Sharp QT-CD121H User Manual / Operation Manual ▷ View online
YT
<P=001>
Sound control
●
Volume
VOLUME
ON
OFF
OFF
X-BASS
ON
OFF
OFF
SURROUND
●
X-BASS
●
Surround
Surround
"Surround" refers to an acoustical effect simi-
lar to the ambience of a concert hall, where
the listener has the feeling of being "sur-
rounded" by the sound.
lar to the ambience of a concert hall, where
the listener has the feeling of being "sur-
rounded" by the sound.
To enjoy the surround effect:
Set the SURROUND switch to ON.
Note:
●
The sound effect cannot be obtained from
monaural (mono) sound.
monaural (mono) sound.
Headphones
●
To PHONES
●
Be sure your headphones
have a 3.5 mm (1/8")
diameter plug and are be-
tween 16 ohms and 50
ohms impedance. The
recommended impedance
is 32 ohms.
have a 3.5 mm (1/8")
diameter plug and are be-
tween 16 ohms and 50
ohms impedance. The
recommended impedance
is 32 ohms.
After use:
Set the FUNCTION switch to
STAND-BY.
STAND-BY.
ON
STAND-BY
FUNCTION
TAPE
CD
AM
FM
AUTO
X-BASS
SURROUND
FUNCTION /
STAND-BY
STAND-BY
E
ON
VOLUME
TUNING
PHONES
REAR OF
THE UNIT
REVIEW/
DOWN
DOWN
STOP
CUE
UP
UP
PLAY
@
/
REPEAT
STOP/EJECT
F FWD
REWIND
PLAY
RECORD
PAUSE
CD EJECT
REVIEW/
DOWN
DOWN
(CD)
(CD) PAUSE
PLAY /
REPEAT
REPEAT
(CD)
CUE /
UP
UP
(CD)
STOP
(CD)
QT-CD121H(SUK) TINSE0004SJZZ
4
<P=002>
CD playback
1
Set the FUNCTION
switch to CD.
switch to CD.
●
"Cd" will be displayed.
2
Load a CD.
Open
Label facing up
Close
●
The total number of tracks will be
displayed.
displayed.
3
Press the
PLAY/REPEAT
(
PLAY/REPEAT
(
0R
) button.
●
"
0
" will ap pear
and playback will
begin from track 1.
begin from track 1.
ON
STAND-BY
FUNCTION
TAPE
CD
AM
FM
AUTO
CD EJECT
PUSH CLOSE
PLAY /
REPEAT
To stop playback
STOP
CD operation
Main unit
Remote control
To interrupt
playback
playback
To resume
playback
playback
PLAY /
REPEAT
Note:
●
When "Cd" or track number is displayed, the
power is connected.
If you will not be using the CD player, set the
FUNCTION switch to STAND-BY.
power is connected.
If you will not be using the CD player, set the
FUNCTION switch to STAND-BY.
Precautions:
●
Do not open the CD compartment whilst the disc
is rotating.
is rotating.
●
If the disc is damaged, dirty, or loaded upside
down, the total number of tracks will not appear.
Clean, replace, or reload the disc properly.
down, the total number of tracks will not appear.
Clean, replace, or reload the disc properly.
●
Keep foreign objects out of the CD compartment.
●
Subjecting the unit to shock or vibration may
cause mistracking.
cause mistracking.
●
Keep the CD compartment closed except when
loading discs.
loading discs.
●
Playing certain compact discs at a high volume
may cause mistracking. In this case, listen at a
lower volume.
may cause mistracking. In this case, listen at a
lower volume.
●
The temperature range for playing compact
discs is recommended to be 5˚C (41˚F) - 35˚C
(95˚F).
discs is recommended to be 5˚C (41˚F) - 35˚C
(95˚F).
●
If TV or radio interference occurs during CD
operation, move the unit away from the TV or
radio.
operation, move the unit away from the TV or
radio.
■
Repeat play
To repeat all
of the tracks
on the disc
of the tracks
on the disc
Main unit
Remote control
PLAY /
REPEAT
During playback,
Press
PLAY /
REPEAT
Press
again
again
T o c a n c e l
repeat play
repeat play
During playback,
Press
Press
again
again
QT-CD121H(SUK) TINSE0004SJZZ
5
<P=003>
■
APSS (Auto Program Search System)
To move to
t h e be g i n-
ning of the
next track
t h e be g i n-
ning of the
next track
Main unit
Remote control
During playback,
To listen to
t h e tra c k
being played
again
t h e tra c k
being played
again
During playback,
During playback,
During playback,
●
To skip a number of tracks at one time, press the
UP (
UP (
2 / 4
) or DOWN (
3 / 5
) button re-
peatedly until the desired track number is shown.
