W. peak)
TINSE0026SJZZ
A9903.TO
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. ("Sharp") guarantees to provide for the repair, or at its option the
replacement, of this product subject to the conditions listed below:-
replacement, of this product subject to the conditions listed below:-
1.
This guarantee shall only apply to faults which are due to inferior workmanship or materials.
It does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect,
tampering with the product, or repair other than by a Service Facility appointed by Sharp.
It does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect,
tampering with the product, or repair other than by a Service Facility appointed by Sharp.
2.
As this product is intended for private domestic use only, the guarantee will not apply if the
product is used in the course of a business, trade or profession.
product is used in the course of a business, trade or profession.
3.
To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its
appointed Service Facility within one year from the date this product was purchased. Proof
of purchase must be provided.
appointed Service Facility within one year from the date this product was purchased. Proof
of purchase must be provided.
4.
The guarantee does not cover carriage costs, jewelled styli, audio tapes, compact discs or
batteries.
batteries.
5.
In the unlikely event of this product requiring repair, please contact the supplier from whom it
was purchased. Where this is not possible, please contact the Sharp Customer Information
Centre on the telephone number given below.
was purchased. Where this is not possible, please contact the Sharp Customer Information
Centre on the telephone number given below.
6.
No person has any authority to vary the terms or conditions of this guarantee.
7.
This guarantee is offered as an additional benefit to your statutory rights, and does not affect
these rights in any way.
these rights in any way.
If you have any difficulty operating this product, or would like information on other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.
please telephone the Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 0345 125387
QT-CD161H(SUK) TINSE0026SJZZ
<P=004>
SPECIFICATIONS
●
General
Power source:
AC 230 - 240 V, 50 Hz
DC 12 V
DC 12 V
[
"D" size (UM/SUM-1, R20 or HP-2)
battery
×
8
]
DC 3 V
[
"AA" size (UM/SUM-3, R6 or HP-7)
battery
×
2 for tuner memory
]
Power
consumption:
consumption:
20 W
Output power:
MPO (Max.); 8.4 W (4.2 W + 4.2 W)
(AC operation)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, 10 % T.H.D.)
(AC operation)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, 10 % T.H.D.)
Speakers:
10 cm (4") full-range speaker x 2
Output terminals:
Headphones; 16-50 ohms
(recommended; 32 ohms)
(recommended; 32 ohms)
Dimensions:
Width; 480 mm (18-15/16")
Height; 153 mm (6-1/16")
Depth; 254 mm (10")
Height; 153 mm (6-1/16")
Depth; 254 mm (10")
Weight:
●
Radio
Frequency range:
FM; 87.5 - 108 MHz
AM; 522 - 1,620 kHz
AM; 522 - 1,620 kHz
●
Tape recorder
Frequency
response:
response:
50 - 14,000 Hz (Normal tape)
Signal/noise ratio: 50 dB
Wow and flutter:
Wow and flutter:
0.25 % (WRMS)
Motor:
DC 12 V electric governor
AC bias
Magnet erase
●
Compact disc player
Type:
Compact disc
Signal readout:
Non-contact, 3-beam semi-
conductor laser pickup
conductor laser pickup
Audio channels:
2
Quantization:
16-bit linear quantization
Filter:
4-times oversampling digital filter
D/A converter:
1-bit D/A converter
Wow and flutter:
Unmeasurable
(less than 0.001% W. peak)
(less than 0.001% W. peak)
TINSE0026SJZZ
A9903.TO
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. ("Sharp") guarantees to provide for the repair, or at its option the
replacement, of this product subject to the conditions listed below:-
replacement, of this product subject to the conditions listed below:-
1.
This guarantee shall only apply to faults which are due to inferior workmanship or materials.
It does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect,
tampering with the product, or repair other than by a Service Facility appointed by Sharp.
It does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect,
tampering with the product, or repair other than by a Service Facility appointed by Sharp.
2.
As this product is intended for private domestic use only, the guarantee will not apply if the
product is used in the course of a business, trade or profession.
product is used in the course of a business, trade or profession.
3.
To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its
appointed Service Facility within one year from the date this product was purchased. Proof
of purchase must be provided.
appointed Service Facility within one year from the date this product was purchased. Proof
of purchase must be provided.
4.
The guarantee does not cover carriage costs, jewelled styli, audio tapes, compact discs or
batteries.
batteries.
5.
In the unlikely event of this product requiring repair, please contact the supplier from whom it
was purchased. Where this is not possible, please contact the Sharp Customer Information
Centre on the telephone number given below.
was purchased. Where this is not possible, please contact the Sharp Customer Information
Centre on the telephone number given below.
6.
No person has any authority to vary the terms or conditions of this guarantee.
7.
This guarantee is offered as an additional benefit to your statutory rights, and does not affect
these rights in any way.
these rights in any way.
If you have any difficulty operating this product, or would like information on other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.
please telephone the Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 0345 125387
QT-CD161H(SUK) TINSE0026SJZZ
