DOWNLOAD Sharp HT-SB32D (serv.man2) Service Manual ↓ Size: 2.75 MB | Pages: 22 in PDF or view online for FREE

14G R AS 

1

Note: This product is recommended for flat panel TV (LED, LCD and plasma).

TINSEA473AWZZ

The Bluetooth

 word mark and logos are registered trademarks owned by 

Bluetooth SIG, Inc. and any use of such marks by SHARP is under license. Other 

trademarks and trade names are those of their respective owners.
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the 

United States and in other countries.
Manufactured under license from Dolby Laboratories. Dolby and the double-D 

symbol are trademarks of Dolby Laboratories.

 Barcode Symbology:  Code 93 ;     Font Facename:  Code93MHr

 Data To Encode:  TINSEA473AWZZ

 Point Size 8 :    

 *TINSEA473AWZZD$*|

 Point Size 10 :    

 *TINSEA473AWZZD$*|

 Point Size 12 :    

 *TINSEA473AWZZD$*|

 Point Size 14 :    

 *TINSEA473AWZZD$*|

RRMCG

A322AW

SA

Thank you for purchasing this SHARP product. To obtain the best performance 

from this product, please read this manual carefully. It will guide you in operating 

your SHARP product.

The following accessories are included.

RRMCG

A322A

WSA

Remote control x 1

AC/DC adaptor x 1

(RADPA100AWZZ)

AC power lead x 1

Optical cable x 1

Pattern paper x 1

NFC tag x 1

Velcro tape 

(hook type) x 1

Velcro tape 

(loop type) x 2

Spike leg x 2

 

●

Hereby,  SHARP  ELECTRONICS 

declares that this SHARP Sound Bar 

Home Theatre  System    HT-SB32D 

is  in  compliance  with  the  essential 

requirements  and  other  relevant 

provisions  of  Directive  1999/5/EC. 

The declaration of conformity may be 

consulted at: 

http://www.sharp.de/doc/HT-SB32D.pdf

Warning:
●

 When the ON/STANDBY button is set 
at STANDBY position, mains voltage 
is still present inside the unit. When the 
ON/STANDBY button is set at STANDBY 
position, the unit may be brought into 
operation by the remote control.

●

 This unit contains no user serviceable 
parts. Never remove covers unless 
qualified to do so. This unit contains 
dangerous voltages, always remove 
mains plug from the socket before any 
service operation and when not in use 
for a long period.

●

To prevent fire or shock hazard, do not 
expose this appliance to dripping or 
splashing. No objects filled with liquids, 
such as vases, shall be placed on the 
apparatus.

■

 

●

Keep your equipment at least 10 cm 

of free space along the sides, top 

and back for proper ventilation.

10 cm

10 cm

10 cm

 

●

Use the unit on a firm, level surface 

free from vibration.

 

●

Keep the unit away from direct 

sunlight, strong magnetic fields, 

excessive dust, humidity and elec-

tronic/electrical equipment (home 

computers, facsimiles, etc.) which 

generate electrical noise.

 

●

Do not place anything on top of the 

unit.

 

●

Do not expose the unit to moisture, 

to temperatures higher than 60°C 

(140°F) or to extremely low tem-

peratures.

 

●

If the unit does not work properly, 

unplug and plug it in again. Then 

turn on the unit.

 

●

In case of an electrical storm, un-

plug the unit for safety.

 

●

Hold the AC power plug by the 

head when removing it from the wall 

socket, as pulling the lead can dam-

age internal wires.

 

●

The AC power plug is used as a 

disconnect device and shall always 

remain readily operable.

●

 

●

The ventilation should not be im-

peded by covering the ventilation 

openings with items, such as news-

papers, tablecloths, curtains, etc.

 

●

No naked flame sources, such as 

lighted candles, should be placed 

on the apparatus.

 

●

Attention should be drawn to the 

environmental aspects of battery 

disposal.

 

●

This unit should only be used within 

the range of 5°C - 35°C (41°F - 

95°F).

 

●

The apparatus is designed for use in 

moderate climates.

 

●

SHARP is not responsible for dam-

age due to improper use. Refer all 

servicing to a SHARP authorised 

service centre.

 

●

The supplied AC/DC adaptor con-

tains no user serviceable parts. 

Never remove covers unless quali-

fied to do so. It contains dangerous 

voltages, always remove mains plug 

from the main outlet socket before 

any service operation or when not 

in use for a long period.

 

●

The AC/DC adaptor supplied with 

the HT-SB32D must not be used 

with other equipment.

 

●

Never use an AC/DC adaptor other 

than the one specified. Otherwise, 

problem or serious hazards may be 

created.

 

●

The voltage used must be the same 

as that specified on this unit. Using 

a higher voltage is dangerous and 

may result in a fire or other type of 

accident causing damage. SHARP 

will not be held responsible for any 

damage resulting from such usage.

 

●

In case of repairing, please bring 

the entire system set to the service 

centre.

■

The sound level at a given volume 

setting depends on speaker efficiency, 

location and various other factors. 

It is advisable to avoid exposure to 

high volume levels, which occurs 

while turning the unit on with the 

volume control setting up high, or while 

continually listening at high volumes.

1.  Left Channel Speakers

2.  Right Channel Speakers

3.  On/Standby/Input Indicator

4.  On/Standby Button

5.  Input Button

6.  Pairing Button

7.  Pairing Indicator

8.  Surround Indicator

9.  Surround Button

10.  Volume Down Button

11.  Volume Up Button

12.  Audio Format Indicator

13.  Remote Sensor

14.  NFC detection area

1.  DC In Socket

2.  Optical In Socket

3.  Audio In Socket

■

■