●
To start playback from a desired track, press the
UP (
UP (
2 / 4
) or DOWN (
3 / 5
) button whilst
in the stop mode to select the track number, and
then press the PLAY/REPEAT (
then press the PLAY/REPEAT (
0 R
) button.
■
Cue and review
T o fa s t
forward
audibly
forward
audibly
Main unit
Remote control
CUE UP
During playback,
T o f a s t
reverse
audibly
reverse
audibly
DOWN REVIEW
Notes:
●
If the end of the disc is reached whilst cueing, the
CD will pause. Press the
CD will pause. Press the
3
REVIEW (
3
/
5
)
button for fast reverse or press the STOP (
■
)
button to stop CD operation.
●
If the beginning of the track is reached whilst
reviewing, the mode will automatically switch to
normal playback at that point.
reviewing, the mode will automatically switch to
normal playback at that point.
hold
During playback,
hold
During playback,
hold
During playback,
hold
CUE UP
DOWN REVIEW
Tape playback
1
Set the FUNCTION
switch to TAPE.
switch to TAPE.
2
Load the cassette into the cassette
compartment.
compartment.
3
Press the PLAY
button.
button.
To stop playback
To rewind the tape
To advance the
tape
tape
To interrupt
playback
playback
To resume
playback
playback
Precautions:
●
Be sure not to press the PLAY and REWIND
buttons simultaneously, or the tape will become
damaged.
buttons simultaneously, or the tape will become
damaged.
●
Before changing from one tape operation to an-
other, press the STOP/EJECT button.
other, press the STOP/EJECT button.
●
Do not press the PAUSE button whilst the fast
forward or rewind operations are in progress.
The F FWD or REWIND button will not be re-
leased when the tape end is reached. Once this
occurs, press the STOP/EJECT button.
forward or rewind operations are in progress.
The F FWD or REWIND button will not be re-
leased when the tape end is reached. Once this
occurs, press the STOP/EJECT button.
When stopped,
When stopped,
ON
STAND-BY
FUNCTION
TAPE
CD
AM
FM
AUTO
STOP/EJECT
PLAY
STOP/EJECT
REWIND
F FWD
PAUSE
PAUSE
QT-CD121H(SUK) TINSE0004SJZZ
6
YT
<P=001>
1
Set the FUNCTION
switch to AM or FM
AUTO.
switch to AM or FM
AUTO.
2
Us e t he TUN I NG
control to tune in to
the desired station.
control to tune in to
the desired station.
Aerial adjustment
Radio operation
ON
STAND-BY
FUNCTION
TAPE
CD
AM
FM
AUTO
TUNING
FM
AM
●
The built-in FM AUTO function auto-
matically changes reception to mon-
aural if the signal is weak during FM
stereo reception.
matically changes reception to mon-
aural if the signal is weak during FM
stereo reception.
Recording from the CD
1
Set the FUNCTION
switch to CD.
switch to CD.
●
Load the disc to be
recorded.
recorded.
2
Load a blank cassette
into the cassette com-
partment.
into the cassette com-
partment.
3
Press the
RECORD
button.
RECORD
button.
4
Press the
PLAY/REPEAT
(
PLAY/REPEAT
(
0R
) button on
the CD.
ON
STAND-BY
FUNCTION
TAPE
CD
AM
FM
AUTO
STOP/EJECT
RECORD
PLAY /
REPEAT
To stop recording:
Press the STOP/EJECT button.
Note:
●
If the STOP (
■
) button on the CD player is
pressed whilst recording, or if the CD comes to
its end, the tape deck will not stop.
its end, the tape deck will not stop.
To record a specific track:
Press the UP (
Press the UP (
2 / 4
) or DOWN (
3 / 5
) button
on the CD player until the desired track number is
displayed, then start recording.
displayed, then start recording.
Before recording:
●
When recording important selections, be sure to
make a preliminary test to ensure that the desired
material is being properly recorded.
make a preliminary test to ensure that the desired
material is being properly recorded.
●
The ALC (Automatic Record Level Control) cir-
cuit automatically controls the level of the input
signal used for recording.
cuit automatically controls the level of the input
signal used for recording.
●
The VOLUME, SURROUND and X-BASS con-
trols may be adjusted with no effect to the re-
corded signal. (Variable Sound Monitor)
trols may be adjusted with no effect to the re-
corded signal. (Variable Sound Monitor)
●
Metal and CrO
2
tapes cannot be used for recor-
ding.
QT-CD121H(SUK) TINSE0004SJZZ
7
Click on the first or last page to see other QT-CD121H service manuals if exist.