Sharp HT-SB200 User Manual / Operation Manual ▷ View online
17
HT-SB200
2008 December 16
HT-SB200_A6_EN.fm
Ref
erences
Maintenance
■
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth.
Caution:
●
Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet finish.
etc.). It may damage the cabinet finish.
●
Do not apply oil to the inside of each component. It may
cause malfunctions.
cause malfunctions.
Error indicators and warnings
When you fail to perform operations properly, the following
messages are displayed on the speaker.
messages are displayed on the speaker.
(*): Should the same message appear even if the speaker is
unplugged and plugged in or is set to the stand-by mode
and on again, contact your local dealer where you
purchased the speaker.
and on again, contact your local dealer where you
purchased the speaker.
Display
Meaning
●
Malfunction of the surround
circuit. Place the speaker away
from noise source and plug the
AC power lead into another wall
socket. (*)
circuit. Place the speaker away
from noise source and plug the
AC power lead into another wall
socket. (*)
or
or
Power indicator (blinks red)
●
When the protection circuit of the
amplifier is activated.
amplifier is activated.
18
HT-SB200
2008 December 16
HT-SB200_A6_EN.fm
Ref
erences
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
speaker. There may be some deviations from these values in
individual speaker.
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
speaker. There may be some deviations from these values in
individual speaker.
■ General
(*) This power consumption value is obtained when in the
power stand-by mode.
Power source
DC IN 12V
4A: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
Power
consumption
consumption
Power on: 10 W
Power stand-by: 0.6 W (*)
Power stand-by: 0.6 W (*)
Output power
Front speaker:
RMS: 12 W (6 W + 6 W) (10% T.H.D.)
RMS: 9.6 W (4.8 W + 4.8 W) (0.9% T.H.D.)
RMS: 12 W (6 W + 6 W) (10% T.H.D.)
RMS: 9.6 W (4.8 W + 4.8 W) (0.9% T.H.D.)
Subwoofer:
RMS: 20 W (10% T.H.D.)
RMS: 13 W (0.9% T.H.D.)
RMS: 20 W (10% T.H.D.)
RMS: 13 W (0.9% T.H.D.)
Speaker
2.1-way Speaker System
Front Speakers: 38 mm (1-1/2") Full
Range
Subwoofer: 57 mm (2-1/4") Woofer (x4)
Front Speakers: 38 mm (1-1/2") Full
Range
Subwoofer: 57 mm (2-1/4") Woofer (x4)
Audio output
terminals
terminals
Speakers: 12 ohms/channel
Subwoofer: 3 ohms
(12 ohms x 4 parallel connection)
Subwoofer: 3 ohms
(12 ohms x 4 parallel connection)
Input terminals
Analogue input (LINE 1):
RCA type x 1pair (L/R)
500 mV / 47 kohms
RCA type x 1pair (L/R)
500 mV / 47 kohms
Analogue input (LINE 2):
Stereo mini socket Ø 3.5 mm
100 mV / 47 kohms
Stereo mini socket Ø 3.5 mm
100 mV / 47 kohms
Dimensions
Width: 800 mm (31-1/2")
Height: 96 mm (3-3/4")
Depth: 70 mm (2-3/4")
Height: 96 mm (3-3/4")
Depth: 70 mm (2-3/4")
Weight
1.75 kg (3.86 lbs.)
MEMO
TINSEA282AWZZ
09A R AS 2
TINSEA290AWZZ